• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Any tips for replacing APS CAM 870 Ejector? (Part APS-CAM055)

THE CRAB

Members
Joined
Dec 2, 2021
Messages
21
Reaction score
3
APS-CAM055.webp

Hi everyone,

Got a gen 1 870 where the ejector is showing it's age. Any tips on how to release the pins holding the old ejector in? Looks like I'm going to have to drill them out, is that right?
 
Look up Explosive Enterprises you tube channel they have a video on moding the CAM870.
 
Turns out you need a highly specific, impossible to find tool. Oh well.
 
rivet punch 3.webp

This is wrong, but gives an idea (this example is for a much larger rivet). It's called a rivet flanging punch for semi tubular rivets. The problem is the outer diameter must not exceed 4.5mm for the depth of the ejector plate. I suspect APS must have made their own tool.
 
Back
Top