danf1234

Another noob question regarding home bottle filling. I have been watching a lot of you tubes, and I am right in thinking that the fill valves on HPA regulators are one way. so once the pressure is drained from the line at the compressor bleed screw it is safe to disconnect the line. There is also no danger of bleed back if a half full tank is connected to be topped up?

So have read all that thanks and looked at what is out there I have decided on a ninja v3 it’s a 4500 psi reg and the output pressure in set at 550 psi from the factory. Sounds perfect to me. https://www.justpaintball.co.uk/products/ninja-pro-v3-regulator-4500psi

I need some help please. I bought and Armotech 1.3l 4500 psi tank to work with my storm cat 5. But I ordered it with out a fill regulator on it as I didn’t realise. What fill regulator will work with this set up please?

I have sent an email to VFC customer service to see if that’s a possibility

No my gun but this is a pic of the lower. I would want it permanently fixing to semi for use as a DMR

Has anyone locked the HK417 to allow it to be used as a DMR? What’s involved and what parts are needed?

Do you need the Wii Tech inner barrel to use the Wii tech silencer. I have just Wiitech only supply a 13.5 mm barrel were most inners like pro arms are 14mm. Do the threads mix?

Do you have a link for that Barrel?

Could someone please tell which is the correct 6.03 laylax barrel for the TM G17 G5. Is it the 97mm 6.03 for the Glock 18c?

Does anyone know if the HAO FAST take down pins fit the TM MWS?

Did you find anything?

Is there on anyone on here that can help. I am looking for a lens protection solution for a Hikmicro Thunder 2.0 19mm. I can’t find anything that would suffice. Has anyone come across something that will work on this scope?

I have one, with a fair few modifications. It’s a great RIF and performs brilliantly,plus it uses Glock mags. biggest pain is there is no holster that works with the mod slide mounted RMR

Has anyone fitted the Volante full travel bolt to the TM AKM yet? It’s pricey but looks to add some realism.

Has anyone got any experience of fitting the G&P MRE Full Front Set Kit. I was wondering what the fitment is like?

I am selling this very high end RC stuff for anyone that might be interested.

This thread is lethal 😂

Just finished the whole thread end to end. I am currently serious ly considering an M4A1. I currently have an MWS MK18, AKM, KSG and an MTR. I just love the look of the M41A, I think I would have to change the rail to something a little longer so it extends further down the barrel though

Thanks for the reply. Yes it’s just the little aluminium part that sits in the nozzle. I aren’t too bothered about the FPS, just trying to get the best consistency that is all. I haven’t needed a spare nozzle yet, but when the day comes I have some G&P on standby until I can source some TM originals

I have managed to get my Madbull adapter working on MWS mags. There is a serious knack to being able to do though. Mag at a certain angle, adapter at a certain angle, more pressure than originally thought etc. now I can fill the mag easily in one go, but it cost me a half cylinder of propane working it out. The only other question mark is around the metal nozzles, but seeing as all my gas cans have metal nozzles bar the maintenance gas, I am not too bothered about that.

I am on page 213 of the MWS thread and haven’t come across a reference (I don’t think). What does the dynamics precison nozzle valve do if fitted in a stock MWS. Is it a significant jump in fps. I bought some parts second hand and there were 2 brand new in the bottom of the box.

So does mine now. I had the strip it down and lube the centre pin and o rings though What is the consensus on metal valves. Personally I prefer the positive connection of metal on metal