-
Posts
162 -
Joined
-
Last visited
-
Feedback
100%
Reputation Activity
-
CRTHayes reacted to Roborob for an advert, Realsword SVD
Comrades! For sale is my beloved and rare collectors Realsword SVD as I’m now a dirty GBBR user. Only a few come up for sale each year as these got discontinued a long time ago. This one is number 850
Comes with:
-1x Realsword SVD
-1x Realsword mid cap.
-1x Modded cyma hi cap.
-5x Modded cyma mid caps.
-Long Rifle bag.
-Unknown brand PSO scope with missing latch (throwing this in for free).
-SVD cheek pad.
Currently chronos at 354 fps with hop set for .3G BBs.
Upgrades:
-Gate Pico MOSFET installed, wired to deans.
-SHS/rocket high torque.
-Maple leaf 70 degree rhop bucking.
-Maple leaf omega nub.
(I believe it has a maple leaf barrel as well.)
Things to note:
-Unsure if illumination on PSO scope is working. Also the latch has fallen off it so you need pliers to turn the nut to loosen it and slide it off the dovetail.
-Exterior is nicely worn for a lovely eastern bloc rugged look.
-BBs curving slightly to the right so just needs the bucking reseating.
-It’s a bit difficult sometimes to get the hand guard bracket off to access the battery compartment (you’ll need a screwdriver most likely to lever it). It’s very solid.
-Runs best on 11.1v lipos. Don’t spam the trigger super fast just in case the gearbox locks up however this has never happened to me.
-I can’t guarantee all the mags feed perfectly until the last bb but I’m 99% sure they do.
Price doesn’t include PayPal fees or shipping.
Thank you very much.
-
CRTHayes got a reaction from RunningLaser2 for an advert, Cyma platinum sr25
Looking to sell my Cyma sr25
Lovely gun, brought to hpa but never got round to it
4 hi caps
5 mid caps
200
postage included in price just need to pay PayPal fee
-
CRTHayes got a reaction from Tackle for an advert, Cyma platinum sr25
Looking to sell my Cyma sr25
Lovely gun, brought to hpa but never got round to it
4 hi caps
5 mid caps
200
postage included in price just need to pay PayPal fee
-
CRTHayes reacted to CompulsiveWarfare for an advert, Daytona L7 GPMG
Built on A&K base
Including the correct:
Sling
Top cover
Front sling mount
Flash hider
3d printed gas block
Gas reg
Charging handle
Carry handle
Jungle box mag
Oversized orings fitted (doubles air efficiency)
Laylax 6.03mm inner barrel
Also includes a belt of 7.62 aswell as spare hop rubbers, air line and orings
Daytona kit fitted and broken in, reached 70m maximum on Bristol Cribbs range (video link below)
Recommend >0.3g non-bio bb's
LOTS more pictures on request, open to offers and any questions
Buyer should be aware Daytona's are very involved and need maintenance
Collection Bristol, or can meet in middle, postage can be arranged but won't be cheap.
-
CRTHayes reacted to acrxil for an advert, Tokyo Marui Saiga 12K
This is a very fun gun and I am selling as I don't use it as much as I should, it is one of my favourite builds and has had a lot of time put into it. As is fairly obvious it comes with an airtac HPA adapter (the new gen plug and play version) which is awesome, I have had to replace the nozzle because of this and the best one I have experimented with is the Tapp airsoft CNC one, I do have a fair few spare parts so lmk if you are interested in any of these. It also has a Bavtac 115% recoil spring and a Federal Concepts bolt buffer to keep the ROF up but not fuck the bolt up. I fitted the C&C Tac Piston Head which made the gun a fair bit more efficient, and I have also installed some PDI 6.05 inner barrels.
Externally, I have fitted a 5KU PT-1 stock, 5KU RK3 grip, and 5KU PT-1 charging handle for the Zenitco look. It also has a C&C Tac dog leg dust cover, a hepheastus steel selector lever, the Wiitech short outer barrel and a 3D printed handguard with a Federal Concepts handstop fitted. The Eotech clone on top is included, lmk if you don't want it as I can always respray it for another gun XD
It does also come with the original 45rd saiga magazine but it leaks as I haven't had any reason to fix it
The price includes postage and paypal fees, if you have any questions or offers just lmk!
-
CRTHayes reacted to navyvet86 for an advert, VFC Glock 19 Gen5 MOS + SLR magazine gas extension (new)
*This listing may be removed early as I am currently debating
getting the steel MOS kit if I work something out on it.
Cheers
Absolutely no marks or blemishes
Genuine new build from brand new parts and base. Stored and safe
Shake Test: - https://streamable.com/qydnnd
Slide Release: - https://streamable.com/vdsfh9
VFC G19 Gen5
Aluminium matte finish MOS Slide kit
Crusader v2 nozzle
Glock box case
RMR adapter plate
RMR holosight V2 HD red dot
New and sealed SLR magazine gas+BB extension base
Built stored saved
Really nice piece , nice and real sounding to rack and clack
No light but optic included
Fast postage UK only
-
CRTHayes reacted to Cr0-Magnon for an advert, 100% Guarder Glock 17 Gen 3.
*Price lowered to the very least I am willing to take. Any messages with offers below this or requesting "best price!?" will be ignored*
I've recently scratch built this using 100% Guarder parts (so all steel internals too). Saying that I prefer my Guarder slides light, so it does work better on a stock TM recoil spring. I will include a TM and Guarder recoil spring, so you've got the option.
There's some scratching on the dummy ejector where I hammered it in (they can be a bastard sometimes), if this bothers you they can be bought for circa £10 online.
I will also include a Guarder Glock 17 Magazine, these are £65 alone on Firesupport and I believe that version doesn't include the Glock marked baseplate.
In fact if you bought the same kit from them, it would cost £519 + postage.
Build:
- 100% CNC Gen 3 Aluminium Slide.
(with US markings)
- Steel Outer Barrel.
- Guarder complete hop set and
inner barrel.
- Lightened BBU, reinforced nozzle
etc.
- Guarder front and rear sights.
- Gen 3 Lower with US markings.
- Full steel internals.
- Nylon Fibre trigger and mag
release.
As mentioned the slide is the most expensive 100% CNC version, not to be confused with the cheaper cast or cast with CNC polishing ones and you can really tell the difference.
The Glock case is not included, I used it purely to keep the gun and paper dry as it's been raining all day.
Stated price includes PayPal fees and tracked postage.
Please PM any questions, as I don't get notifications for anything added to the listing.
-
CRTHayes reacted to Cr0-Magnon for an advert, Unskirmished Aplus/KJW G23C
Picked up a couple of these recently as the OD Guarder frames are getting harder to come by and it's such an amazing colour (the camera doesn't do it justice).
The base gun itself is the very capable KJW Glock 23C, with a metal slide. The slide is adorned with deep laser engraved Glock markings, which are of course complimented by the Guarder frame.
As per the title this hasn't been skirmished but Glocks rub the outer barrel from pretty much the first shot. Also some paint has come off the body pins from where they've been pushed in during fitting of the new frame. Other than that it's pretty much as new.
Will come with one mag and in it's original box. Stated price includes PayPal fees and tracked courier.
-
CRTHayes reacted to jaegerino for an advert, Tippmann ‘M16’ *read description*
Afternoon,
Bought this from another seller here in the hopes of getting into HPA but I’m not gonna get around to it; the external assembly of the gun to make it into an ‘M16’ was misleading, there’s wobble and jank to it.
The RIF fires and functions as it’s meant to, but the front handguard has no gas tube to align the grip and no barrel nut to keep the barrel locked in place so there’s twist in it. Stock is absolutely rock solid but the butt pad needs love. The carry handle needs attention as well.
One really cool thing is the handguard and stock are REAL M16 parts, and everything else feels snappy just like a Tippmann should
I would like to see this in the hands of someone who knows Tippmann’s and will do it justice… or use it for parts.
Comes with 3 mags, looking for £250 inc postage, will consider trades.
Any questions please ask I will do my best
p.s. previous previous owner informed me it’s a V2
-
CRTHayes reacted to BenJackson for an advert, Boxed MGC Calico with super rare optic
On the way to me from the land of the rising sun, this MGC Calico with extremely rare optional MGC optic. Comes complete with the box, sling and accessories. These are one of the most reliable classics you can buy, I've never had one in with a problem. Simple gas in grip design, NBB and hundreds of shots before you need to regas. Utilises a very simple hopper system with capacity for 900bbs, just poured in the top of the gun.
Since this is still in transit, I'm happy to hold it for the buyer and wait for payment until its arrived, or payment can be arranged upfront. I run Raresoft and do this thing all the time, so happy to prove my credentials, you're in safe hands.
£285 to your door.
-
CRTHayes got a reaction from RMDavis for an advert, H&K Umarex g3a3 gbb rifle
Reluctant sale of my beloved g3a3, brought as wall hanger and has never been skirmished
Comes with 3 leak free barely used mags these are not cheap
real steel scope mount also not cheap
looking to fund another project, serious offers welcome in trades for a lmg/ support gunner weapon
contact me for any more information 07843063343
-
CRTHayes got a reaction from L3wisD for an advert, Tokyo Marui Albert wesker
very nice collectors piece from the game and film series, resident evil
unskirmished and still had shop tags
reluctant sale of collectors piece