[taap shop HRU precock for AEP Anybody know anything about this]

Anybody heard anything about this thing_http://taap-shop.net/

Looks like a snappy AEP _ with 11.1 and precock.

 

Might bee and old and maybe dead company but i cant tell web site in in Japan

[Parts for my ASG p-09 Part 30 and 86]

I got part 86 for $2 from KJW but they said that ASG hat the rights to part 30 because it has an logo on it. Shipping to Norway no problem

I found the part 17657 -18116 PART 30 but it cost €20 pluss shipping a whole magazine cost baut €35. thats bas

[Parts for my ASG p-09 Part 30 and 86]

Hi 

Does anybody know where i can get my hands on some part form my ASG p-09 Greengass pistol (- 17657).  The parts i need are the plastic part on the botom of the magazine Part 30 i think. ANd part 86 on the bottom of the handle where you can fasten a lanyard for safty (not to loos the pistol in the woods)

 

Part 30 and Part 86

 

I live in Norway so parts are sometimes har to get my hands on

 

Otto Ødegård

Noggin

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Im trying to get this thing up and running. Stock is is great for me.

 

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Something like this?  My spring fell out before i too the gearbox apart. Should it not be attached to the piston?  Should i go stock £30 or prom £60 (35+25) ? Looks like the TM is both head and piston for 30 pounds.

 

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Hi again

Have managed to open the gear box. The motor is a bright orange nupol so thats not stock i think.  Im not sure i can identify what is causing my problem but i got some pic 🙂

 

The gear looks like it has been filed down on purpuse, one thooth is missing.

 

 

The other gears looks fine to me.

 

The tapper plate looks fine but the piston looks realy worne out. 

 

 

Any tips on whats to throw out and buy new?

 

 

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Got the buffer tube open .

 

Looks OK to me . A bit of lube and ill close it up again.

 

Im a bit unsertain about the order of the washers. I think the ballbearing one should be in the middle.

 

Kind regads Otto Ødegård

Norwegian noob.

 

 

 

 

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

On 26/03/2021 at 18:26, AlphaBear said:

The way the top recoil works is via the piston. You’ll see a gap at the back of the gearbox. This is where the hook of the upper recoil unit goes into and when the piston Is pulled back so is the top recoil unit. It’s a clever and effective mechanism. 
 

I’m actually taking my 416 apart this weekend as I’m upgrading it. I’ll take pics if I can. However from your video that clanking sound ain’t right. Take the buffer tube off and show me the spring guide. Also does your spring come out without you taking the gearbox apart. If it does this means the spring has more than likely been upgraded. The clanking sound may be the piston head is loose from the piston. This can happen if the person who did the upgrade didn’t screw it back to the piston properly. 
 

Also check out the Eagle6 disassembly videos. They are really good. Also Dave’s custom does a great video too and also Kingdom of Airsoft. 

 

I finaly got the castle nut off. 🙂

THe spring does com out when i remove the buffer tube.   Here is some new pic's

 

 

So this means i the spring has been changed.   Do i need to open the buffer tube? 

 

THe piston has a little nob inside, right at the bottom.  

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Hi again. Sorry for not posting in a while but we have the longest Easter hollyday in the world here in Norway 😊  And i have tried to contact the seller but no luck  

 I think the nozzle is the right way but ill post some pic’s.  Next on the agenda is removing the buffer tube to see if the spring is loose.  Can i do that without removing the deans? Do i need a special tool to remove the large Nut or is a wrench OK?

[Tm 416d Ngrs Missfeed, Very Low FPS 80fps and No Recoil]

Hei

Just bought a used 416D NGRS. was told the recoil was broken but the rest was good.  Not the case. I am a technical type of person but have not worked on airsoft guns before.  My problem is finding out whats wrong without taking apart the gearbox.. 

Question one. Does the gun function if the NGRS does not work? 

Question2: The Gaspiston thing on the outerbarrel. Is it connected to somtehing ? Or does it just enhance the recoil?

 

Pic 2,3,4,5  shows the gearbox with the NGRS thing  I dont know what to look for to se if anything is broken but the parts move freely and smooth

.

 

Question 3   The littel gismo that is on the back of teh recoil thing (part 416-26) has a chip in it, but it stays on when i fire the rifle

 

 

More pics :

 

 

 

Question  5:

 

The one thing i have found that i think might be fawlty is the nozzle. When i shoot semi the nosel does not come back to the same position. Its  a couple of mm off every other shot.... I got a youtube video showing the problem

 

 Nozzle movment video (youtube)

 

The 416 sounds a bit wrong on auto also

 

funny sounding auto

 

 

OK that was a lot of questions and a lot of pics  but i need som serious help.

Im in Norway so there is not a lot of techs around 

 

 

Thx in advance.

 

Otto Ødegård

 

PS how does i take of the big nut without a special tool?  The one that holds the butstock on?

PPS Sorry for not knowing the  name of al the parts . The only exploded parst view i have found is not in english