BIGwat
-
Posts
88 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by BIGwat
-
I'll definitely check both of those out, I want as learn as possible, I know in your video you mentioned the cardboard tops for the hull are 18mm. I'm struggling to find any hole punch's that are 18mm, but there are a few that are 19mm would that still be adequate for the job? with it only being a small fraction larger
-
Thankyou so much Enid, im a complete noob with the aps shells and this was super helpful! Very much appreciated, many thanks.
-
Hi all, I have currently started a hawsan double barrel project, it is the full length version. I have ordered the conversion kit from blobworks to have this use aps shells, I know it can only use aps mk1 and mk3 smart shells but my real question is does anyone have any experience with the xpower shells? They seem to be much easier to get hold of but I'm unsure due to the power increase in fps, are these still field legal? Thanks BIG
-
This advert is COMPLETED!
- For sale
- Used
Hi all up for sale is my fully upgraded l96. everything is fairly new, only skirmished it once which was straight out of the box, threw a load of money at it just to not use it, which for any of you who knows me on here knows I'm notorious for blowing money and selling up a week or 2 after. It is upgraded with and comes with the following AA cylinder AA hybrid piston Guarder spring guide Airsoft pro trigger unit AA hop unit Maple leaf macaron 70 degree Maple leaf omega nub 509mm madbull 6.03 tightbore Barrel spacers Scope 3 mags 1 AA mag (doesn't fit) Couple of extra springs I do have some of the stock old parts aswell if need be. The thread on one of the screws from the trigger unit to the body was just spinning making the unit a little wobbly but I have now fixed it so it's no longer an issue just thought it was worth mentioning, it is currently firing a tad bit hot so will need a little bit of tweaking also as seen on the pictures the inner barrel is a tad bit too long and pokes out of the end but a thread adapter and muzzle should clear this right up. I do have the original end cap but will need to be bored out a bit for the end of the inner barrel to pass through. I have no idea on performance as I've not skirmished it since its been upgraded as mentioned above This all together cost around the £400 mark give or take, just want to make something back so I'm Asking for a very reasonable price of £150 + postage or collected Thanks for looking BIG£150
Mansfield
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
After a Winchester, also interested in other historical rifles from mid to late 1800'sNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
Hi all had this up for sale a little while back but withdrew it from sale as I decided to put a bit more time into it, it is now back up for sale with a few extra bita, not really much to say about it, just an extremely good bit of kit. Genuine reason for sale, I love the sniper role, but I love cqb so much more Comes with .2 mags .Esslbn 4x8 scope .Stock sleeve with refurbished 308 win rounds(not live) .real steyr scout sling mounts .full bottle of .48g bbs .Upgraded with a modify xrange bucking and modify t nub (hard installed, soft still in packaging) £350 + postage or collection£350
-
This advert is COMPLETED!
- For sale
- Used
As above, a pretty rare model of little bird, has all the highest spec you can pick when they released from the factory including full auto and stealth vented slide. Has had a fair amount of use so it does have usual worn marks Comes with original box and manual 3 mags( 1 missing base plate) and Several different colours and sizes of grip covers Has had a new loading nozzle fitted 3 days prior to this ad and a grease. Every now and then though it does misfeed, I dont know if that's due to whether the loading nozzle needs bedding in or not as I do not know. £50+ postage fee or collection Thanks for looking. BIG£50
-
This is all brilliant thanks guys
-
hi all i own a WE m&p little bird, while firing the loading nozzle completely sheered itself in half, I've ordered a new oem part, I'm expecting it to happen again later down the line but ideally want a reinforced loading nozzle. i have noticed there are a lot of upgraded parts for the TM but hardly anything for the WE, I've read that the older WE pistols were a direct clone of TM, my little bird is a fairly old and pretty sure discontinued model. before i order anything and possibly waste my money to find out whether its compatible or not some insight from someone who knows would be very much appreciated. thank you for taking the time to read this. BIG.
-
This advert is COMPLETED!
- For sale
- Used
Absolutely excellent piece of kit and by far the best sniper rifle I have used can hit a target pretty easily at 100m with 0.46, its extremely accurate and the bolt pull is as smooth as silk. its firing perfectly and bang on the money with both fps and joules They are real rounds on the stock but dont worry they are not live they've been fired and refurbished with a new brass head, but definitely adds a new level phwarrr to the aesthetics Comes with a nice big scope, maybe a bit too big for some people..that's what she said *cough* but I like it. if its not to your taste the sun shade easily screws off. Also comes with "REALSTEEL!!!" sling mounts which work amazingly well and are very sturdy along with 1 mag and a stock pouch Very well looked after, only selling as I dont really play anywhere to use it's full potential 300 + postage Thanks for looking! Take care BIG£300
-
This advert is COMPLETED!
- Swap only
- Used
Absolutely excellent piece of kit and by far the best sniper rifle I have used can hit a target pretty easily at 100m with 0.48s, and its extremely accurate and the bolt pull is as smooth as silk. its firing perfectly and bang on the money with both fps and joules They are real rounds on the stock but dont worry they are not live they've been fired and refurbished with a new brass head, but definitely adds a new level phwarrr to the aesthetics Comes with a nice big scope, maybe a bit too big for some people..that's what she said *cough* but I like it. if its not to your taste the sun shade easily screws off. Also comes with "REALSTEEL!!!" sling mounts which work amazingly well and are very sturdy. Also comes with 1 mag and a stock pouch Very well looked after as this is the Robin to my batman, but I dont really play anywhere to use it's full potential I'm wanting a swap for a LCT ideally a VSS or a WE dragunov. something russian and tasty Thanks for looking! Take care BIG£345
-
This advert is COMPLETED!
- For sale
- As new
Cyma sr47 for sale. this gun is literally 1 week old from new. I bought this on a wim. but it's not my cuppa tea The gun is full metal apart from your usual m4 polymer parts (stock and pistol grip) The gun fires perfectly with a very nice rof, I've not had it chronoed yet so I have no idea on its fps/joules It's not all sunshine and rainbows though, as when I bought this it arrived with a hair line crack just below the ejection port and a crumpled/bent mock bolt cover which I had to take out before it fell out. This does not effect the gun in anyway at all, the body is extremely solid and well built. I've included a new metal upper receiver but will need some modification to fit and also included a shark styled mlok rail system which was intended for this gun, both the body and rail system are brand new also. infact the body only arrived today The gun cost me £220, £50 for the body and another £60 for the rail system. All in all its cost me £330 (TRACER UNIT NOT INCLUDED) Im wanting £120 +postage Thanks for looking BIG.£120
-
This advert is COMPLETED!
- For sale
- Used
tokyo Marui hi capa for sale, does have some wear on the slide due to being holstered. Comes with 4x mags and a holster, I haven't used this in some time now so have no idea if all the mags are gas tight I know one or two of them was leaking slightly the last time I used it but seals do perish over time. I have no use for it as I barely use pistols or gbb these days. £70 + postage and paypal Thanks for looking BIG.£70
-
You sir are a legend!! Thankyou!
-
Ahhh damn shame! no problem buddy I appreciate the feedback/info, it's so hard to find replacement bodies these days even on m4's the only ones I could find new are ics or the wrong gen upper receiver, which the upper is all I need. everything is out of stock or costs a an absolute fortune which I'm assuming that's why theyre still in stock
-
Hi all was wondering if anyone knew if an ics m4 reciever would fit on another brand of m4, specifically a cyma? Thanks BIG
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- As new
wanting an m4 upper receiver to replace my current one on my cyma, not fussy about branding as long as its compatiable. ideally a metal one thanks BIG£1,234
-
This advert is COMPLETED!
- Swap only
- Used
Awesome gun with an extremely satisfying ebb. It was imported around 6 month ago, definitely something you dont see every day as these are getting exceptionally hard to find these days, intentions of fully upgrading this into a one of a kind, but I'm interested to see what I get offered for this first. Cons Only very minor but it's worth mentioning. .The gun got to me without the qd mounts on the rear so I have replaced the slots with 2 perfectly fitted rubber grommets to allow a paracord sling to be pulled through without wear on the stock. .A small nut on the rear of the stock was missing aswell, which I've placed a scope ring nut on just for the time being, a replacement nut can be bought from any hardware store for loose change. Don't have a preference really in mind, just nothing silly. So...fire away! BIG.£1,234
-
This advert is COMPLETED!
- For sale
- Used
Full metal co2 revolver, won this in a raffle a while back, never been used apart from plinking on the back garden £50 posted Will consider swaps on We glock mags, m4 mid caps or a nice holographic, sights, grips etc Thanks for looking£50
-
This advert is COMPLETED!
- For sale
- Used
Make: asg Gun/Model: scorpion evo carbine 2020 Accessories: listed below Condition: good FPS: 300 Splits/Swaps/Part Exchange: n/n/n Price/Payment: £230 +p&p Pictures: Evo carbine 2020 revision Airtech stock stabilizer Airtech hop wheel Airtech charging handle lock 7x 75rnd midcaps Ares octa grip/hand stop Madbull python 6.03 Milspec m95 spring Ultimate spring guide with bearings Soldered to Dean's (4x not included) Could use a new bucking/nub. Airseal isn't the best in the bucking as it sits quite loosely. £230+postage and paypal fees if chosen payment method. Thanks for looking. BIG.£230
-
This advert is COMPLETED!
- For sale
- Used
Cracking little pistol selling due to not using often enough, all mags are gas tight. Pretty rare I do believe to find one of these with the WET design and with full auto Wanting £130 + postage£130
-
This advert is COMPLETED!
- Swap only
- Used
Hi all just looking to see what i could get offered for my Aug, comes with what you see in the pictures. ive always had Aug's so i thought it was time for a change, this is an ex twotone rifle, not seen action due to covid 19 apart from plinking in the garden. Im not particular with guns so show me what you've got, just no pistols or snipers.£200
- GB
