Ronin0033

SOCOM Gear “The Hitman” (Leon) Beretta 92F. 
 
Only used for display and very occasional plinking. Lovely pistol, full metal, correct trades on the compensator, and “The Hitman” and “No Women, No Kids” engraved on the slide. Shoots perfectly, no issues. 
 
Also comes with a set of Guarder Beretta grips, plus originals. The Guarder ones are a little thinner than the originals so the screws are a tiny bit loose, these could be shimmed out but it’s not bothered me. 
 
Comes with x2 mags, original and silver(original has slight leak from fill, will hold gas for a week though). 
 
£115 posted 

Up for reluctant sale my S&W Shorty .40 Sidekick. Would happily keep as a collectors piece, but other builds need paying for. 
 
Absolutely gorgeous little thing, functions perfectly with a leak free magazine. 
Very slight rub marks on the slide, but camera doesn’t pick them up. 
Has only been used with low power gas, which I would strongly advise the new owner to do too! 
Boxed with original instructions. 
 
£105 posted

Marushin M1 Garand 8mm Magazine Clips x10
 
Super rare, sold-out-everywhere rocking horse poop Marushin magazines. 
 
6 are plastic version (4 sealed, 2 open), 4 are metal version (all sealed). 

These would retail at around £10-15 each, I am after £70 o.n.o for them all posted. 
 
Payment via PayPal. Only swaps I am after are MWS parts/mags. 

Very nice custom Hi Capa, shoots perfectly and some nice parts to make this very unique. 
Comes with a very rare Nineball Full Length frame, I’ve never seen another apart from in Nineball promo photos, I don’t know if it was ever on general release? 
The frame has been sanded and polished as the paint was flaking off, it complements the build nicely though. 
 
Parts list; anything not listed below will be Tokyo Marui parts.
 
Airsoft Masterpiece Infinity Slide
Nineball Grip
Nineball full length frame 
Nineball Non Dropping Outer barrel (rainbow)
Nineball hop rubber
Nineball Steel Inner Barrel (unknown bore)
Airsoft Masterpiece steel sear
Airsoft Masterpiece steel valve knocker & spring
WiiTech Steel Knocker & Spring
Cowcow Steel Hammer (rainbow)
Cowcow Aluminium Trigger
KF CNC Blowback Unit (red)
Edge enhanced nozzle
Waldo 150% nozzle spring
LA Capa Duralumin Guide Rod (rainbow)
AIP Guide Plug (yellow)
Element Aluminium Oversized slide release 
 
Comes with 1 TTI mag, I believe it is EMG. 
 
£350 posted or collection from Swindon. 
 

RWA Agency Arms EXA pistol. 
 
Currently boneyard. Nozzle seems to jam on hammer assembly occasionally, locking the slide at half cocked. I’ve stripped, cleaned and checked for anything broken, but there is nothing obvious. 
I don’t really enjoy working on the Glock platform, so this can go to someone who does! 
 
These are great pistols when working, I have the Ronin version of this and it’s real nice.
 
No box, but comes with the EXA mag and a Tokyo Marui mag, both gas tight.
 
£70 posted 

Reluctant sale of this custom Kimber 1911. 
 
Based around a Nova Aluminium Slide and Frame, with a mix of Tokyo Marui and Airsoft Surgeon internals. 
I brought it a few months back as boneyard and 90% complete. 
Now complete and fires like a dream, even with the suppressor. 
 
Parts List:
Nova Aluminium Kimber Gold Match Ten II Slide
Nova aluminium Kimber frame
Nineball Aluminium threaded outer barrel
Airsoft Surgeon lightweight BBU
Nova Steel MSH, Safety, Beavertail and hammer (these have all been stripped and chemically blued)
King Arms AAC .45 Suppressor 
Tokyo Marui mag
 
Everything else is either Tokyo Marui or Airsoft Surgeon.
 
£180 posted 
 
 

Tokyo Marui 4.3 Hi Capa with a few upgrade parts. 
 
Standard TM internals and frame, with the following upgrades fitted:
 
Airsoft Masterpiece DVC Carry Aluminium slide
AIP 4.3 Fibre Optic Sights 
AIP 4.3 Aluminium guide rod (purple)
AIP 4.3 Aluminium Guide Plug (purple)
AIP Grip Screws (purple)
ZCI 6.02 95.7mm Steel Barrel 
Maple Leaf 60degree hop rubber 
CowCow Grip with stippling 
Bomber STI Magwell
 
The slide has been painted black for some reason, and is flaking off, perfect candidate for Cerekote IMO. 
Also the previous owner decided to make holes in the grip for the screws, so the lower 2 stick out more than usual. 
 
Shoots perfectly, has just been deep cleaned and lubricated. 
No box, but comes with 2 mags. 
 
£150 posted 

Reluctant sale of this custom Kimber 1911. 
 
Based around a Nova Aluminium Slide and Frame, with a mix of Tokyo Marui and Airsoft Surgeon internals. 
I brought it a few months back as boneyard and 90% complete. 
Now complete and fires like a dream, even with the suppressor. 
 
Parts List:
Nova Aluminium Kimber Gold Match Ten II Slide
Nova aluminium Kimber frame
Nineball Aluminium threaded outer barrel
Airsoft Surgeon lightweight BBU
Nova Steel MSH, Safety, Beavertail and hammer (these have all been stripped and chemically blued)
King Arms AAC .45 Suppressor 
Tokyo Marui mag
 
Everything else is either Tokyo Marui or Airsoft Surgeon.
 
£180 posted 
 
 

Reluctant sale of this custom Kimber 1911. 
 
Based around a Nova Aluminium Slide and Frame, with a mix of Tokyo Marui and Airsoft Surgeon internals. 
I brought it a few months back as boneyard and 90% complete. 
Now complete and fires like a dream, even with the suppressor. 
 
Parts List:
Nova Aluminium Kimber Gold Match Ten II Slide
Nova aluminium Kimber frame
Nineball Aluminium threaded outer barrel
Airsoft Surgeon lightweight BBU
Nova Steel MSH, Safety, Beavertail and hammer (these have all been stripped and chemically blued)
King Arms AAC .45 Suppressor 
Tokyo Marui mag
 
Everything else is either Tokyo Marui or Airsoft Surgeon.
 
£180 posted 
 
 

Custom ground-up built Hi Capa 5.1. 
 
No stock parts at all, a lot of time and effort has gone into making this work perfectly. 
It originally came to me not working, but all issues have been sorted, and upgraded parts fitted. Everything that should be metal is either Steel, Aluminium or Brass, no more zinc! 
 
It is not perfect externally, it does have a few marks here and there as it was skirmished by previous owner, but that just means it’s ready to be used again! 
Firing at 320fps. 
 
Parts list:
Lower:
Airsoft Masterpiece (AM) Aluminium Grip with AM parts (magwell, main spring housing, mag release)
Guarder aluminium Frame
Cowcow aluminium trigger 
Steel trigger bar
AM Steel Beavertail Safety
KF Steel Ambi Safety
KF Steel Slide Stop
AM Steel Grip Screws
AM Steel Hammer
AM Steel Hammer Strut
AM Steel Main Sear
AM Steel Valve Knocker
LaCapa Steel Firing Pin
LaCapa Steel Disconnector “lightning” 
AM Leaf Spring
AIP Valve Knocker Spring 
 
Upper:
Guarder Aluminium Springfield Slide (Cerekote/Silver polished)
Steel Outer Barrel
AIP Front & Rear fibre sights 
AIP Steel sight screws
AM Steel Guide Rod
LaCapa Duralumin Guide Plug (rainbow) - can be changed to silver if needed
AIP Aluminium hammer pad 
AM Brass Hop Unit
Maple Leaf 70 Autobot Hop Rubber
Elite Steel 6.02 113mm Barrel 
Guarder Aluminium Lightweight BBU
Guarder Reinforced Nozzle
Waldo Customs Steel Nozzle Spring
 
The only mystery is what recoil and hammer springs are fitted, I went though a lot during testing and lost track of what’s in there! 
 
1 Tokyo Marui mag included that has a very nice Limcat aluminium base plate on. Can also come with more mags if needed. 
Will also come in a hard pistol case. 
 
£550 posted, or collected from Swindon. 

Custom ground-up built Hi Capa 5.1. 
 
No stock parts at all, a lot of time and effort has gone into making this work perfectly. 
It originally came to me not working, but all issues have been sorted, and upgraded parts fitted. Everything that should be metal is either Steel, Aluminium or Brass, no more zinc! 
 
It is not perfect externally, it does have a few marks here and there as it was skirmished by previous owner, but that just means it’s ready to be used again! 
Firing at 320fps. 
 
Parts list:
Lower:
Airsoft Masterpiece (AM) Aluminium Grip with AM parts (magwell, main spring housing, mag release)
Guarder aluminium Frame
Cowcow aluminium trigger 
Steel trigger bar
AM Steel Beavertail Safety
KF Steel Ambi Safety
KF Steel Slide Stop
AM Steel Grip Screws
AM Steel Hammer
AM Steel Hammer Strut
AM Steel Main Sear
AM Steel Valve Knocker
LaCapa Steel Firing Pin
LaCapa Steel Disconnector “lightning” 
AM Leaf Spring
AIP Valve Knocker Spring 
 
Upper:
Guarder Aluminium Springfield Slide (Cerekote/Silver polished)
Steel Outer Barrel
AIP Front & Rear fibre sights 
AIP Steel sight screws
AM Steel Guide Rod
LaCapa Duralumin Guide Plug (rainbow) - can be changed to silver if needed
AIP Aluminium hammer pad 
AM Brass Hop Unit
Maple Leaf 70 Autobot Hop Rubber
Elite Steel 6.02 113mm Barrel 
Guarder Aluminium Lightweight BBU
Guarder Reinforced Nozzle
Waldo Customs Steel Nozzle Spring
 
The only mystery is what recoil and hammer springs are fitted, I went though a lot during testing and lost track of what’s in there! 
 
1 Tokyo Marui mag included that has a very nice Limcat aluminium base plate on. Can also come with more mags if needed. 
Will also come in a hard pistol case. 
 
£550 posted, or collected from Swindon. 

Various green gas pistol magazines. 
All are gas tight unless described. 
All prices include postage 
 
KJW P226 (SiG) x 2 - £13 each posted
KJW P226 - missing valve & broken feed lip - free if you buy the others! 
KJW? P226 - £13
WE F228 - £13
Tokyo Marui Desert Eagle x1 - £17.50
WE? 1911 - £13 
KJW Kp-09 (CZ75) - £13
KSC G19 - £15 
WE Glock Shell (no valves/spring) - free with another purchase 
APS Glock (Brand New!) £17.50 
 
For compatibility please do your research, I don’t know if this will fit your specific pistol, Google is your friend 😉

Western Arms SV Infinity 5” Limited GBB. 
 
Came to me as part of a job lot. Was missing the guide rod and front sight. These have now been replaced with a DP Fibre optic front sight (glued in as not a direct fit for WA), and an Airsoft Masterpiece guide rod. 
Pistol and mags have been completely stripped, cleaned & serviced, and it fires flawlessly. 

Will come with x2 magazines, and in a Glock hard case (yeah, I know!). 
These are very rare nowadays, and this one is serial numbered on the frame. 
 
£120 posted and paypal’d 
Collection also available from Swindon

Western Arms SV Infinity 5” Limited GBB. 
 
Came to me as part of a job lot. Was missing the guide rod and front sight. These have now been replaced with a DP Fibre optic front sight (glued in as not a direct fit for WA), and an Airsoft Masterpiece guide rod. 
Pistol and mags have been completely stripped, cleaned & serviced, and it fires flawlessly. 

Will come with x2 magazines, and in a Glock hard case (yeah, I know!). 
These are very rare nowadays, and this one is serial numbered on the frame. 
 
£120 posted and paypal’d 
Collection also available from Swindon

Originally brought boneyard, now upgraded to better than new spec. Has the very desirable TNT Barrel set up, which can quite easily hop .40’s and is the best barrel set up available for MP9’s (with the price to match!). Has been upgraded with the WII TECH steel disconnector, 130% recoil spring, LPE Piston Head, and a BRAND NEW CQB bolt (fitted and fired 5 rounds to test). 
The only issue is previous owner has somehow mangled the grub screw that holds the barrel set together. Has no affect on operation, but currently stops you taking the TNT assembly apart. 
 
So package is:
KWA MP9 with x1 48rnd mag
TNT MP9 Barrel Set 
WII Tech Steel Disconnector 
WII Tech 130% Recoil Spring
Lees Precision Engineering Piston Head
New CQB Bolt Set
 
£230 posted, or collection from Swindon 
I can also include a second long magazine for an extra £30