WonkyBoi

Hi, Please help me value my MP7A1. I have replaced the original gearbox with a WE MP7 gearbox as the original cracked. It fits exactly the same and works as the original. Everything apart from the gearbox is original. There is wear and tear overall, with one of the sling points broken off, as a result was replaced with a dedicated QD point on the rail. The front outer barrel thread is completly gone, so any flash hider sits at an angle and affects the trajectory of the shot. The included front adapter included allows for 14mm ccw attachments to be used, however not with the stripped thread of the outer barrel. Included are 6 original TM small mid caps, and 6 off brand mid caps. Also included is a EXPS3 holo red dot. PEQ battery box included. The battery insert is on a standard deans connector. Thanks in advance.

Better yet, why dont you buy a used rif, that will be cheaper than new, you won't need a UKARA for, get it as a set with a case, multiple mags, batteries and everything you need to get you started and enjoy. A UKARA is one of those things you need to BUY NEW rifles from shops online. You technically need it when selling rifs online, however I never see anyone actually check. So you can just go buy a non two tone rif on used websites and enjoy. You can also buy a two tone rif and remove the colour at home yourself, these use cheap spray on paint, theres multiple posts regarding using rubbing alcohol and decolouring them.

I have a Tokyo Marui HK416D NGRS, and I am looking for an upgrade of spring for it. I have read online that there is no issue swapping in a stronger spring on stock internals so I do not have to worry about wrecking it, I am just looking for recommendations of springs. There does not seem to be a major selection of springs available, having myself only found these: https://www.combatsouth.co.uk/cyclone-7-m100-spring-for-ngrs-series/ https://eagle6.co.uk/product/eaglesix-m100-spring-for-m4-ngrs-aeg https://www.davescustomairsoft.co.uk/bespoke-airsoft-stel-tek-m100-spring-for-tokyo-marui-next-generation-recoil-shock-series https://www.airsoftwholesaleuk.com/product/fps-m100-100m-s-steel-spring-for-tm-ngrs/ https://www.krale.shop/uk/spring-eagle-6-m100-for-tokyo-marui-ngrs/ I have also found this one which is stated as a TM next gen gearbox use, however from the picture you can see it is a non linear spring. https://www.davescustomairsoft.co.uk/next-gen-hardened-steel-spring-m90-m100-m110 Due to the TM NGRS relying on multiple springs to operate as designed, the spring operating for pushing the piston in a linear spring, and these are also known to be shorter than other AEG springs. I am wondering if there is anyone with experience or has leads on good brand of spring for my scenario. Guarder, PDI and Prometheus do not seem to supply NGRS springs. My intended goal is to squeeze out as much power out of the gun as possible, as Japanese limitations on AEG springs result in TM often running M85, so I wanted to upgrade to something more capable to fling heavier ammo. With possible changes later on such as inner barrel and buckig to aid this, for now I will just try a stronger M100 spring. I have had someone recommend eagle 6 springs but I am wondering if there is someone more informed on the topic to be able to shed some light on this for me. Thanks in advance!