Abbey Vertex nozzle filling issues

[Musica]

I can't seem to fill my TM 5.1 hi-capa magazines from my vertex can. The gas isn't going inside the magazine just spraying back.  It's not the length of the nozzle as I tried even with the base plate off. 

Here is a picture of the can side by side with my 2.0 nuprol can.  Anyone any ideas? 

View attachment 50897

 

[EDcase]

Look at the diameter of the magazine fill valve.  You will probably see that its smaller than normal.  I have the same issue with a KSC Auto9.

I haven't found a way around it yet.  There may be an adaptor...

 

[Musica]

I don't have another gas magazine to compare against just three  5.1 TM hi-capa magazines. 

I did only try 1 of my magazines so might have a fiddle see if it's perhaps the magazine at fault. 

They sell an extender nozzle but not sure if that will help or not.

https://www.amazon.co.uk/Abbey-Gas-Canister-Extension-Nozzle/dp/B00TB05F2I/ref=sr_1_2?dchild=1&keywords=Abbey+Gas+Nozzle+Extension&qid=1571667042&sr=8-2 

 

[Musica]

got the nozzle and it helped can be a bit messy but I got my magazine filled.

View attachment 51106

View attachment 51107