navyvet86

For sale is my KWA USP Match with 4 leak free magazines and a parts gun & magazine. Used a few times so finish is a bit beaten. Ideally don't want to post but can do if required, otherwise I am frequently at Gunman Airsoft Eversley Alpha and Bravo

EMG utility compact SAI
 
Brass weighted rear grip
SAI barrel and thread protector
SAI knurled RMR cut slide
 
High contrast raised Glock sights
Pink rear sights trijicon logo
High contrast glow post trijicon logo
Gold adjustable trigger
Holosan 507c red dot sight
Inforce APL-C clone light
Enhanced recoil spring
Short stroke buffered
 
48hr post

Sig Sauer (by Sig) p320 M18 X-Carry
 
Comes upgraded with the following (but not restricted to) items:
 
- Japanese hammer rotor bearing and collar
- 150% steel recoil leaf spring and rod
- RMR sights
- Raised front sight (high contrast)
- G&P ultralight blowback unit
- Enhanced nozzle 
- Gas pedal takedown lever
- Silencer Co. Threaded barrel
- Tyrant Designs flared magwell
 
That's what I can remember so far. She's a beautiful build,  and a lot of time has gone into making things feel right and the work that needs doing, but nobody likes to, such as...
 
- Sanding the nozzle ridges out flat for better seal and decreased resistance.
- Polishing the rails to 8000 grit for smoother operation.
- Polishing the contact areas on the blowback housing.
- Silicone grease on all moving parts.
- Silicone oil on moving parts that need to have minimal resistance.
 
Looking for £365 no furniture or £435 with accessories
 
Thank you for looking 🙏 

Dropped this right down for a quick sell
it wont stay until after the weekend so if interested just drop a message
 
**surefire x400v now NOT included**
**SRO now not included**
 
High rate of fire custom aap.
 
Please feel free to drop a message for videos of trigger response/ rate of fire etc.
 
 
Custom frame
Grips
Extended mag release
Mamba slide kit
6.01mm power up full length inner barrel 
60° bucking
Zev magwell 
1x 23rd magazine
1x 49rd magazine 
Grips
Thumb rest
Super lightweight bolt
Adjustable slim trigger
150% recoil spring
200% nozzle spring
Cowcow rainbow buffers 
Strike industries red dot mount+cage
Sotac SRO
Lightweight Ruger mk.IV fire selector
 
 
https://streamable.com/5psfjv
 
https://streamable.com/f26cdg
 
 
There is more but I just can't remember right now.
 
The gun is... One of the most instantaneous and high RoF builds ever. It is an absolute dream to use. And with the lightweight bolt etc the efficiency is crazy on it 

Fully trademarked G45
Metal slide
Boxed like new, has been used for a short game, had 2 mags through it max! 
Includes two magazines both gas tight
 
Minor paint scuff on rear corner of slide.
 
would trade for a P226
 
£100 + postage 

A new custom build
 
This is the harder to find full dust cover (frame goes to the end of the slide) version of the EMG licensed by Staccato
Has a Dawson Precision magwell, upgraded "master" grips, spike face flat race trigger, ACRO custom mount and many more extras
I've spent a lot building this, and I love it, but I already have my Staccato C2 so would consider a trade for a nice full custom G17/G45/G19X
Must be a custom build SAI/FI/ZEV etc  
 
Please send a picture in your message with the Glock you are wanting to trade
 
Thank you

GHK M4A1 2023 Forged Version 
Lowering price to £700
Maple Leaf GHK Hop Chamber Maple Leaf 250mm 6.02mm Hybrid Barrel AG Ambi Airborne Charge Handle PTS QD Sling Plate PTS EP Trigger Guard  GHK Fixed Fire Control Pins RA-Tech Tactical Bolt Catch  Magpul Grip Magpul Stock GHK NPAS Nozzle  RS AR15 Carbine Buffer (moving weights)  
Comes with
5x GHK CO2 mags (all work but well used, one damaged to rear but doenst impact use) Spares… (npas nozzle, stock nozzle, hammer, valve knocker, o rings, feed lips, ML Hop rubbers etc)   
Due to value/post insurance limits, collection Cambridgeshire 

ICS L85 carbine
 
this has never let me down and sounds awesome does have general wear and tear marks. 
 
SHS high toque motor
13:1 gears
Warfet installed, it will also come with the programming card,
ICS tactical rail so you can add a Susat etc
no mags
Deans connection with battery included 
 
single shot works as it should aswell as full auto.
 
has a Daniel Defence Rail and a generic scope will come with it unknown red dot. 
 
I do have the original parts somewhere and will be included in the sale also if found 
 
£250 posted including Parcel Force 48 tracked.
 

 

A new custom build
 
This is the harder to find full dust cover (frame goes to the end of the slide) version of the EMG licensed by Staccato
Has a Dawson Precision magwell, upgraded "master" grips, spike face flat race trigger, ACRO custom mount and many more extras
I've spent a lot building this, and I love it, but I already have my Staccato C2 so would consider a trade for a nice full custom G17/G45/G19X
Must be a custom build SAI/FI/ZEV etc  
 
Please send a picture in your message with the Glock you are wanting to trade
 
Thank you

Glock 19 used at 1 match only. Don’t really play air soft anymore have The 3/4 full gas bottle and full bottle bullets. Original box too. RRP £169.99 as seen on last pic. Need gone ASAP hence the price 

For sale my FNX45 internally stock comes with everything pictured you could also mount a red dot works very well sorry to see it go but life!

For sale, collectible Tanio Koba USP, in very good condition, boxed with 3 gas tight mags and correct suppressor. Has a 3D printed rear sight, and one mag has had a seal repair. Not really sure how to price this, will listen to offers.
£265 all in, posted and paypalled.
Price drop.

VFC VP9 Custom
 
VFC VP9
VP9 metal threaded barrel
Thread protector
HK high sights / RMR mount (TM)
Crusader enhanced recoil rod
Crusader enhanced recoil spring
Efficiency bulb
1x mag
Holosan 507c clone red dot
Surefire x400 ultra clone
Flashlight-strobe-red laser
 
This uses the standard VP9 slide (better finish) 

I am offering for sale RFID Domination Timer (DOMINATOR) 2.0. Fully assembled device. It is a stopwatch in the style of a chess clock, which counts the time for which the active team has been on the point. Suitable for a game with 4 teams, can be modified for only 2 teams. Each team player is equipped with an RFID card or an RFID bracelet. RED, GRE, BLU and ORA (Red, Green, Blue and Orange Team) teams are integrated into the game.

After attaching the tag to the reader, the player occupies the point and tries to keep it for as long as possible. After casting, time is added to the given team up to a maximum resolution of 99 hours, 59 minutes, 59 seconds. When a team is active on a point, its LED with its affiliation color is also lit.

In addition to a member of the other team, the time counter can also be interrupted by the Referee with his card - he pauses the current time until the moment when the card is re-applied to a member of one of the teams, or the Eraser, which also resets all times.

I deliver together with 30 RFID cards, while 7 cards are reserved for each team, one each for the Referee and the Eraser. I will send by post prepaid second class. It is possible to use only 2 teams in firmware so 14 cards per each team.

The PCB is fitted with all components. The reader, microcontroller, and display can be replaced in the event of a malfunction by simply pulling it out of the pin strip without the need for soldering. Can be powered via a power bank. Power supply via a 9V battery possible after connecting to certain pins (soldering required).

The PCB contains 6 mounting holes for the possibility of mounting the DOMINATOR on the wall or in wood. 4 of them use the display, can be replaced with a threaded rod.

The device is neither waterproof nor waterproof. Must be operated indoors. The enclosure for the DOMINATOR is not designed. I also supply the .hex file for the microcontroller, so you can upload to the new microcontroller once you change it, but you can also copy it to more devices. So you can create multiple RFID Domination Timers around your Airsoft playground. Each of them will react on the same RFID cards. Firmware is compatible with Arduino Uno, Nano or standalone ATmega328P chip with external 16 MHz oscillator only). I am not sending PCB design, only available for firmware if bought separately.

There is a cut-out in the back of the DOMINATOR through which you can access the potentiometer of the display and control its contrast. It is especially useful if the DOMINATOR is operated in the winter or, conversely, in the heat. It is always necessary to make a contrast correction at a given temperature, otherwise the display is unreadable (you will know that state if it is required.).

The number of cards and bracelets in the system can be increased in the future, while I will have to create the firmware that will support them. There, the price is already individual. Domination Timer supports RFID cards and wristbands of the ISO/IEC 14443-A standard (MiFare 1K), which work at a frequency of 13.56 MHz.

Price does include post fees.

Project description:
Button Domination Timer (DOMINATOR) is a device - stopwatch for sports such as Airsoft, Paintball. The stopwatch uses an Arduino control microcontroller (Arduino Uno / Nano) or a separate chip (Atmel) ATmega328P, which controls the entire system logic. The stopwatch includes an LCD character display measuring 16x2 (16 characters x 2 lines), or 20x4, on which the times of individual teams are displayed. There are 2 teams in the game - RED team and GRE team that play against each other and occupy the imaginary point that is formed by this device - DOMINATOR. At the beginning of the game, the display shows the times 00 hours, 00 minutes, 00 seconds for RED team , GRE team . Button Domination Timer uses button input for the action of occupying a point by a team member, as well as for input of a referee and eraser entity.

Thus, a total of 4 buttons for 4 system entities. Buttons are connected in INPUT_PULLUP mode. Pressing the button feeds the GND signal to the Arduino digital input terminal (Active-LOW switching signal). In the basic version, Domination Timer responds immediately to a press - the time counting for a given team is activated (the length of the press, the number of presses, etc. are not verified ...). The times are displayed on an LCD character display measuring 16x2 or 20x4, which communicates with the control microcontroller via the I2C bus. If a team member of the RED team occupies a point by pressing a button, a buzzer is triggered, which announces a change in the point with a short beep. Then the RED team's LED at this station will light up and the display will start adding time for that team. If the point is occupied by the GRE team and a team member presses the appropriate button, the buzzer sounds again, the GRE team LED lights up, the RED team time is paused and the GRE team time is calculated, which point he occupied.

If the organizer (referee) presses his button, both times are paused until a member of one of the teams makes user input. This type of input is thus suitable for starting a break, but can also end the game for evaluation. Button Domination Timer has a fourth button for the eraser entity, which pauses and resets both times to initial values as after starting the Button Domination Timer stopwatch. Used to restart the game, initialize a new game. The project is suitable for Airsoft events, sports facilities, or Airsoft teams, which can build the equipment. The advantage of the Button Domination Timer system is that it can be cloned and create X points with the same configuration via machine code, which can be loaded into an unlimited number of Arduino boards and chips and guarantees identical application operation. Players can thus score more points in the game, while at the end of the game the time is added up as long as which point was occupied by which team. There isn't available PCB design for that project.

The principle of functionality of the Button Domination Timer project on the hardware side:
Buttons are connected in INPUT_PULLUP mode, they use an internal 20 kΩ PULLUP resistor, which holds the logic level HIGH on the digital input. When the button is pressed, the LOW signal is fed to the digital input. Based on the button type and the firmware version used, the Arduino can verify the button hold length, while the counter logic is executed independently (the counter is active while the button is held). When the condition of the change at the point is met, the Arduino triggers a buzz, applying digital states to the LEDs. System logic is executed every 1000 ms - 1 Hz routine (timed via the millis() function, i.e. via Timer 0), regardless of the state of the digital inputs. In this routine, an active team check is performed, followed by time. Time is dynamically plotted on a 20x4 or 16x2 LCD character display. Display communicates with the Arduino via an I2C bus with a clock signal (SCL) of 100 kHz - Standard Speed. Rewriting of the display thus takes up to approx. 15 ms, while only the line of the given team that is active at the point is overwritten. With serious interest, the firmware for DOMINATOR can be extended to 3 or 4 teams.
 

Delivery of firmware of Button Domination Timer:
Software is delivered in machine code (.hex) at your mail for the ATmega328P architecture. It's compatible for Arduino Uno or Nano boards, or you can use standalone ATmega328P chip. Machine code cannot be modified on your side. I have two versions of firmware, one is for button press, other is for button hold for action. Button hold is limited to 5 seconds, it can't be modified on your side. I send both versions of firmware to each customer. 

Firmware (.hex file) can be uploaded to microcontroller via Xloader: https://www.hobbytronics.co.uk/arduino-xloader
Or more experienced users can use AVRDUDE via console. For Arduino boards use 115200 baud/s upload speed. For Arduino Nano V3.0 clone use 57600 baud/s (Old Bootloader), otherwise firmware will be not uploaded.

Maximum time range that Button Domination Timer will show on display: 99 hours, 59 minutes, and 59 seconds
Power consumption: approx. 20mAh with 5V power supply. Convenient to power via power bank, charger from a phone with USB output.

Shareware firmware
Project can be tested for free with your hardware before buy or payment. There is available firmware on project's website. Firmware let to use project will all 4 entities (RED, GRE teams, Referee, Eraser), there is limitation of measured time up to 15 seconds for each team. It is mainly used to test whole compatibility of firmware with your hardware. In test version you can't test version of firmware with button hold (5 seconds of button hold to do change on point). Buttons in shareware version reacts immediately on press. Full project (paid) is available without time limitation, max visualised time: 99 hours, 59 minutes, 59 seconds. Firmware have implemented AUTO-I2C, so you can use any I2C LCD character display, it will automatically detect it.

Also if you don't have hardware right now, you can try Shareware firmware of Button Domination Timer directly in Wokwi simulator for free:
https://wokwi.com/projects/333897447732413011

Project website (available firmware, schematics, etc...): https://martinius96.github.io/Airsoft-DOMINATOR-RFID/en/button-dominator.html
 
Hardware for the project - Button Domination Timer:
Arduino Uno / Nano / standalone ATmega328P chip LCD character display 20x4 / 16x2 I2C converter for LCD display Passive buzzer (optional) 2x LED diodes 2x resistors (1x 220ohm for GREEN LED, 1x 1kohm for RED LED) 2x pullup resistors (optional for I2C bus) 4x pushbutton (connected in INPUT_PULLUP mode of operation using internal resistors)

Asg raffica n 2 green gas tight mags
Full n semi auto
Retail £200 with 1 mag
Gone hpa just sitting in the box
£90 ono all in posted
 

Custom dvc Staccato c2 ,3.8 hi capa with 5.1 grip.
Magwell,and metal hi mount ,fibre optic f&r.with rmr mount and facility for chanrging handle,polished barrel.
Full size mag with extended magbase.
Used but literally only a few mags.never skirmished.****streamlight and rmr ,not included,for demonstration of how it can look only****

** interested party - held until 01-04-23**
 
VFC MP7 gen 2.
 
Started life as an A1 but I converted it to the A2 with a aluminium rail conversion kit. The gun itself is a gen 2 with a NPAS nozzle with adjustment tool.
 
Optic is the genuine top tier SPINA model (£180+tax+post~£230) it is dual reticle and can run red dot on solar power, has batteries for low light though. 
 
VFC MP7 A2 gen 2
NPAS nozzle
Thread adapters
Tools
SPINA dual reticle solar optic
High mount
DBAL
Surefire scout
Pass through dual switch
Carry bag with hard foam
4x genuine VFC mags
RVG grip
Aluminium rail
Surefire clone silencer (beast, super high quality with 11mm CW adapter)
HK swivel sling mount 
 
Has no cracking to the back plate or any significant signs of use. Never dropped.
 
As always trades of similar modification considered if you can travel
 

Tokyo marui hk45 mint condition
With threaded outer barrel ready 4 tracer
Kicking at 316fps
would guess upgraded some how as stock fps listed at 300fps

Comes with 2 extended tm mags
(1 with nine ball router)
5 standard tm mags
1 extended donner mag leaking n
missing spring
So total 8 mags 7 gas tight n holding long

Silencer

Pistol is mint n only used a few times to test.
Solid build with a big kick
Selling as ain't getting used
Total paid just under £600
Yours today £240 PayPal n post

Specifications: Trijicon SRO Red Dot Sight
Magnification: 1x Reticle: Red Dot 5 MOA Illumination Source: LED powered by CR2032 battery Battery Life: Over 3 years of continuous use  Adjustment Range: 150 MOA Total Travel Housing Material: 7075-T6 forged aluminum SKU: SRO3-C-2500003 UPC: 719307615793 Included in the box: Trijicon SRO Sight, One (1) CR2032 Battery, Lens Cleaning Cloth, Product Manual, and Warranty Card.
 
Only Ship in the UK.

Good condition, very bright and never used in game.

Features: SIG Sauer ROMEO1PRO Reflex Red Dot Sight
Molded glass aspheric lens with high-performance coatings for superior light transmittance and zero distortion 6 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog proof performance Ruggedized protective steel shroud included for extreme durability Sig Sauer Electro-Optics Infinite Guarantee and Sig Sauer Electronic Component Limited 5-Year Warranty SPECIFICATIONS
Finish: Black Style: Reflex Battery: CR1632 Magnification: 1x Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Reticle: 6 MOA Dot Battery Type: CR2032 Batteries Included: No Reticle Color: Red Housing Material: Aluminum SKU: SOR1P101 UPC: 798681616541

***BOTH APL-C LIGHTS ARE GONE SO PRICE REDUCED TO REFLECT THIS - TO BE CLEAR, NO LIGHT IS NOW INCLUDED - THANK YOU :)***
 
As always I'm interested in trades for anything of similar modification and always looking for a USP tactical in mint condition too
 
We G19x MOS gen 5
ACRO P2 clone and ACRO footprint (rigid)
Guarder P70 leaf spring (~175%)
Finger grooves removed + stippling
Thread adapter (14mm CCW)
Agency backplate
Agency arms trigger 
Inforce APL-C clone
Trijicon clone high sights (ultra high glow pigment) - charge for 2 mins glow for hours
 
 

CA AR15 body 
Perun v2 Mosfet
T2 20TPA Neodymium ultra torque motor
E&C Black reinforced metal gearbox QD (change spring without disassembly)
SHS 12:1 ratio high speed steel gears
SHS lightweight full steel tooth AoE corrected piston
SHS Piston head
SHS Sorbo padded cylinder head
SHS full non ported cylinder
Guarder SP110 spring
TE metal rotary hop up unit (tracer)
Maple leaf bucking
Madbull 6.01mm tightbore inner barrel
Lightning blade speed trigger

Strike industries FDE charging handle
SAI BCG fake bolt (gold)

vfc Knights armament QD suppressor
Stubby vertical grip QD
Troy QD sling loop mount plate
E&C Buffer tube
Aimpoint M2 red dot clone
Wilcox High mount
Magpul XT rail cover (genuine magpul)
element peq
rs magpul rvg
 
also includes a b6ac
 
after trades, particularly after a gbbr but open to whatever gamed this once since i got it, not for me sadly 

Vfc sig m17
*Only used a hard full of times 
*2 gg mags
*1 c02 mag
*sig air rmr with cover
*kydex holster in coyote 
 
Perfer collection in person and would meet up

SOLD
please do not contact about this item