1967PF44

1 VFC/Cybergun FNX tactical with Marui Tac suppressor 1 mag £120 (extra mag available for £30)
 
2 New/unused AAP01-SOLD
 
3 FNX45 civilian version - as new - was used only as a display piece and for a video shoot and social media campaign. Selling with one mag- (extra mags available for £30)  £110
 
5 Tokyo Marui G19, tritium sights, crimson trace style laser grip, 2 mags with plus 2 style extended base plates. All gas tight
 
holsters available for all including WAS universal (£32 if bought with a gun) 
 
I have also  and hi Cappa retention  glock safariland style 
 
postage and PayPal fees are not included in the price 
 
you may want to check my sales reputation and consider paying friends and family to avoid the fees 
 
postage can be discussed once a sale is complete - I will only post using Royal Mail group fully tracked and insured (subject to their limits) 
 
gas magazines will be vented with the release valve sealed open to comply with postage restrictions 
 
all gas magazines offered are gas tight at time Sale and packing- but be aware cold shipping conditions can affect empty mags- buyers in any case should be familiar with gas mag maintenance- which I can help With advice if required 
 
PM me for more pic, video, details etc as I can’t add any more pics to the listing 

Listed here as I am fed up having them removed by eBay after bidders report them 
 
this is new, unused in original retail packing - it has been tested but not thrown
 
bidding has been on the at £57.75 plus £3.59 postage twice now before being taken down by eBay for breaching their imitation firearms policy which makes no mention of grenades 
 
first offer of £60 plus postage and I will cover the fees  buys this 
 
cheaper than any retailer 

If you fancy something a little bit different on a budget, this is the RIF for you
 
from the manufacturers blurb……saves me making it all up. See below….
 
The rifle will be sold in original box, with 3 mags and the suppressor shown. The original flash hider is also there. It shoots really well, cymaks built quality in recent years, especially in the AK platforms has been pretty good. I’m only selling as I have a few too many RIFS, that don’t get used.
 
The bad bits…. Not really a bad bit to be honest.
 
the outer barrel was shortened, quite crudely, however this has no effect on the acutely operation of the gun, and is really not noticeable - 5 minutes with the correct dye, would re thread the end of the remaining outer and it could be restored to the correct length with a cheap barrel extension. - the suppressor holds fine on the threading that has been done..   any questi9ns just ask, this is a typical Cyma ak that shoots well, decent range and accuracy with plenty batter space - ITS JUST THAT LITTLE BIT DIFFERENT! 
 
price £175 Ono, including postage, (plus PayPal fees)  will consider a swap for a good tactical AK, 
 
postage will be parcel force 48 
 
I am also happy to consider using this as part payment towards a TM recoil AK 
 
PLEASE NOTE : I will only arrange a postal swap with someone who has positive and recent sales feedback in this group, or who is vouched for by a longstanding member of this group with recent positive sales feedback 
 
 
CYMA BLURB….

The AK Alfa is an Israeli-American assault rifle manufactured by Kalashnikov USA and chambered in 7.62x39mm. The AK Alfa was originally based on civilian Saiga models and fitted with external parts produced by CAA. Following the American embargo on Russian weapons, this rifle is now produced on the basis of AKs manufactured in the USA by Kalashnikov USA.
 
Manufactured by Cyma, the CM.103A features an external : 
.
Robust, thanks to its 16" aluminum outer barrel.
Modular thanks to upper, lower and side Picatinny rails.
Ambidextrous thanks to its firing selector and catch magazine accessible from both sides.
Adaptable to all morphologies thanks to its retractable and folding stock and adjustable cheek rest.
 
And an internal : 
 
Special gearbox with QD spring guide for easy spring changing.
Reinforced internals with steel-toothed piston and steel gears.
Improved cycle smoothness thanks to 8mm Bearings.
Enhanced trigger response thanks to Hi-Torque motor.
 
In short, the CM.103A is an ideal choice for players who want a uniquely styled replica based on the AK-type platform.
 
 

For sale, is a Real Sword Type 97,  not a lot of these left 
 
this is stock, plus a basic mosfet to protect the wiring which has been extended to facilitate the Mosfet and battery fitment.
 
the type 97 shoots 330 fps, and is just plain reliable and decent. 
 
I won’t bore you with all the story of Real Sword particularly the type 97, if you are looking you have an idea, if not you will enjoy googling the research, real steel parts, and 1:1 scale 
 
this comes with 4  genuine Real sword m4 midcaps  - impossible to come by now. 
 
I bought this on a whim recently, but bullpups are not for me, which is a shame as the gun is superb.  Original box and all the little bits that make Rs special are included
 
price including the mags and postage is £550 …I will consider offers,. As I’m really not sure about how to value this, just compared it to recent sales I’ve seen  - I’m told they are rare and could be making £600 plus 
 
 
 
 

This is described on many websites/forums and in reviews as the best JPC replica on the market, although I’m sure some others may disagree.
 
I have owned several JPC’s including a genuine Crye and it’s certainly the best “replica”, in my opinion it’s much better made than the popular TMC, and every bit as good as any of the warrior kit I’ve owned.
 
I’ve just stripped the pouches from this to downsize my collection of rigs and plate carriers.
 
it is in excellent condition, no rips or tears and the Velcro is still very strong and not worn and frayed.
 
the JPC has an built in admin pouch at the top which has elastic that holds 3 pistol mags, and a built in triple m4/AK pouch 
 
the cummerbund is the largest size with 9 columns of molle, I am 6’4 19/20st and this fitted me fine with a front and rear drop pouch to add a bit of protective length for airsoft.
 
£85 including postage ONO  
 
 
 

Rail replaced, hand stop, cocking handle upgrade, (optic is not included)  5 Tan PTW EPM Mags, wired to deans, hardly used- compatible with systema variable fps cylinders - split gearbox mosfet with low voltage detection- stop firing on empty - extended barrel into suppressor. 
 
will come with the variable power inserts for the recently fully serviced cylinder which will change the power from anything between 310-370 fps 
 
Great bit of kit but have to thin out- rarely available with so many mags 
 
price includes parcel
Force 48 delivery to any UK Address

Rail replaced, hand stop, cocking handle upgrade, (optic is not included)  5 Tan PTW EPM Mags, wired to deans, hardly used- compatible with systema variable fps cylinders - split gearbox mosfet with low voltage detection- stop firing on empty - extended barrel into suppressor. 
 
will come with the variable power inserts for the recently fully serviced cylinder which will change the power from anything between 310-370 fps 
 
Great bit of kit but have to thin out- rarely available with so many mags 
 
price includes parcel
Force 48 delivery to any UK Address

For sale only
 
full metal slide, full correct trades and works as it should Glock17  Gas Blow Back Airsoft replica
 
I bought this as not working, however the only problem was that the mag was not compatible.
 
This will come with a fully functional gas tight Tokyo Marui mag which cycles and feeds as expected.  I added this mag  and binned the incompatible broken c02 mag.
 
This runs well on WE co2 mags and Marui/We green gas mags. It’s one of the best looking trademarked G17s I’ve owned and fits perfectly in a real G17 holster so I assume it’s a genuine 1:1 licensed  product- although I can’t confirm the manufacturer, I suspect all the evidence points to VFC or Army Armament 
 
£100 all in or offers in that region
 
Genuine browning  padded pistol case included free of charge