AGM MG42 Magazine attachment sheered off

P

Protegimus13

Members
Joined
Nov 26, 2017
Messages
3
Reaction score
0
Hi, I recently bought the AGM MG42. The drum magazine fits on the side attached by two metal clips that are both part of one flip up metal piece allowing access to the bb feed. One of these clips has sheered clean off! I dont even have the bit that sheered off to weld back on. Ive been searching for a replacement part online but cant find anything. The piece can be removed and replaced but Im not sure if you can get them?

Does anyone know what this bit is called or if I can get a replacement. Or if there is an alternative fix?

Many thanks (new to airsoft) 

 
Did you buy from a retailer ?, even a non uk one, should be your first port of call. If bought s/h, then look for a retailer for them, be much easier to follow the supply chain than to track down an obscure part from a rare gun.

 It's what I'd do

 
It may be worth including a few photos of the magazine where the part has sheered off.  May help someone identify the part, etc.

 
Last edited by a moderator:
Tackle said:
Did you buy from a retailer ?, even a non uk one, should be your first port of call. If bought s/h, then look for a retailer for them, be much easier to follow the supply chain than to track down an obscure part from a rare gun.

 It's what I'd do
Click to expand...
Click to shrink...
Hmm bought knowing it was damaged, great price but not much use if I cant get the magazine to stay on. I will head to Patrol base my local airsoft shop and see if they can help. I thought about welding the magazine in place but then realised it might be a safety issue when at a skirmish heading back into the safe zones.

 
Until one is found, make one and pop-rivet it in place....I had to pop rivet the lower right rail on where the cocking handle is....

 
You must log in or register to reply here.
Back
Top