Bran_da_Don

For Sale is a used and unmodified TM MP7A1 GBB SMG with 4 spare TM magazines. The original box is included too with all the manuals, magazine, 14mm ccw barrel adaptor, barrel cleaner rod and even the origional pack of BBs. * I seem to have misplaced the two dry fire mag followers however IF i find them then I will send them your way free of charge if this RIF has already been purchased. * The TM MP7 Is truly a fantastic bit of kit. Out of the box, It has a good spread at range and is precisely accurate in CQB. In terms of power, It consistently sits just a few digits under the 350 FPS limit when I’ve used it - very spicy! This RIF is loud and has strong recoil. It makes for a fantastic immersive experience when skirmishing. I often used the 14mm ccw adaptor to stick a loudencer on the front and it often made my teammates jump! The shoulder stock is collapsible with a closed position and 3 open positions to choose from. In terms of rail space, you can find a long piccatinny rail on top with removable flip up iron sites, small rails on both sides and a folding grip underneath. The fire selector switch has a positive click when moving between safe, semi and full auto and the charging handle and bolt release is really fun to play with. Also in this sale are an extra 4 mags bringing the total to 5x 40 round magazines - Plenty of firepower to get you going! This MP7 is in a good used condition. It is fully functional with some minor cosmetic wear that I have tried my best to photograph. Mainly wear where I’ve mounted attachments to the rails and 2 of the 4 sling attachment points are worn from where I’ve attached slings in the past. One issue I have encountered with this platform is not to do with the gun itself but rather the 5 magazines (or possibly all TM MP7 mags?). They all hold gas however sometimes they like to dump all of it when the trigger is pulled. It looks like the valves get stuck in when this happens and you have to manually try and get it back out. I’d say it is roughly a 40% chance of this happening every trigger pull. I’m still at the point in my airsoft journey where I like everything to perform great out of the box so with my lack of airsoft tech knowledge this mp7 was a pre-mature buy on my part. I’d imagine you may know already how to fix the magazines? Or just HPA it as the actual gun itself is 100%. Sold as seen, No refunds, No postage with RIFs - cash on collection ONLY. The first time I tried posting a RIF it got ‘lost’ so I wont be doing that again! Any questions, feel free to send me a message. Thanks for looking.

I acquired this USP from a Marshall at my local site; It has some issues and I currently lack the experience to fix it properly as I’m fairly new to Airsoft. If you know what you are doing then this would be a great project gun to fix up! Issues i have identified: 1) Right side slide catch broken - metal teeth that locate into the left slide catch inside have broken off. The left side works fine so the slide still functions properly as long as you’re not left handed!) 2) Safety doesn’t function - Right side switch feels loose 3) Missing front iron sight - I understand that this is a common problem with Airsoft USP replicas? 4) Leaky magazine - I think the culprit is a seal lower down or the baseplate on the bottom of the mag 5) Dumps gas over a couple of trigger pulls - currently not suitable for a game day I will need to see a valid defence/proof that you are an active airsofter before I can ship this RIF/arrange a collection. Any questions or for more photos, feel free to get in touch! Advertised elsewhere, Open to offers, Sold as seen, no refunds, Cash on collection or PayPal. I can post to mainland UK addresses for an extra £10. Thanks for looking.