Niels Henriksen, DK

Yep. Sure, programming is nice, but I really just want something that doesn't take up space in the tube and allows me to spam semi. No fancy active braking, precocking or whatever

Nope, I don't have the link. I'll check at a shop. I've installed the safety thingy, so it can't shoot in safe, and I'm only gonna use semi anyway. No rush ATM. But thanks!

First, my apologies if this topic is misplaced. I've just installed a Gate Titan basic (G36). It cycles just fine, but it shoots semi no matter the selector setting (on safe, semi and auto). Did I f up the selector-sticker placement, or is the problem in the gearbox? Gear sensor seems to look fine, backlash is fine.

Thank you. It sounds weird that there's nothing to do, but hey, what the heck do I know. Not even changing COL/switch could eliminate the problem? I will solder on a spare button on the mosfet to the existing system, so I can bypass the trigger on the button for one cycle and go back to semi on the trigger, when it locks. This must do for now untill I find a permanent fix.

Thank you. Any suggestions for fixing the semi-locking? As far as I can see on different threads, it may be a problem with the timing of the COL. A cycle on fullauto (through the Merf) resets the problem. Worn COL? Worn contacts? Misfit between gear and COL? I'm pretty good with my hands, but i'm completely green in troubleshooting.

Hi guys I just cut off some of my selectorplate, so it will only fire semi (DMR rules) However, the switch seems jo 'jam". (Standard V2) I fire a few shots, at then suddenly nothing happens when i try to fire. The part in the switch that slides forward seems to slide upwards, so the trigger runs under it without grabbing it. When it happens, I override the switch (with gate merf) and shoots a single cycle, then the trigger works again. Then it happens all over. Has this something to do with the "new" selectorplate?

Hi guys. I know it's a budget gun. I had bad experiences with the CA25. Does anyone have experiences with this gearbox and heavy springs? I would like to hit 2.5-2.8j (Danish fields allow quite a lot) Will an m160-m170 spring tear up the gears and the box? I'll change motor. I wont be firing a lot.