11.1v lipo in a dmr

[joshcowin]

hi their just having a idea for a dmr and wanted to know it would be possible to put a 11.1 lipo in and it be locked to semi with a mosfet and not need to upgrade the gearbox too much.obviously because its not on full auto it wont ruin the gearbox as quickly. thanks

 

[Samurai]

Yes, that works. Actually sometimes a 7.4 won't be enough for a dmr so 11.1 is a must.

 

[jcheeseright]

Yeah, if I had a semi only AEG if definitely put an 11.1v (maybe even 14.8 if I had room) in there, you want the gearbox to cycle fast!

Make sure you get an active braking mosfet though or you might end up 'double firing' sometimes.

 

[joshcowin]

room wise would be tight as i will probably do it on a scar h ssr,but a 1600 11,1 would be max size,im looking at getting a ascu fitted hopefully

 

[Ian_Gere]

If this is a long term project, you might want to wait and see how I get on with the Burst Wizard BW3 MOSFET I've just ordered, because it's a lot cheaper than an ASCU and has more functions, for eg you can program it to enforce a pause set between 0.2s and 2s between shots (which some sites require you to mentally comply with when using semi-auto sniper rifles/DMR's), plus it allows pre-cocking which gives trigger response equal to a springer.