Chek
-
Posts
54 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Chek
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This was an impulse buy, about 6 months ago and hasn't even been used outside. Mainly kept as a wall hanger next to my 416 It was painted a horrible glossy green/camo colour by the previous owner which I tried my best to strip down to its natural state but I ended up rubbing away the original paint so I painted over with a flat black. It looks ok, but the markings and trades can't really be seen. There's a bit of green on the rubber end of the buttstock (shown in photos) However, apart from the cosmetics, it's a very decent rifle, well built and solid. Bolt slams closed nicely, it's got good weight too. Bolt locks back without any issues the few times i put a couple of rounds through it. Hit me up with any questions you may have Best way is either email ([email protected]) or wtsap 07763839631 Based in Reading if you want to collect Paypal & post extra Link:https://www.patrolbase.co.uk/umarex-h-and-k-hk417d-gbbr£400
Reading
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I have 3 pairs of 5.11 trousers Two pairs are the ones with '5.11 Tactical' in the waistband One pair with '5.11 Tactical Series' in the waistband There's hardly any difference between them other than the stitching for the knees (you'll spot the difference in the photos) I've had all three pairs professionally altered to fit a 34" waist and a 30" inside leg (I'm a short-ass) and it cost me a damn fortune because of the work involved (anyone who's owned a pair of 5.11s will know they have a very baggy ass and the leg is very long as standard Bought them brand new and paid for the alteration so each pair probably ended up costing me the best part of £100 I'm asking for £50 each. They're in excellent condition, only used for work, not for training or exercises.£50
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Warrior Assault Systems Battle Belt (black) https://www.uktactical.com/product/warrior-plb-belt-black-8730 Only used a couple of times but decided it not right for my requirements Mint condition £50 (buyer to cover PayPal/postage)£50
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I've decided to sell most of my collection, only keeping a few for display purposes. Please contact me regarding your interest, as some are potentially sold (pending), but experience tells me that sales can fall through.... Top row L-R: WE Sig 229R, WA Wilson Combat 4.3, Well 1911 (no mag), Boneyard Cybergun 1911 A1 2nd row L-R: WE Sig 229, WE Baby Hi-capa, Cybergun 1911, Cybergun 1911 A1 3rd row L-R: WE 1911 commander 1943, WE Desert Warrior (Cerakoted), AA Kimber 1911 tan, AA Kimber 1911 black (sprayed black) 4th row L-R: WE Glock 19 (has 2 magazines, just not shown in photo), KWA PTP 1911, RWA Nighthawk, Cybergun 1911 Blackwater I'm guessing that the average price would be around £100. Obviously some are worth less and some are probably worth a bit more, so for the purpose of the classified advert rules I have priced it at £100 but am happy to discuss/negotiate individual prices Pm, 07763839631 or email£99.86
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Unknown brand 1911 No magazine Good condition£80
Reading - GB
-
I recently bought a VFC HK417 which had a loose screw holding the safety selector in place... I don't have a hex/allen key that small so I managed to unscrewed it with some long nose pliers before it fell out itself but now I don't know what size key to use to screw it back in (after spraying the gun), or where to find one that small. The smallest hex key I own is about the same thickness as the screw. Anyone encountered something similar and can advise? Many thanks
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Brand new, ordered the wrong size and can't return it now. Size Small/Medium. For context, I'm a 34" waist so I've had to get the next size up. This listing is for the padded battle belt only. My operator belt it NOT included. Only for illustration purpose to show how it fits. Great battle belt, probably best one I've used so far. Has the stitched molle loops (not the laser cut crap) Cost about £65 brand new. Will accept £50 ONO Paypal/postage negotiable depending on final price£50
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Bought 2nd hand, not realising it was a two-tone sprayed black Some of the original blue can be seen (tried to show this in the photos), mainly inside the slide and just a little by the front sight It has a Kimber engraving on the slide£110
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I bought this a while ago, mainly as a wall hanger as I don't get time to play anymore (work/kids) It needed a little bit of work so I took it on as a bit of a project but never really got time to complete it. It had a normal (crappy) rail fitted which was held together with zip ties so I swapped it out for a KAC rail A few of the small issues which need addressing: The suppressor does not have a fitting in one end, it's just open (see photos). The suppressor actually has a recessed thread which means it hides part of the barrel, all the way up to the front sight. However, it will only fit properly wth the A post front sight fitted, but not with the flip up. Comes with everything in the photos That's probably about it to be honest. If you have any questions, please feel free to get in touch (07763839631 WhatsApp) I've not fired it, I have run out of gas and not bought anymore since I haven't really needed it£450
Reading - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Bought during Lockdown, but never actually used I'm slowly selling some of my gear because I probably won't be using it much anymore buyer covers PP & post£100
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Cybergun 1911 M45A1 (CO2) Some wear Slide catch is a little stiff and doesn't seem to engage... might just need cleaning/lube? I'm slowly selling some of my gear because I probably won't be using it much anymore buyer covers PP & post£100
- GB
-
This advert is COMPLETED!
- For sale
- As new
As new 5.11 tactical trousers (2 pairs available) One pair is perfect and basically brand new condition Second pair has had the elastic in the waist cut so will need to be stitched together (photos available on request) but the actual trousers themselves are in excellent condition also Both pairs are a Medium Short (so will fit a 32" waist, give or take an inch) Looking to sell both pairs for £120 Please contact for more info/photos 07763839631£120
- GB
-
This advert is COMPLETED!
- For sale
- As new
Brand new, boxed, unused USP by Umarex £95 + post (+paypal)£95
- GB
-
I'm pretty new to the sport, and looking for some experienced advice about spares/parts for my 1911 I have a Cybergun Blackwater 1911 (made by KJWorks) which I love the look of and the feel. But I'm thinking of replacing the magazine because I'm not so keen on the big bulky base. Does anyone know if I can get a different mag which will fit/work? I've had a browse on line but I can't tell which will fit.... Pics of the gun and mag below Cheers!
-
I've been looking around for a AR-15 style GBBR and found a King Arms M4 for sale for around £200. Just wanted some opinions about King Arms as I can't find too much info on here really. Other potential buys are VFC and WE Any thoughts/comparisons on these are hugely appreciated!
-
This advert is COMPLETED!
- For sale
- Used
Milspec glock 23 make:unknown purchased On here but unused and unwanted now£85
- GB
-
Thanks for the warm welcome! And for the advice so far. I'll keep researching this site for threads!
-
Hi all I've just recently got into airsoft, mainly by chance.... I used to have a couple of BB guns as a kid before airsoft became massive. Over the years I collected a few blank firers and PFC model guns. More of a collector than anything else. Recently a friend of a friend was moving to Australia and I inherited a couple of his airsoft collection which he couldn't sell before his departure (kind of looking after them for him). He knew I had an interest in them. Due to the current situation, I've not been able to go skirmishing but a bit of info from experienced airsofters would be appreciated. I thought about modifying the look while I'm sat at home. Currently I have a Lonex M4 AEG and a WA para ordinance 1911 (GBB) The M4 has no charging handle but looks as though it should? And I'm thinking of replacing the slide on the 1911 for metal. It feels and sounds a bit cheap and flimsy Thanks in advance! Happy to upload some pics
