davidf

Thanks mate. I will ammend my order then. I did measure it (not with calipers) and it seemed it was closer to 1.17inch But I will trust you over that

Hi all, Do I need a Commercial Spec MOE Stock or a Mil-Spec MOE Stock for this buffer tube? 5KU Picatinny 5 Position Buffer Tube with Adapter Thanks

Thanks! I was pretty certain. But, its always a good idea to come ask the community before hand

Hi all, Anyone know if this pistol grip is compatible with the TM Saiga?

And I can use any branded AEG m4 mags. So I could get a 5x pack of specna arms aeg mid caps and that would just work in the VFC hpa mag adaptor?

What's the best way to balance npas and psi? Would you open the npas all the way and the manage the psi. Or utilise both?

Thanks all. I did consider co2 and it starts strong but in 1 degree C night games it slugger later. Will be very careful starting 70psi moving slowly to 100/110ish to make sure its all good Thanks all! I think this is the one I need for my n4 https://airtac.me/products/vfc-apfg-m4-hpa-adapter-modular?variant=48572369010979

Hi all. Getting tired of how sluggish my GBBs have been the last 2 gamedays due to how cold it is at the moment. Browsing websites like Airtac, but, not sure what magwell adaptors I need for the following items. Hopefully, if I share a list of rifles I am looking to get adaptors for, you can help me with some direct links So here goes; VFC A+ N4 Noveske GBB VFC SR25 ECC GBB Krytac Kriss Vector GBB Thank you!

Hi all, I recently tried changing the pistol grip on the receiver of my sr25 vfc gbbr. I actually haven't even fielded it yet. Its brand new. I tested it on chrono with one mag - added an NPAS - then did the above with the pistol grip change. The new grip i got didn't fit so sent it back. Now I have installed the old one again it has messed with the firing settings. Was: Safe + Semi (locked) Now: Safe + Full Auto What might have happened? All I did was remove the stock grip and then put it back on. I was very careful to not lose any parts when changing grip, and still have both the springs that the grip holds in the lower receiver. Any ideas?

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes.

Thanks for the response @Lozart I assume that means this would work nicely? https://www.brownells.co.uk/ERGO-GRIPS-AR-15-AR308-FLAT-TOP-SUREGRIP-AMBI-BLACK-Polymer-AR-308-AR-15-430104876 Thanks

Anyone know which pistol grips are compatible with the SR25 VFC (GBB) platform? I did test a spare MOE+ grip but its shaping was way off. Looking for something that is just more comfortable that the stock grip it has. Thanks all

Also @Justjay1986 would you recommend this nub 50? https://highpressureairsoft.co.uk/collections/gbb-hop-up-rubbers-nubs/products/unicorn-airsoft-hop-up-nub-50-degree-for-wetmkjwvfc-umarex-gbb Thanks

Thanks mate. What sort of range do you get of the 50°? I too am running .32s on green. @Justjay1986 also. Why not go for thr 60°? https://www.empireairsoft.co.uk/vsr-gbb-flamingo-bucking-60-degree.html

Hi all, Recently picked up this and looking to change the stock rubber and barrel as they are filthy + the rubber is damaged. Any recommendations on inner barrels + lengths And rubbers to go with. Also if the nub should be upgraded? Links would be helpful, thanks all.

Thanks for that info!

Thanks for that mate! The 7.62 pmag AR variants is what I'm after. Only seems VFC have models like this. I mean if TM did one. I would be all over it. I'll do some more research into the M110k1 then, and step away from the sr25 ecc. As I mentioned, I won't be running this at long range. Would be a mid range weapon that I'm looking to consistently hit 30/40 metres running .32s on green

Hi all, Long and short of this is. I'm considering selling my AKX to get a sr25 (more interested in the appearance) Looking to understand if either the sr25 or the m110k1 is reliable. Won't be running as DMR. Will be running as if an ordinary AR with max engagement 40metres. But they seem to get a bad rep. Failing any answers that are positive. I will get a TM mws and just modify it to have the longer look.

Thanks everyone. Been super helpful

No idea mate. The mag it came with "its air tight" . Leaked immediately. Soo haven't been able to field it. Only just found the time to look back into it now After looking at the KWA mags. I think you right. I will see if I can find somewhere. They seem to be sold out mostly

Literally doing that as you sent the message through I got this on here from a seller saying its TM. So i just assumed it is/was Hope this helps

I went to Socom Tactical in Fleet.

The shape of them must have been different as they were very tight in the magwell and also didn't go all the way in. In addition the gas release value sat at a complete different height. Sadly I have taken them back now so didn't get a side by side comparison. The chap at the shop said I need the other one not the E2. But couldn't guide me any further

Hi all, Trying to find new mags for my TM P226. The only ones I spotted at my local were the e2 version. Didn't fit. If someone can help me in the right direction for the ones I need that match my leaking one that would be great