Joe1210

NOTE:  DOES NOT COME WITH OPTIC
 
Selling my wall hanger!
Never skirmished, since it lives on the wall.
 
Stock internals Real steel TDI Arms X47 rail system imported from the US (used by IDF, RUSFOR, and UKR)  LCT RK6 foregrip  (ZPK-6) Victoptics S6 LPVO 1–6x24  SOLD! UTG ACCU-SYNC optics mount  SOLD! 1x LCT stainless mag and 3x CYMA steel black mags  
No scratches on receiver parts, except very light marks from fire selector (came like that out of the box brand new).
Very slightly marked on the wood of buttstock left side  (see photos).
No wobble, no rattle.
All magazines fit snug without any wobble whatsoever.
All mags feed perfectly without a single issue.
Shoots and functions flawlessly. 
Impeccable condition.
 
 
Will consider selling RIF and accessories separately. RRP prices for the whole package adds up to over £1200!
 
Split prices:
LCT Stainless RIF + 3 extra mags £530 TDI X47 rail system £280 Victoptics S6 LPVO with UTG mount £120  SOLD! RIF + mags + X47 + RK6 (no rifle scope) £750  
£750 for everything as is (minus the optic and gun case).
 
Collection preferred (very close to East Croydon train station). Shipping to UK mainland negotiated separately. 
 
Tested Nov 2024:
Shoots slightly hot but consistently between 280–285 fps, 0.32g BB, hop set to fly straight (1.2J).
I can tune fps down to 1.13J by replacing spring if buyer requires. 
 

1.G&G With Kythera Engine.also comes with rotary hop,  Holo, Suppressor and AFG- £550
2.MTW 9-PDW - with 1 mag,  maxx hop, Stainless steel 6.01 barrel, Maple leaf rubber,  mk14 style rail and suppressor. Absolute laser- £700
3.G&G URX HPA - Gate pulsar, Gate Titan, Gate EON hop, Madbull barrel, Maple leaf Rubber, gate Trigger, Gate Bolt Release magpul style grip and CTR with riser. . £575
4.This VSR is the Daddy! Total scratch build never been fielded. Mancraft engine, short pull spring in it. Internally suppressed, cnc outer barrel, cnc receiver and extended rail, cnc cylinder. Tnt hop unit, crazy jet barrel, fab defence folding grip, maple leaf stock, 70 degree bucking... £500
5.Ares AS02  has a tnt hop, crazy jet barrel and a man craft engine, plus cnc steel trigger and sear £400
6.
TIPPMAN V2 HPA setup as DMR, with aftermarket rail, Stainless barrel and maple leaf hop rubber.Also comes with line for it and bottle.  £350
7. HPA  DMR with Gate Pulsar and Gate Titan 2 built into a G&G Predator. Integral suppressor, Maxx hop unit and Stainless barrel and maxx trigger.  £ 550


If you are after more info message me on here or whatsapp : 07564793067

**REDUCED TO £250 TO CLEAR**
After returning to airsoft after many years I spent months tracking down and building a dream spec TM G17 pistol from my younger years. 
 
This thing is speced out to absolute heaven. It is well cared for but there are small marks.
 
Tokyo Marui Gen 3 G17
Guarder full traded metal kit
(Barrel, Slide and trade marked lower receiver) 
Full Guarder internals (as pictured) with Maple leaf hop up set and barrel. 
4x mags 
Nuprol holster
All original parts come with it!
 
I'm after the new TM G17 GEN5 MOS so I must part ways with this absolute beauty. 
I'm firm on price. No offers.

Ak dmr

Fully upgraded inside hpa dmr
Shoots amazing and straight lifting any weight bbs
Cyma body and barrel
Vs25 front rail with bi pod
Midwest railed gas tube
Rear adjustable sniper stock
Side rail with 32 scope
Inside has mancraft pdikv3 engine . Safe and single
Metal hop unit with Mr hop and flat nub on a 430. 6.01 barrel
3x Bulgarian midcaps

This shoots amazing and really quiet . Looks great and people ask about it all the time

Cerokote bronze 
Polstar Kythera engine
pdi barrel
maxx hop p hop
very Accurate rif and a real head turner

Dead Air Sandman-K style mock supressor (c.140mm long) and flash hider, have a couple brand new ones,  very high quality. Solid construction and solid lockup. Room inside for tracer module/foam. 
 
Price includes postage. 
 

Warrior Pegasus bag for sale in coyote tan
 
Fantastic day sack in good condition and comes with patch pictured. Plenty of capacity and extremely comfortable to use.
 
Warrior Pegasus Bag Day Sack Coyote Tan | UK Tactical
 
Price: £72 posted 

Cyma ak74u
Railed front lower
Side rail with lo red dot
Asg suppressor
Inside has polestar jack with flat blade trigger
Metal asg hop with zci 6.02 400mm barrel( goes thru half suppressor) maple leaf Mr hop with flat nub
Five midcaps
Shoots whisper quiet . Great range

Lct ak74 u
 
Nt3 stock
B19 top rail
B11 bottom rail
B18 scope mount
Pk6 front grip
PTS pistol grip
Sputnic suppressor and fat flash hider
 
Inside has G+G gearbox with following upgrades
G+g etu with perun ungrade MOSFET for programming
13.1 FPS gears
New nozzle . Piston and head
25k g+g motor
 
Hop unit is a cyma tracer version with adapter so can run of same battery as rif
6.02 zci barrel cut down )
 
This is a cqb monster . Made to run single shot cqb . Amazing trigger response and snappy as hell . Does have full auto but it’s quick and never use it
Comes with four lct midcaps

I bought this custom pistol from Elite shooting years ago now. It cost £390, based on a TM Sig, has had metal slide and outer barrel added, upgraded hop unit, tight bore barrel.

it has been an excellent and reliable side arm, well used but functions perfectly.
comes with 5 mags, rubber grips and case. Not sure if I still have the original grips
 
 

Size large. Test fitted and had a couple of pouches attached but then I decided it wasn't for me.
 
Practically brand new.
 
Price is all in.

Here i have my absolute beast of a dmr custom built lots of upgrades and pkwerd by a kythera engine , had my fun with it but ready for a new project rrp worth about 1300 im asking for 800 will accept offers 

Real steel converted plum AK furniture
 
Fits E&L AK-74 but may fit others
 
Collection from Leeds, West Yorkshire or can post at buyers expense.

Umarex/Vfc HK416a5, rif has an hpa polarstar F2 with an amped igl line, stock hop up, pdi 6.05 270mm with maple leaf super macaron, rs Magpul CTR, a trigger guard hao g-style. Light nozzle spring installed, heavy incl 
 
SF hider not incl, comes with stock.
 

 
£600 
 
 

Wolverine MTW-9 tactical
Maxx hop unit
70 degree maple leaf hop rubber
Comes with 4x mags
Vector Optics Maverick 1x22 Gen II
Original Box
Odin Mag adapter
Odin Sidewinder Included
Tank
Line
Balystiks Reg
Titan 7.4v Hpa battery
 
Asking 800 ONO. Collection only Derbyshire
 
(FYI Kiwi.1 is My discord name)

Selling:
E&l Gen 2 aks 74mn Hpa bundle 
Externals: Fab defence handguards , Combat Union TDK ATG Suppressor , tactical pistol grip .
Internals: Polastar F2 AK engine , combat union hop up , maple leafe 6.02 475mm lenght inner barrel , tnt bucking , maple leafe nub .
Includes 4 G&P ak 74 polymer magazines , tank , braided line 42" , balystic regulator. 
Asking 700£ all included with p&p and postage PF 48H . gorilla fcu

Base - GHK M4 CQB 10.5" V2
 
Never skirmished. Full working order with no damage.
 
Angry Gun L119A2 Rail - 9.25 Inch Short Version
ERGO 2 Suregrip
Colt Ambi Selector
Ambidextrous Charging Latch
Magpul Stock
Magpul type (PTS) Sling Point
Magpul Enhanced Trigger Guard
Magpul type Angled Foregrip
Airsoft Artisan FH556 FA216A Flash Hider
Airsoft Artisan FH556 Suppressor
Sotac T1 type Red Dot Sight
 
No mods or changes of any kind internally (completely ‘stock’ from new).
Barrel has been cut and re-threaded to correct length (14mm CCW by LC’s Engineering Outpost)
Plain, unmarked lower, (so can be engraved with correct trades if required).
2x new magazines (Gas tight, un-skirmished).
 
Price includes UK delivery.
 
*Verification photo shows the L119A1 and L119A2 both for sale in seperate listings.
 

Battle belt setup 
 
-Templar gear concamo green harness
-Novritsch OD Green belt
-Templar gear concamo green fast M4 and pistol pouch
-Zentauron concamo green IFAK pouch
-Zentauran concamo green double M4 pouch
-Zentauran Midi radio pouch
-3 x Novritsch fast M4 pouches
-Black inner velcro belt 
 
Retail is £230 selling for £130 posted 

Tokyo Marui AKX 
I purchased this 2nd hand around 2/3 months and have used once, however need to free funds 
 
has bavtec nub and fps reducer installed 
1 x AKX mag 
4 x AKM mags 
1 x AKM mag with damaged feed lips 
Unity riser 
vector optics red dot 
Torch on m lok mount 
m lok foregrip 
a shit peq (for looks more than anything) 
xcortech tracer unit (original flash hider included) 

£700 rifle plus mags 
£800 with all attachments
 
collection preferred on this one but can post 
free rifle bag if collected 
rushden, Northamptonshire 
 

Gun firing at 296 FPS using 0.28 g BBs thats the legal max i.e 350 FPS on 0.2g BB
 
trade possible at equivalent resale value 

test video available is you supply whatsapp number

Package consists of the following

GHK m4 GBB £740
Angry gun wire cutter front rail £200
Magpul MOE pistol grip £25
Magpul M-Lok Handstop £40
Magpul RSA Sling loop £30
Spare standard nozzle £40
Spare High power nozzle £30
6 new magazines at £85 each £400
Firewolf 3x28 sight £70
total cost is £1645

yours collected for £775  posted £800 due to the value collection is recommended but i will post

Umarex (VFC) HK416a5
Well used but great Condition. Works great on both 7.4v & 11.1v but on 11.1v the response is unreal. Chrono’s just under 350fps
External
HAO 10.5” SMR handguard
Replica CTR stock in FDE with butt pad extension
Ambidextrous mag release swapped out for non-ambi as it gets caught on everything but I can include the original if needed.
PTS sling plate
Internal
Gate Titan basic,
Short stroked airsoft pro CNC 13:1 gear set
Ultimate piston
Ultimate aluminium cylinder head
Trigger mod to reduce trigger pull.
Warhead black brushless motor
Maxx hop chamber
T.N.T apsx inner barrel and hop rubber
Titan and hop installed by Camo raids and all other work & service carried out by land warrior just last year.
Looking for £450
 
collection from Medway or Crayford
Any accessories not listed above are not included (grip, optic, riser, light & NGAL)

WE XM177 comes with 15 mags(worth£500) pretty much all the mags are brand new and difficult to load! I haven't had the time to use this, preferring the FAL. The gun has stock internals with a restrictor disk fitted to lower its fps and shoots really well. Looking for £550 posted within mainland UK if you're in the Highlands or Ireland, then a contribution will be needed. Any questions ask away

GHK m4 urgi 14.5 
Has ra npas
5 mags with devil hunter cnc lips
Lee's precision valve tool and o rings set. 
Ml hopup set.
Strike indistries pistol grip
Bcm gunfighter vertical grip
Pen speedloader
Stock is going to be the original one. Not the one in the picture.
Has vt spring
Original box aswell 
Vortex not included
 
Wanting to swap for a vfc m110k1 gbb 
 

As new, with only around 30 rounds through it. Never used in game. Comes with 3 magazines, a replica Inforce APLc weapon light, and a Multicam wrapped passive retention holster from HW holsters based here in the UK.
 
The gun looks and feels great. The 19X’s Glock 19 sized slide and Glock 17 sized frame feels great in the hand and is a perfect base for a more modern Roland special type build, as was the original plan for this gun. 
 
HW holsters makes a great product. It is made of kydex and wrapped in Multicam cloth. The gun fits perfectly in the holster and locks with a very nice click. I’ve added a tan Safariland QLS fork to the back of the holster for quick and easy mounting to any Safariland QLS Mount on a gun belt. 
 
I paid £150 for the gun, £50 for the two spare mags, £60 for the holster, £20 for the Safariland QLS fork and £40 for the Inforce APLc replica. Im asking for £260 for all of it 
 
Edit: Lowered to £240

selling my GHK M16A4 build. 

No notable damage, may have the occasional minor wear spots here and there (as can be expected from any airsoft gun) but no big scratches, dents or gouges.
dust cover has some very light surface rust as can be seen in the pics. nothing major though and its a cheap and easily replaced part if you so desired, the dust cover spring is also a little bit soft and not overly snappy, nothing serious though as it still works and is again a simple to swap out part.

build details are as follows

externals:
genuine blueforce gear m16 sling adaptor
M16A2 buttstock 
M16A2 pistol grip
G&P M16A4 M5 ras rail kit (very high quality, generally considered the best clone on the market)
20" steel M16A2 profile outer barrel

Internals
FG airsoft heavyweight buffer (this boy kicks)
Maple leaf CNC rear adjustable hop unit and hop rubber
Maple leaf crazyjet inner barrel

Great gun and a really iconic platform, not enough GBBR M16's floating around. 
Lower is semi locked as I intended to run this at DMR fps levels
Does not include any magazines, i primarily run GHK guns myself and need to keep what mags I have.

New all this with said upgrades would cost shy of £1000 (the m16a4 front end kit olone costs over £200 if you can even find one for sale).

pictured ACOG clone is included in the sale, as is the front sling swivel that i never bothered fitting.