rockford22

For sale is my semi-auto mechanically locked M14 DMR build based on a Cyma M14. Had fun building it but I've recently focused on a HPA bolt action build so this is not getting much use. I am selling this a project gun for an experienced tech (or someone keen to learn gunsmithing) to take on and continue to develop in to a great DMR platform. The rifle comes with a whole heap of premium upgrade parts but needs that final tweaking from someone with more patience and expertise than me to get perfect. Please read the description IN FULL. The base setup includes: 1) Cyma M14 with 3 x Cyma Mid-cap magazines with conversion to accept Deans battery 2) Cyma scope mounting system with picatinny rail for optics mounting 3) ZeroOne 11.1v Lithium Ion (Li-on) 2500mAH 15/30c battery with Deans connector The upgrade parts coming with the gun: 1) ZCI Stainless steel tight bore barrel (installed) 2) Maple Leaf Hop up rubber and Omega Nub (installed) 3) ASG Infinity motor (installed, note - terminals had to be filled down slightly to fit within the receiver) 4) Full Guarder M14 SP120 gearbox upgrade kit which replaces virtually every gearbox component (a combination of standard and upgraded guarder parts are install on the gun, see photos - if you cant see an upgrade part, it in the gun! I found that not all the Guarder parts fit perfectly so used a mixture of OEM and upgraded parts in my build) 5) Titan Gate Warfet mosfet Its about £500 worth brand new and most parts have seen very little use. The good: The motor is incredible, trigger response is very snappy when used with pre-cocking on the mosfet Shoots around 1.6j (c.420fps on a 0.2g or about 290fps on a 0.4g) and during testing was quite consistent The rifle itself is in very good condition with very few marks or scratches The bad: Recently experienced a very intermittent issue where the mosfet will stop the gun from firing. Removing and re-attaching the battery clears this immediately. I suspect it is mosfet or wiring related but this is something the new owner will need to investigate. Sometimes it shoots a full day's airsoftwithout stopping, sometimes it shoots 10 rounds and then stops. The wiring and soldering on the gun is far from my best work, I would suggest the buyer re-wires. Trigger assembly has been mechanically restricted to semi-auto only by removing parts. This means the selector switch no longer works and spins freely. I will include some of the removed trigger assembly parts but to be honest I cannot remember if I had to cut a a part down or not. Not sure why you want this to be full auto again anyway. The Li-On battery is great but is too large to get in to the hatch in the stock. You need to unscrew the base plate entirely to attach to the mosfet. Not a big deal but FYI. Its a Cyma...what would be the dust cover on the real steel is just crap and falls off if you rack the fake charging handle. Perhaps you can fix...I didnt bother. As a result the top of the gearbox (visible through the top of the gun without the dust cover) has been sprayed black. Trust me, you wont notice. Collection only from Ringwood, Hampshire area. Also Happy to meet potential buyer at any airsoft skirmish in Dorset and Hampshire to handover. Please provide UKARA membership no if you wish to buy.

For sale Gate Nano Advanced Active Break (AAB) MOSFET. Bought for a project but never needed as I switched to an optical trigger based Titan mosfet instead. Collection near Bournemouth, Dorset or postage for £5.

**Sold pending collection on 4th August. Will re-advertise if falls through** For Sale my upgraded Tokyo Marui 416D Next Gen Recoil Shock AEG. New price of £879. This RIF was purchased directly from Combat South’s with their “Level 3” upgrade pack installed which includes: 1) Professionally installed M95 Spring 2) Combat South’s custom S-Hop tuned specifically for 0.32g BB’s – the consistently is incredible 3) Titan Gate V2 Advanced Mosfet 4) Conversion to deans connector. This RIF is simply stunning, outshoots practically everything with a snappy electric blow back. The advanced Titan Gate V2 mosfet (£160 new) connects to your phone and allows infinite control of every setting imaginable plus diagnostics and statistics. This, combined with deans Conversion and a 60c burst LiPo battery gives insane trigger response, comparable only to a HPA setup. This RIF shoots extremely consistently at around 325fps (on 0.2g approx 0.95 joules) allowing it to be used at both CQB and woodland sites. I would recommend 0.32g BBs to get the most of the hop up and accuracy but it will shoot lighter weight BBs without issue. Package includes: 1)Tokyo Marui 416D NGRS in original box including Marui Mid Cap magazine 2) Nuprol 30c/60c (burst) 1450mAH stick battery 3) All upgrades mentioned above Some cosmetic wear and tear as expected but condition overall however is very good. Collection only from Bournemouth however I would be happy to meet up at any local airsoft site in Dorset, Hampshire or Surrey to test/handover. Reason for sale is simply that I am moving on to an AR15 HPA platform and therefore don’t want two very simular RIFs (life is too short for that!).

For sale my brilliant Tokyo Marui 1911 Nightwarrior custom gas blow back pistol. Comes complete with original box and all manuals. Shoots brilliantly, just like you'd expect from a Marui 1911. Some light scratches on slide from being holstered but otherwise in good condition. Selling as changing my loadout theme. Collection from Bournemouth or any local airsoft site in Dorset,Hampshire, Surrey or Wiltshire.

For sale is my very lightly used Cybergun Desert Eagle CO2 powered fully automatic airsoft pistol. The size and recoil of this thing is hilarious...and then you switch it to fully automatic. Slide is fully metal. Comes complete with original box and instructions. In great condition, has only had a few mags through it. Collection from Bournemouth or can meet you at any local airsoft site in Dorset, Hampshire, Surrey or Wiltshire to handover. Will consider posting at buyer's 2expense. Message me and I will get a quote.