Whereismyhammer

It is and thanks for the mag advice folks I will look into it

Hello folks. I’m having pretty consistent bolt lock problems on all three of my mws’s. I’ve moved the stock tube back as suggested in baddabing’s video but still the problem persists. Any suggestions on parts or modifications that would make my rifles lockback more reliably.

Hi folks. I know this has probably already been answered but I can’t find it in this mammoth thread. are the threads on the upper receiver aeg spec, rs spec or proprietary? I’m having an arse of a time getting rails to fit. I am aware that you need the pts adapter to make rails fit properly but it’s actually getting the delta ring to actually do up that’s the problem.

Sorry I’m new and didn’t realise. I will post this there instead.

Removed

I don’t know if you need one you might be strong enough to do it just with the wrench like a normal AR that hasn’t got lock tight in it. I don’t know if they all use the same amount of lock tight on each gun. but on mine I couldn’t do it without fixing the gun in position. But when you have done it once and broken the lock tight you don’t ever need the vice or blowtorch again. You can just use the wrench on its own after that.

I used this as it’s really beefy https://www.fire-support.co.uk/product/gbase-nb-ar15m4-armorers-multi-function-wrench-black

It’s a difficult job to remove as it is secured with lock-tight. I used a blowtorch and an armours wrench + a vice to remove it.

A friend of mine who is more knowledgeable than me suggested the same thing. I took it apart and gave it a clean it was potentially over lubed as you say. Cheers for the advice and I will see how it runs next game. That’s very reassuring. Good to know and thanks for replying

Now that I’ve found out the angry gun barrels are shit I have ordered one of the g&p mws barrels. What do you folks think of those or should I cancel the order and get a z parts one. also had a strange problem with a stock mk18 today. Put about 10 mags through it over a game day today. Used a maximum of 5 shots in one go and the temp was about 16 degrees so I don’t think I had cool down problems. Most mags were fine but on two occasions they behaved as if they were running out of gas halfway through the mag. Any idea what could cause this. Any ideas? And thanks for your input.

Yeah that makes sense. I’ve got the buffer tube they make and it keeps unscrewing it’s own castle nut no matter how tight I put it on

Do they cause problems with how the hop sits or something?

There’s a lot of discussion about the angry gun barrels. Are they all bad? I got an L119A barrel from angry gun. I haven’t had chance to fit it yet. What’s the main problem with them?

Yeah I currently run 4 normal and 1 short mags. Ammo usage isn’t really the concern just thought they looked a bit different. I like the pmag look so I got a couple of iron airsoft pmags but they were shit so I switched to standard tm. Used the iron airsoft ones one summer and they struggled to finish one mag even if it was 25+ degrees. The normal tm mags a great but airsoft is a fashion show so pmags it is. also full auto is banned on the site I go too so I’m not too fussed about it. However the extra gas capacity as has been pointed out by crazy crystal may be helpful preventing cool down in winter. Won’t know about that until I try it or someone reviews it.

Anyone got any experience with the pro win mag or the g&p 45 round mag. Looking for something with a bit more capacity. how is the gas efficiency. How’s the sealing. Cheers