Szelwa
-
Posts
19 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Szelwa
-
Time Left: 4 days and 20 hours
- For sale
- As new
hello got spare pins for hi capa 2 lengths one for normal grip one for magwell - should fit most (tried on my 6 and all good) 2£ each happy to post at buyers cost£2
Grays - GB
-
Time Left: 4 days and 20 hours
- For sale
- Used
Hi Thanks for looking. selling JG G36 used but still fine for back up or entry game rif. Just rebuilt gearbox with new piston, piston head and possibly a nozzle - don’t remember swapped barrel and put maple leaf rubber. Shoots 300fps on 0.2 BBs with current spring. comes with 2 mags. PayPal welcome. Buyer covers the postage.£55
Grays, Essex - GB
-
Hi all. I hope someone will be able to share some ideas how to fix my problem. I just finished fitting mancraft v3 into the Specna Arms G36 (same as ares). Took me some time with dremel to make it fit into gearbox as original mancraft v3 gearbox would not fit at all in the gun. Trouble I have is that rif is feeding 2 bbs at the time. I adjusted and tested length of the original nozzle than swap for the 24.5mm one dedicated for G36 for better air seal. Swapped hop up as well as tested 2 different mags hi cap and low cap TM. To no change. Worth to mention I had same problem on this one while it was aeg.
-
Time Left: 47 minutes and 36 seconds
- For sale
- Used
Making space so would be happy for those to go. TM Hi Capa 4.3 upper - no front sight, no nozzle housing. Hi Capa Guarder used nozzle housing very light 16g metal 4.3” outer barrel for Hi capa Golden mag base plate HI capa Bunch of AAP bits - not cow cow but original parts swapped out before use. 5x M90-100 springs g36 plastic hop up 3x pistons all with first metal tooth plastic but decent G&G sights 2 brass and 2 alloy inner barrels please pm for individual prices and postage.£4,321
- GB
-
This advert is COMPLETED!
- For sale
- Used
TM hi capa all working but sometimes upper gets stuck at the back I’m sure it can be easy fix but I have no patience to dig into it. it has new cow cow grip ready for custom stippling. I’m adding original grip that has some rubbed off pattern and slight burn. Tried to show it on pic. Price included PayPal and postage.£70
- GB
-
This advert is COMPLETED!
- Wanted
- Used or as new
Hi I’m looking for hpa adapter for action army/ WE 39/36 GBB£50
Grays, Essex - GB
-
Time Left: 1 day and 18 hours
- Wanted
- Used or as new
Hi I’m after G36 lower/ pistol grip. Only from Ares/Specna Arms or Umarex as they are all the same. thx£1
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Hi I’m looking for magwell pin for hi capa.£3
, Essex - GB
-
Ok folks following this I’d like to report that spring from hi cap mag on g36 does fit and does the job. All tested and shooting. How long will it last …? thanks for the tip.
-
I’ll have a look in an hour and report got g36 and m4 hi cap mags busted
-
Hi all Correct me if this should go to different topic group. In my WE gas drum the anti reverse spring gave up - see pic. Searched internet but only can see one place from HK offering replacements. Is anyone aware of replacement for this part of some technical name for this spring to be found outside Airsoft suppliers. I can’t believe that quite expensive part would be useless after lil spring gave up. and yes my mate was spinning it in wrong direction lol
-
Hi still having this problem? did you try playing with trigger adjustments? Most probably it’s one of the gears inside, those can wear off just from looking at them too long. One of AAP features. I’d suggest fitting new cow cow set and add auto sear as well for good measure.
-
This advert is COMPLETED!
- For sale
- Used
Hi and thx for looking. For sale I have A&K m14 with faux wood comes with hicap mag and scope mount. Outside condition is good for with some minor signs of use. It never been skirmished just gathered dust. Tried to bring it back to life and use, I've fitted brand new Cyma gears (was £50 itself) wired to deans and new hop up unit. Shot few test shots at 350fps with nice range and grouping and now it stops shooting only in full auto will squeeze couple of shots after trying trigger couple of times. This is too much headache for me to strip gears and test it. But for someone familiar with it or looking for Autumn project this should be easy fix. can add old gears and hop up bits as well. Due to its size I’d prefer local pick up but we can work postage as well. msg at 07940744979£50
Grays - GB
-
This advert is COMPLETED!
- For sale
- Used
Delta Armory Charlie Ar15/M4 2020 series Great starter piece of kit. Lightweight . Wired to deans. Comes with two mid and one highcap mag plus three base plates. £85 including postage and PayPal fees£85
- GB
-
Time Left: 4 days and 18 hours
- For sale
- As new
Glock conversion kit for G17, G18c Put together tested and went back to a box now surplus to collection. £75 incl postage and PayPal fees£75
Grays - GB
-
This advert is COMPLETED!
- Wanted
- Used or as new
Looking for new or good condition used AAP01 lower.£30
- GB
-
This advert is COMPLETED!
- Wanted
- Used or as new
AAP01 new or used posted to Essex£40
Grays - GB
