aragoth

Hello chaps 
 
I am selling my m1 carbine 
 
I have owned this 6 years from new in. 
 
Tons of money has been spent on this to get skirmishable !! 
 
Extras 
Original para stock m1a1 
 
Ww2 Ethiopian (from marking) wood stock that I modified to fit. (Fitment is perfect) 
 
M2 carbine nozzle so it will work with green gas and co2 
 
Spacers fitted so fires around 350fps 
 
M16a1 sling repro (vietnam loadout) 
 
NOW! the mags !! 10 of them to be precise, these are the worlda most expensive mags and the co2 ones cost £60 each and the green gas ones £70 !!!!!! It has taken alot of years to build this collection and alot of cost !!! I belove there are all gas tight apart from one co2 magazine but it is a simple fix with some grease. 
 
In total this gun cost me 
King arms m1 -£400 
Ww2 stock - £150
7 co2 magazines - £350
3 green gas magazines - £225 
Sling - £20 
Nozzle -£35 
£1180 !!!!!!!
 
So of you are wanting a new skirmishable m1 look to be spending the same 
 
Happy to post via parcel force 
 
Would potentially consider swapping for another GBBR 
 
Or collection in worcester 
 
Ollie 
 
 
 

Scope and magnifier just for show and not included*
 
As real as it gets!
 
Puts a smile on your face, fun as hell to shoot and see all the shells ping out the ejection port.
 
Collector bought a few months ago fired twice then kept on display these are £1200 and 30 metal shells (not used) cost £112 new.
 
These things as far as I can tell come into the UK once every 2 years at best.
 
Purely for the collectors or film makers out there because I would absolutely NOT recommend airsofting with this.
 
The plastic shells are considered temporary because they will eventually distort and jam the gun hence the reason I bought metal shells.
 
Co2 bulb will clear approximately 1 and half mag before it needs changing which is why most owners go the HPA route.
 
Happy to chuck in a load of co2 bulbs too.
 
Aluminum build with steel reinforcement for the high ware areas and fitted with an Angry gun mini mock silencer, original furniture will be included too.
 
UK only

Scope and magnifier just for show and not included*
 
As real as it gets!
 
Puts a smile on your face, fun as hell to shoot and see all the shells ping out the ejection port.
 
Collector bought a few months ago fired twice then kept on display these are £1200 and 30 metal shells (not used) cost £112 new.
 
These things as far as I can tell come into the UK once every 2 years at best.
 
Purely for the collectors or film makers out there because I would absolutely NOT recommend airsofting with this.
 
The plastic shells are considered temporary because they will eventually distort and jam the gun hence the reason I bought metal shells.
 
Co2 bulb will clear approximately 1 and half mag before it needs changing which is why most owners go the HPA route.
 
Happy to chuck in a load of co2 bulbs too.
 
Aluminum build with steel reinforcement for the high ware areas and fitted with an Angry gun mini mock silencer, original furniture will be included too.
 
UK only

GHK Steyr Aug A2 GBBR
Good condition, all working fine.
1 leaking mag, parts are included to repair it.
steel gas block upgrade (not fitted)
4 magazines in total and spare parts for them. Sight attachment for RMR, torch, etc.
standard valve installed, high and low power valves included.
mag repair tool.
 
 

As the title states, I’m selling my hand-built m16a1/2 rifle with m203 launcher.
 
the included receiver(s) are; NOVA m16a1 machined aluminium m16a1 receiver (the current receiver) and the included m16a2 receiver is an Angrygun m16a2, also aluminium, also machined receiver. 
 
Both are great, the NOVA one is slightly better quality, but not accurate to the rest of the rifle, if you’re particular about build accuracy. 
 
As for the rest of the gun, the entire front end is a g&p steel a2 front end, with the classic cheese-grater handguard for the m203. The launcher is also g&p. 
 
The stock is also g&p, and is very well built, as are all the g&p parts.
 
trigger group is a GunsModify steel internal/alloy body fcg. 
 
Bolt carrier is a Hao milled steel BCG, with a GM v3.5 nozzle and a NPAS keeping it at 1.1j, despite the 390mm IB. 
 
Buffer tube is a full length buffer system, accurate to the m16, with an appropriate full length spring and buffer. 
 
I spared no expense when I built this, and as a result, this is the only aftermarket MWS build I’ve ever encountered, or built that runs BETTER than a stock Marui, at a cost of over £1200, at the time of building. 
 
Magazine not included, though I could potentially include one for additional cost. 
 
The only thing missing to install the AG receiver is a hop unit. As the gun has spent its entire life as a wall hanger, I’ve never bothered to finish swapping the receivers. 

Any further questions, please feel free to DM me. Potentially open to splitting the RIF and the receiver. 
 
Collection near Brighton preferred, but can be posted at buyers expense. 
 

Up for sale is my beloved KSC M11A1 fitted in the very solidly made Alpha Parts kit with full steel outer barrel, lower and upper body and stock. Comes with the correct Ingram trades as well.
 
The weight feels almost like the real version. The quality of this kit is top notch. Almost new condition and never fielded, as seen in pics taken from every angle.
 
Internally only less than 150rds have been brrrr-ed from this thing. With one original gas tight 48rds mag.
 
£320 posted
 

VFC M249 GBB

Comes with:
16x Cassettes 3x Gas Boxes (One might have a leak im not sure but still works, and one with damaged side cover as seen in image) Original parts, bipod, stock, handguard VFC railed handguard, para stock, heat shield.
Internal changes:
CL Project NPAS
Price: £1200 will be paid via Paypal G&S.

Would much rather collection due to the size from my local site as I cant personally drive, as well lets you try it in person first.
Ill be there on the 8th Sept next hopefully. (Location is set to my local sites address)

I dont want to do splits but might be tempted by trades of some kind.
Selling as after the milsim i just attended I much prefer running a rifle or smg over this. Love it for larping but unless strict ammo limits are in the rules just isn't that fun for me as anyone else with like a HPA m4 has a better lmg with mid caps.

Collector. only kept on display.
 
Will add more pictures soon with scope etc
 
This is a beautiful piece that ive very proudly had on display.
 
When these were first made the initial batch had the metal (Zinc die-cast) Cerakoted after that batch they released a basic version without it, this rifle is roughly 9 years old and bought from a Japanese collector that like me had it mostly on display.
 
It is in excellent condition and ive been reliably told by other collectors that it could handle red gas easily.
 
Has period correct scope and sling, comes in original box with manual and 10 shells that I think are made out brass.
 
Recently applied a boiled linsead oil coating on the walnut stock.
 
As always would love this to go to a collector.
 
Can post but would prefer a pick up due to how giant the box is.
 
UK only

Collector. only kept on display.
 
Will add more pictures soon with scope etc
 
This is a beautiful piece that ive very proudly had on display.
 
When these were first made the initial batch had the metal (Zinc die-cast) Cerakoted after that batch they released a basic version without it, this rifle is roughly 9 years old and bought from a Japanese collector that like me had it mostly on display.
 
It is in excellent condition and ive been reliably told by other collectors that it could handle red gas easily.
 
Has period correct scope and sling, comes in original box with manual and 10 shells that I think are made out brass.
 
Recently applied a boiled linsead oil coating on the walnut stock.
 
As always would love this to go to a collector.
 
Can post but would prefer a pick up due to how giant the box is.
 
UK only

Collector
 
This is brand new, never skirmished only test fired (not even 1 mag)
 
Has very strong recoil and a heavy trigger pull.
 
Mostly polymer build (like the real thing) with some steel internals and weighs a nice 2575G
 
A unicorn of a GBBR, my understanding is there was a very limited batch released to the world so there cant be many in the UK and I consider myself very lucky to own one.
 
Have the box, instructions etc. I am happy to throw in the metal picatinny rails but the attachments are not for sale.
 
Middle aged gamers review on it-
 
 
 
 
 

Collector
 
This is brand new, never skirmished only test fired (not even 1 mag)
 
Has very strong recoil and a heavy trigger pull.
 
Mostly polymer build (like the real thing) with some steel internals and weighs a nice 2575G
 
A unicorn of a GBBR, my understanding is there was a very limited batch released to the world so there cant be many in the UK and I consider myself very lucky to own one.
 
Have the box, instructions etc. I am happy to throw in the metal picatinny rails but the attachments are not for sale.
 
Middle aged gamers review on it-
 
 
 
 
 

Collector so this has never been skirmished only test fired.
 
Sadly the collection has once again got out of hand 🤣
 
This was a passion project from a talented user on here called frontsite.
 
I would encourage you to check out his work:
Full list of upgrades below:
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines New part added - Nova CNC mainspring housing.

Collector so this has never been skirmished only test fired.
 
Sadly the collection has once again got out of hand 🤣
 
This was a passion project from a talented user on here called frontsite.
 
I would encourage you to check out his work:
Full list of upgrades below:
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines New part added - Nova CNC mainspring housing.

Collector so this has never been skirmished only test fired.
 
Sadly the collection has once again got out of hand 🤣
 
This was a passion project from a talented user on here called frontsite.
 
I would encourage you to check out his work:
Full list of upgrades below:
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines New part added - Nova CNC mainspring housing.

Very rare, collecters item in good condition.
 
lovely little Tanaka Colt Government .380 with very rare walnut grips and 2 mags. (Have the original grips but they are quite worn) 
 
Mostly made from abs with metal in the functional moving areas and weighs about 300g. 
 
Only test fired a couple of times with 144a gas, never skirmished.
 
For transparency on rare occassion it jams but normal routine of ejecting the mag and racking the slide sorts it out. Someone with more experience of fixing airsoft might be able to nulify that.
 
Would not recommend skirmishing as the fps is around 160-180 and honestly not sure if it would stand up to the demands of an airsoft skirmish.
 
Would love to see this go to a fellow collector and give it a good home.

Collector never skirmished and only fired 2 c02 bulbs worth through it, kept and displayed in immaculate condition. 
 
Umarex is doing the S&W magnum name proud with this full metal, fully trademarked, rubber gripped replica! It weighs in at a meaty 1250g (with co2 bulb) 
 
You cannot skirmish this thing because according to the box this is firing at the rather flaming hot 3 joules and my chrono has a seizure when trying to measure the fps, but hey magnums are supposed to be powerful right? 
 
Great fun loading the shells and a fun shooting experience. 
 
Only trade id be interested in is for the Umarex SAA co2 in nickel if possible!
 

This is my last New model army revolver I own, originally had four! Had this a few years now, never skirmished, in amazing time warp condition, only fired at the range twice and few times at home to get gas thru it etc, works and shoots lovely, cocking action is lovely sounding and solid.
This was a later version that came with plastic grips but I swapped them out for wooden ones, one of these has a little x on the bottom, no idea with that! 
This comes with everything from new, all paperwork, tin, tools box and even the red barrel stopper.
You'll be lucky to find another one of these and certainly not in this condition with everything from new, real collectable piece.
 
Collection welcome or postage via royal mail special delivery at £12

This beautiful custom 1911 was purchased from another user here on the classifieds a while ago and has spent its life as a display piece. Having to sell it on due to finances. I payed £450 for it at the time. Asking £380 for it now.
 
It is a TM MEU based 1911 fully upgraded with a rare, custom-order guarder kit along with fully steel/stainless external parts and upgraded internals. It took a lot of headache (and money) to get it spec'd out exactly like a RS Springfield Professional 1911, Hopefully if you're into 1911's you would appreciate this is the original 1911 model that passed the FBI HRT trials, and also was the base for the well known MEU pistol's late variants. Even if you don't care about that stuff, it's a beautifully kitted out pistol nonetheless, and as far as I know the only one in the airsoft world that sports the original Professional look.
 
The gun comes with the pistol itself and 2 magazines.
 
Price is £380 - includes PayPal fees and postage
 
I've listed the full list of upgrades below - split into upper and lower assembly for convenience.
 
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines  

Collector, only had this a few weeks, bought for £450 from UK site, never skirmished.
 
**Lost the original nozzle restrictor** but fires at 300 fps without barrel extention and 350 fps with it
 
I have replaced the pistol grip with a milspec Magul MOE+ grip, happy to through in the original grip although it does have a few scratches on the bottom (see pic)
 
Optional: I have the 1913 picatinny rail adapter for it too
 
Parcel force express48 will be used, full tracking details given.
 
UK only.
 
Would prefer to sell to regulars on these forums with positive feedback.

Collector, only had this a few weeks, bought for £450 from UK site, never skirmished.
 
**Lost the original nozzle restrictor** but fires at 300 fps without barrel extention and 350 fps with it
 
I have replaced the pistol grip with a milspec Magul MOE+ grip, happy to through in the original grip although it does have a few scratches on the bottom (see pic)
 
Optional: I have the 1913 picatinny rail adapter for it too
 
Parcel force express48 will be used, full tracking details given.
 
UK only.
 
Would prefer to sell to regulars on these forums with positive feedback.