Jamoy
-
Posts
30 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Jamoy
-
This advert is COMPLETED!
- For sale
- Used
FPS: 330 This is one of my first custom guns. It started as a cheap JG MP5 SD5 and I purchased an ICS Metal body kit which was not cheap. Dropped in a reinforced V2 Gearbox and a stronger spring and a better motor. Wired it to Deans and put it in a NANO ASR Mosfet and it purrs like a kitten. Wired to deans. It's not the most accurate gun for long range but for its intended usage is up close and personal. It certainly does the trick. The metal magazines have a little issue with feeding and I have had to modify them slightly to fit into the gun. The plastic mid-caps work flawlessly. 4x Plastic Mid Caps 3x Metal Mid Caps 1x Metal High Cap NANO ASR Mosfet With Serial Number Matched Box H&K Style Claw RIS Mount£160
, Fife
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I am willing to offer a 20% bulk discount if someone buys all the remaining kit. I have reduced several of the items below. Prices are as follows, they match up with the image i have put up. C1: JEFFTRON Switch Brake - 2.50 C2: AK-74 Flash Hider - 5 C3: M120 AEG Spring - 4 C4: M100 AEG Spring - 4 C5: M90 AEG Spring - 4 (I tested each spring in a springer using .2 g bbs and a chronograph to determine their strength) D1: SOLOGNAC Sling - 2.50 D2: FMA Fan-Assisted Goggles Multiple Inserts - 5 D3: AR-15 Delta SOPMOD Stock - SOLD D4: Various Fore-Grips - 4 Each (Classic Grip Sold) D5: Vector Optics 30mm Medium Height Scope Rings New - 10 D6: Genuine Kriss Low Profile Sights - 25 D7: Nikko Sterling 1x50 Reflex Dot Sight - SOLD D8: Nuprol 7.4 Lipo 1450 Mah (DEANS) - SOLD COLLECTION / LOCAL DELIVERY ONLY*** D9: WE 11.1 Lipo 1450 Mah (DEANS) - SOLD COLLECTION / LOCAL DELIVERY ONLY*** D10: NUPROL Lipo Balance Charger - 8 D11: Left-Handed Genuine IMI Glock Belt Holster NEW - 15 D12: Right-Handed FOBUS Glock Belt Holster - 7.50 D13: DBoys / Double Bell GP-25 Grenade Launcher (Not Working - See Below For More Info) - 50 D14: Airsoft BB Bag (Baw Bag) - SOLD D15: G&G Raider RIS (See Below For More Details) - 8 D16: Ergonomic Marksman Grip (No Baseplate) - 5 GP25: The launcher is not working as it does not retain the shells so im basically selling this as spares and repairs with the 3 MOSCART's Still worth it for the price of the shells alone. D15: I think it's missing a screw piece that screws onto the receiver. Could be a nice spare for anyone who needs it.NO VALUE SPECIFIED
Leven - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Prices are as follows, they match up with the image i have put up. E1: OD Templar Assault Systems Double Pistol Mag Pouch - 5 E2: MTP Molle 40mm Grenade Pouch - 5 E3: MTP PLCE Yoke and Battle Belt - 20 E4: MTP Molle Water Bottle Holder (Holds a Bottle Of Green Gas Nicely) - 4 E5: FDE Generic Bungee Double Mag Pouch - 5 E6: OD Templar Assault Systems Smoke Pouch / DMR Mag Pouch -5 E7: MTP MOLLE PLCE Webbing Yoke (NEW) - 10 If you buy everything i will give a further 10% discount.NO VALUE SPECIFIED
Leven, Fife - GB
-
This advert is COMPLETED!
- For sale
- Used
NUPROL M4A1 SOPMOD DELTA Practically brand new and shoots well, wired to deans. It is accurate out to about 50m the last time I used it and has an excellent rate of fire. I put an upgraded spring. It has silver plated wire fitted with a NANO ASR Mosfet. Shoots great with 11.1 Lipos. The Keymod rail included with this somehow had its threads stripped so I put the original hand guard on and included it for free.I was planning on putting an after-market receiver on this but I have not gotten around to it. A great upgrade-able base platform. Price Reduced£180
Leven, Fife - GB
-
This advert is COMPLETED!
- For sale
- Used
FPS: .2g @ 330 FPS Description: One of my older guns but has stood strong throughout the years. Still running at a consistent 330 FPS. Excellent cyclic rate with a SRC Magnetar High torque motor inside. It is wired to deans with silver plated wire and has an excellent trigger response, i have used 11.1 lipos with this gun with no issue. I have mostly spiced up the furniture on this gun. It has a Zenitco DTK-1 Crown-style muzzle break, with an RK-3 style pistol grip. Full Ris dust cover and a GP-25 Rubberized butt pad to replace the plastic one that kept falling off.£200
Leven, Fife - GB
-
This advert is COMPLETED!
- For sale
- Used
Dboys AKS-74M Description: Extremely low FPS. I want to give this one away cheaply as well. It shoots fine just extremely anemically. It will likely need a service. Wired to deans. The exterior is slightly rusty and no matter how much gun oil I put on it it still continues to rust. At least it adds to the character. I will accept Collections And if possible could Arrange drop off if economic enough.£50
Leven, Fife - GB
-
This advert is COMPLETED!
- For sale
- Used
WE G39C A great gas gun that I have not had the chance to use much. It shoots well on cold days more than some gas rifles. The recoil on this is what drove me to buy it but I simply did not get around to using it. It's in fairly good condition and I am positive I have fitted an NPAS to this gun but not 100% so i have brought the price down. Only one of the magazines does not hold the bolt open as I think the spring inside the mag has fallen out or become broken. A good gun for a serious gas blowback shooter. I have somehow lost two of the rails on the original hand-guard. This one came from Mil-spec solutions with a fitted precision barrel as stock. Includes: 6x 30 Round G39 Magazines (1 Mags Hold Open Doesn't Work) G36E Style Full Metal RIS Rail B&T Mock Suppressor Stubby Fore Grip Original Handguard Original Flash hider One Point Bungee Sling I will accept Collections And if possible could Arrange drop off if economic enough.£225
Leven, Fife - GB
-
Okay i was having a think and tinker with the gun the other day. The tech that had tried to previously fix this gun must have jammed in tiny springs on the wrong side of the nozzle. These springs were like maybe 1 cm long? It was causing the nozzle to not seat correctly, you notice the gap of about 4 mm on the underside of the slide. I assumed that this gun didn't have any slide springs as they usually fall out easily as i am careful to not lose these springs, however guns seem to perform well without them. I took these tiny springs out and the nozzle now can fully reciprocate and the gun now closes into battery flawlessly now. The thread can now be closed.
-
Yea i completely disassembled, cleaned and rebuilt the gun and sprayed with some silicone. Ive not got the mag as the previous "tech" my mate gave it to lost it (yea i know). Il need to see if i can source a mag for it next pay day and give it a shot.
-
Hey, here you go....
-
Hello, my friend gave me this old Glock 19, it has no trades on it but i think it is a KWC / KWA glock 19. Serial Number COP471US which when googled appears to take me to pages with KWC/KWA Glock 19 info on it. Basically the gun has this weird issue where the slide will not fully enter battery for some reason. you have to apply significant pressure, more than a few pounds to actually get the slide to travel fully forward. This causes issues where the hammer will light strike the magazine flow valve and the gun will not cycle. Even with the return spring installed its not nearly enough force to push the slide into the forward position resulting in the issue described above. I have attached images of the gun showing the issue. Any idea what is causing this? I think it may be an incorrect nozzle in the gun? A video demonstrating the issue: https://streamable.com/kudgqc
