nemokingdom
Members
- Dec 14, 2022
- 2
- 0
hello! Need some help estimating the value of a few guns:
Classic Army M15A4 C.Q.B. Compact SEAL - Bought this gun for £100 on this forum, it was repaired & upgraded by Negative Airsoft, it has an optical mosfet, new gears, hop-up unit, shoots in semi and 3 round burst and there's videos of the work if you want to know exactly whats inside. Been used twice since then, shoots at 300fps, it's quite picky with mags, I've got an ares 9mm conversion kit with 12 lowcaps in it currently. Sometimes shoots a burst on semi if you slow pull the trigger.
TM VSR 10 Pro Sniper - Bit of a ongoing project gun but parts have minimal wear. The Novritsch stock currently on it needs some work as the mags are very tight fit, the old stock is supplied however. There is also a small hole in the outer barrel above the hop up unit where a TDC used to be. Only thing that's stock is the outer barrel, trigger guard and the bolts, I have all the old TM parts and you can almost build the original gun, also an extra cyma trigger box & cylinder assembly. Would be £600+ new. It has the following:
Action Army CNC aluminium receiver
Novritsch ssg10 stock
AA teflon steel cylinder & head (didn't like the teflon so it's polished instead)
AA zero trigger & piston
AA m150 spring (cut to around 475fps)
AA spring guide
AA hop-up Chamber
Maple leaf 70 degree autobot bucking or Stock bucking (unsure what's currently in there)
Panthera concave nub
Longbow guide ring and cylinder sleeve
stock TM Inner barrel
Hawke Scope
Harris-style bipod & stock pouch
View attachment 99258
View attachment 99259
View attachment 99260
View attachment 99261
View attachment 99262
Classic Army M15A4 C.Q.B. Compact SEAL - Bought this gun for £100 on this forum, it was repaired & upgraded by Negative Airsoft, it has an optical mosfet, new gears, hop-up unit, shoots in semi and 3 round burst and there's videos of the work if you want to know exactly whats inside. Been used twice since then, shoots at 300fps, it's quite picky with mags, I've got an ares 9mm conversion kit with 12 lowcaps in it currently. Sometimes shoots a burst on semi if you slow pull the trigger.
TM VSR 10 Pro Sniper - Bit of a ongoing project gun but parts have minimal wear. The Novritsch stock currently on it needs some work as the mags are very tight fit, the old stock is supplied however. There is also a small hole in the outer barrel above the hop up unit where a TDC used to be. Only thing that's stock is the outer barrel, trigger guard and the bolts, I have all the old TM parts and you can almost build the original gun, also an extra cyma trigger box & cylinder assembly. Would be £600+ new. It has the following:
Action Army CNC aluminium receiver
Novritsch ssg10 stock
AA teflon steel cylinder & head (didn't like the teflon so it's polished instead)
AA zero trigger & piston
AA m150 spring (cut to around 475fps)
AA spring guide
AA hop-up Chamber
Maple leaf 70 degree autobot bucking or Stock bucking (unsure what's currently in there)
Panthera concave nub
Longbow guide ring and cylinder sleeve
stock TM Inner barrel
Hawke Scope
Harris-style bipod & stock pouch
View attachment 99258
View attachment 99259
View attachment 99260
View attachment 99261
View attachment 99262
