glockkidd

Selling my custom built Glock 19. 

It has a TM Gen 3 base with a Guns modify rmr cut slide, upgraded springs to make it work well, upgraded BBU/Nozzle. It also has a maple leaf inner barrel and a flamingo rubber. It runs nicely and would make a very usable sidearm, it's been mainly on display since it was built. Package includes 2x mags. No other items are included. Looking for £195. 

Shout if you have any questions. 
 
 
 
 

Looking to sell my custom TTI Glock 26. It comes with a guns modify slide, custom trigger and a stippled frame with appropriate undercut. It's pretty much an exact replica of the pistol famously used as a backup in John wick 2. 

I made it myself during lockdown and the parts themselves are worth £200 before the base cost of the TM glock (approx £125 at the time). 

I am looking for £195 collected from west sussex or I can post for an extra £7

Thanks for looking! 

 

Vfc Scar h ssr
Set up as dmr
Comes as seen .lovely looking rif, is sprayed and worn down look
Gearbox has been swapped to quick change version
16.1 bearing gears
New piston and head
T238 trigger mosfet set to single only
Specna arms dark matter 27k brushless motor
6.02 410mm barrel with 4autum hop rubber and nub
Comes with ufg  4- 32scope on one piece mount
Wadsn style flashlight and pew box ( Lazer light ) wit dual switch
Harris style bi pod
4 g+g p mags
Shoots 445 fps and set up for .4bbs
Comes in padded case

Up for sale is a vfc lapd kimber with vfc tac light and holster that fits both the gun and light . Also 2 extra mags all gas tight 

Ugly little M4, in very good condition, this PDW is fitted with a Leviathan mosfet, the latest model that you can set via Bluetooth and has a special made trigger feeling on the trigger pull (it costs about 115£).
 
The M4 rifle only costs £260 in shops, it has been used only in the garden then the stock locking button snapped. Now has fitted a new one made from brass. 
Comes with a midcap mag.
Price does not include the battery or the red dot (add £25 if you want the red dot)

For sale is my G17 Gen 4 GBB. 
 
I’ve only put around 30 mags through it for back garden plinking, never skirmished. 
 
Has a couple of very minor scratches which are only cosmetic. It’s in perfect working condition and as you can see the internals are in new condition. I’ve just lubricated all of the moving parts internally. Really is a snappy pistol. 
 
Comes with a gas tight mag. 
 
it’s not shown but the original Umarex box is included in sale and is in perfect condition. 
 
I’m selling to fund a GHK Glock. 
 
any questions pls ask. 
 
asking £140 shipped. 

I WILL INCLUDE THE TAN GLOCK CASE IN SALE. 
THE BLACK GLOCK HARD CASE AND TORCH ARE NOT INCLUDED.  
 
Thanks for looking. 
 
 

Tokyo Mauri MWS
 
Repro SLK stock 
Magpul K2
Repro magpul trigger guard for mws
Maddog HRF Maxwell
PTS radian Charging handle
G&P Sling plate
Guns Modify GEI style adjustable trigger
Holy Warrior Razor
Repro Emissary development hand stop
Wadsn Torch 
Maddog MK18 Rail 
3d Printed Hurx suppressor
GM Steel bolt release
Jaeger Precision Zet Plate 
Jaeger Precision NPAS
Jaeger Precision Nozzle Spring
Jaeger Precision Titan
Flamingo 60
Angry Gun buffer spring
Mad dog Magpul dust cover
Jaeger Precision MWS easy loader
5 Leak Free Mags
 

GHK Glock 17 Gen 3 with steel slide and barrel price £260 posted
- 1 extra mag  leak free + £35
- Improved trigger extra (to install it yourself, learning how your pistol works) 🙂 £15
 
The pistol has a custom stippled grip, slim grip and finger cut. It has never been out in a game, only target practice. All stock internals. The paint is a bit faded away due to a magnet holder system from the previous owner(top part of the slide, have a good look if you are a perfectionist) 
All package for £295 posted from W London

Up for sale is my EMG Steccato P. I’ve put around 5 mags through it but selling as new as it is literally in new condition.
 
Included (in brackets is what I payed):
- Pistol (£120)
- 1 gas tight mag with flared mag well. 
- Zoptek elite RMR Red dot sight. (£65).
- SF X300V rep light with strobe function. (£75). 
- barrel thread adapter for a suppressor (£15). 
- the orginal EMG box is included and it’s it mint condition (not shown in photos, heading home on the weekend and will grab it then). 
 
 
As it’s new everything on it works as normal. 
 
I'm selling as i just dont use it and cant justify it sitting on my shelf for any longer  
 
its a sweet pistol tbf and feels solid. Packs a punch when it fires!! 
 
Cost me £275, asking £210 posted. Will do my best to send out the same day. 
 
Any questions pls ask. Happy to send pics and vids of it. 
 
Thanks for looking!! 

Toast To Freedom T-shirt Grunt Style Print Liberty Medium. 

THESE ARE A LIMITED RUN! SHOW OFF LADY LIBERTY HOLDING A BEER! PERFECT SUMMER TSHIRT! 

Selling as I bought two by mistake and it will cost too much to return to 🇺🇸. 

It cost me £25 plus £23 shipping and a long delivery time (around 3 weeks). 

I’m asking £25 plus £3.50 shipping (2 working day delivery). 

PLEASE NOTE THAT THE UNOPENED TSHIRT IN THE PHOTO IS NOT THE ONE YOU WILL RECEIVE. YOU’ll RECEIVE THE UNOPENED ONE IN THE PHOTO WITH ORIGINAL PACKAGING. 
Any questions pls ask!

The last of my RIF's. Was hoping to keep this as a sentimental piece, but of course the need for money takes priority.
 
To start, this has been fully assembled by myself, all parts were purchased brand new and the RIF itself is in unskirmished condition, with less than 1 mag through it for testing. Check the pictures for a view of the internals, the whole RIF is like brand new with not a scratch on it.
 
It fires nice and snappy on green gas with the steel slide locking back on empty with no issues at all.
 
I'm unsure of FPS, may be slightly high due to the tight bore, however the magazine valves are adjustable.
 
All serial numbers match, and the markings are the EU versions.
 
Full Guarder built Glock 19 gen 3, with replica Surefire X300U, 3x leak free magazines, carry case, manual and all original packaging for the parts and upgrades.
 
Build list - All Guarder parts unless otherwise specified -
 
Upper -
 
Steel slide and outer barrel set (EU markings),
Steel night sight set (glow in the dark),
Steel recoil rod and 150% spring, 
Lightweight nozzle housing,
Reinforced nozzle and valve,
Aluminium CNC hop unit,
PDI Steel 6.01mm inner barrel,
Maple Leaf Delta hop rubber.
 
Lower -
 
Pre-assembled frame set with FULL Steel internals (Hammer unit, trigger bar, knocker, sear, pins, levers, springs, the whole lot),
Steel extended slide release,
Genuine Magpul magwell (modified to fit),
A total of 3 gas tight Tokyo Marui magazines fitted with nineball routers and adjustable output valves, and finished with Guarder mag extensions.
Replica Surefire X300U in black.
 
Also included -
 
All packaging from parts and upgrades so you can see exactly what went into it,
Glock carry case,
Marui manual,
Speed loader and some .2 Marui BB's,
Spare hop rubbers.
 
This took a lot of time and cost in the region of £750 to put together, I'm hoping to get £520 including postage and PayPal.
 
Please feel free to check my feedback and am happy to answer any questions.

**Just listed for the weekend - will be removed Sunday - just a polite heads up to any interest**
 
T8 Staccato C2 (Tan)
 
This has been modified for smooth operation and speed.
Disconnector , sear , firing pin are all steel T8 ones and have been polished smooth along with the rails which have been polished smooth also. Full parts list is below. Short stroked recoil rod, heat treated and resprung etc.
This is a complete new build. Built, tuned, stored. Can come with original blowback if you prefer a heavier slide
 
Comes with staccato STI felt lined padded gun bag
 
 
 
AIP long flat trigger
Bomber metal matte powder magwell
Edge V2 titanium grey 12g blowback housing
Novri purple enhanced nozzle
Enhanced cylinder head (great air seal)
140% nozzle return spring
Silicone recoil buffer 
T8 dual point purple bucking
Guns modify steel thread adapter
X300-B high lumen weapon light
Surefire 1911 x300 switch (not installed)
HW HQ QR RMR red dot (good diode)
Staccato 2011 felt padded carry bag
 
https://streamable.com/hq9shs
 
Trigger pull is around 1-3mm and trigger reset is about 1-2mm
 
Any questions feel free to ask and thanks for looking 🙏 
 
 
48hr tracked signed recorded delivery £6.99
 
 

Emg tti glock,only bought(used) to go into my John wick case,only skirmished twice according to previous owner,not sure on fps on these as I’m only a collector not a player,price includes any fees and postage

Got an ACOG sight for sale, it’s one of the better ones made by Holy Warrior which includes full trades and a solid build, very close to the original version. 
 
Selling as I just don’t use it. Has a few storage marks and scratches but it it’s near new condition. 

These are around £180 online so I’m asking £140 posted. 

May be selling my TM M4 MWS GBB (in the photos) in the future so look out for that. 

For sale is my VFC G45 GBB. 
 
Owned this for around a year now but not used it much hence the reason for sale. 
 
Its first owner had it stippled and they did a mint job, feels great in the hands! 
 
Comes with 3 gas tight mags. 2 of them have SLR mag extensions (think these cost around £35 each brand new) which increases the amount of gas and BB’s held. 
 
Also comes with a working red dot RMR sight, an iron sight base plate and raised iron sights. 
 
*Torch and glock case are not included in sale. 
 
*There is a small chip in the slide which causes the slide release catch to not grab the slide when the mag is empty (occasionally happens). 
 
Open to reasonable offers. 
 
Asking £199 posted. 
 
Any questions pls ask. 
 
 

For sale only is my WE L119A1. I didn't build this, but it's brilliant. 
I don't want to sell, but this gets the least use out of my three GBBrs so I need to let it go. 
Below is the build information from the ad that bought it from:
 
ky custom lower with markings 
machined diemaco style buffer tube w/ hao lock ring
machine steel barrel to correct length (so you can cqb it ) w/ army code 6” extension with removable sleeve and realistic stamp
army code iron sight
g&p stock, knights style grip and rail covers
warlord tactical diemaco sling mount and stock pad
lower ris has locking mechanism similar to upper to use the r/s end cap
stowaway pistol grip (end cap lost, this happens on real grips too unfortunately)
sa80 sling and WE steel m4 birdcage fh
old acog ( bad sight picture but zeroed in)with red dot and dummy peq 2 will be thrown in 
has had a couple of receiver mods done ( see above charging handle)
Internally this has a white lfs disc resulting in an fps of around 280 with .25 using WE 2.0 gas
has full length Ra tech inner barrel and yellow maple leaf autobot hop rubber fitted. 
has also had the bolt release shimmed for reliable stop on empty. 
This was built for milsim and has only been fielded 2 times so internally it’s like new. Rustic paint job for coolness. 
 
Comes with the pictured accessories. I will box it up. And ship at buyers expense. 

Ares M45-X in good working condition. No damages or faults. Wired to Deans. 
Includes-
-7.4v lipo. 
-Flip up iron sights 
-Stubby handgrip.
- A rare handgrip/barrel extension. This improves the accuracy and range of the RIF. This alone cost me £85 and was a nightmare to source. 
- 1500 rnd drum magazine (RRP £50). 
- 2x mid cap mags. 
- 4 x low cap mags, 2 have Glock trades on the mag butts which is a nice feature. 
- Original metal flash hider. 
- Original box. 
FPS 270 approx, slightly higher with the longer barrel installed. 
The suppressor, Holo sight, torch and longer hand grip aren’t included in sale. 
The RIF on its own RRP’s for £380. I’m asking £225 plus £10 posted for everything mentioned. Selling as I’m buying a new Jag and need the pennies haha. Any questions pls PM me 🙂 Local collection welcome in Stafford, ST16. 

👋 
For sale, TM AUG High Cycle AEG in FDE/Tan.
 
In perfect working condition. I’m the second owner. I’m selling as I don’t use it anymore and only using my Glocks for garden plinkin. Shoots perfect and is accurate as hell. The ROF is insane!!! 
 
Included in sale:
 
-RIF
-6 Mid caps
- Holo sight (red, green, dimmable). 
- Surefire rep side torch. 
- Rep Magpul Tan iron sights. 
- 7.4V battery (recommended for this RIF). 
- MFT RSG Vertical Grip. 
- TM Spec Ops Pro Silencer, short. 
- Mag pulls on all of the mags. 
The grip has been modded to accommodate allow custom hand grips. 
 
Asking £299 posted. 
 
More than happy to provide videos of it firing, and any other info or pics. 
 
*no offers on the dog please, he’s currently not for sale 🤣
🤟

👋 
For sale, TM AUG High Cycle AEG in FDE/Tan.
 
In perfect working condition. I’m the second owner. I’m selling as I don’t use it anymore and only using my Glocks for garden plinkin. Shoots perfect and is accurate as hell. The ROF is insane!!! 
 
Included in sale:
 
-RIF
-6 Mid caps
- Holo sight (red, green, dimmable). 
- Surefire rep side torch. 
- Rep Magpul Tan iron sights. 
- 7.4V battery (recommended for this RIF). 
- MFT RSG Vertical Grip. 
- TM Spec Ops Pro Silencer, short. 
- Mag pulls on all of the mags. 
The grip has been modded to accommodate allow custom hand grips. 
 
Asking £299 posted. 
 
More than happy to provide videos of it firing, and any other info or pics. 
 
*no offers on the dog please, he’s currently not for sale 🤣
🤟

Due to lack of use I'm selling my TM Recoil/L119a1.  
 
Upgrades include:
Prometheus piston head
Prometheus spring guide
Prometheus cylinder head
Prometheus air nozzle
Prometheus cylinder type A
Eagle6 M100 spring
TM RAS set
Laylax metal lower receiver - blank version that was then custom engraved
BTC Spectre (not bluetooth)
 
Also includes the ACOG with wing mount, genuine Surefire Scout, 9 mags and 5 batteries that fit in the PEQ.
 
Issues I'm aware of are the mag stop on empty isn't working and the front end needs tightening, has a bit of a wobble.  My technical expertise ends after filling the mag and changing the battery so I've not attempted to resolve either issue.
 
The Spectre is currently set to single and 3 round burst and overall it's a lovely bit of kit with great range.
 
I'm based in Bishops Stortford (CM23) and happy to deliver or meet as long as it's not too far.
 
Happy to answer any questions.
 
Thanks
Rob

DESERT CAMO DAYSACK NOW SOLD!
BUT
WOODLAND GREEN DAYSACK STILL AVAILABLE!! 
 
slightly Used but in great condition. Used for a military exercise. 
 
nothing missing. All zips and toggles intact and working. 
 
Standard DPM camo. 
 
asking £20 posted. 
 
any questions please ask! 

Hello,
 
Selling my 2018 Scorpion Evo with various external configuration options listed below:
 
Ripper Tactical 3D Printed Short barrel and handguard (currently fitted)
Ripper Tactical 3D Printed Retractable stock (Currently Fitted)
3D Printed handguard and rectangle suppressor, has the original external barrel fitted to the handguard. 
Original handguard
Buffer tube adapter (Requires Buffer)
Magpul Moe Stock
5x Mid Caps with 3D printed Magazine Pull tabs
3D printed Odin Magazine Adapter
 
Internals i have only changed the inner barrel from the stock to a Madbull 6.03mm tightbore MP5K size. 
 
Selling due to no longer playing airsoft, i have no time for it anymore. 
 
£270 all in posted via PF48. 
 
No Swaps 
No Stupid Offers........

Righty, where do I begin!? Bit Reluctant to sell this as it took me a while of time an effort to put it together. But I rarely get to use it and I'm saving for a Viper Tech GBBR version to basically do the same thing with.
 
So it started life as an TM M4. I beleive the internals are still TM and some bits have been replaced with other brands. Runs flawlessly and is one of my most consistant AEGs kicking out 330 after 330. I have replaced the entire front end for one with the more realistic delta ring with the teeth so that I could fit some nice heat sheilded Brownells CAR15 slim handguards to it. I also put on a JG CAR15 Fixed carry handle A2 rear sight upper receiver on it, both pin fins are intact completely.  Receiver is ABS plastic but solid! and makes it a lighter load to run about with. To complete the look I have popped on a WE Oldskool CAR15 stock. To top off the Black Hawk Down-ness ive given it a desert camo paint job, but to make it more practical for woodland games, through a bit of green in there too.
 
wired to deans, need skinny 1350 MAH 7.4 lipos.
 
Will consider GBBR M16/xm177/m4cqb guns or parts as trades/part ex
 
I will include 4 high cap mags.
 
£170 plus postage
 
Will post via UPS in a box and well secured.
UKARA/Valid Defence required
 
This is my safety sir..

Helmet repro accessories from Vietnam period, price includes postage
Thanks for looking 

Only released this year, the Gen.4 G17 comes with all the latest updates to Marui's ever popular Glock line.
 
To ensure the CNC Aluminium slide was adjusted to fit perfectly, I didn't do it myself but took it Negative Airsoft...who incase you didn't already know, knows a thing or two about GBB pistols.
 
As with most of the stuff I've bought recently, this hasn't been skirmished. However being a GBB there will be some marking from the mags it's had through it in the garden and where I've dismantled to change the trigger etc.
 
With a hair trigger pull, short-stroked (both can be adjusted) recoil, flared magwell and night sights, this would be a CQBeast. Equally at home in woodland, boasting supreme range and accuracy with the maple leaf barrel in combination with the Flamingo bucking. Not to mention so far I've found it cools down far slower than many other pistols I've used. I put this down to the Marui base components still being present and using a top quality CNC slide.
 
To summarise, package includes:
Tokyo Marui Gen.4 G17 base - £140
Detonator CNC Aluminium Slide & Outer Barrel - £210
Maple Leaf Crazy Jet 97mm 6.04 Inner Barrel - £21
Flamingo 50 Degree Bucking - £9
Guarder Green Steel Night Sights - £30
Cowcow Short Stroke Recoil Spring Guide - £25
Cowcow Tactical Trigger (adjustable travel, currently set very short) - £30
Cowcow Tactical Magwell - £20
Cowcow Mag Base (x2) - £15 each
Glock Hard Case - circa £25
1 x 25 Round TM Mag - £25
(so total of three mags included)
Total = £565 (not including labour)
 
**Surefire X300 torch NOT included**
 
Price reduced due to minor damage in bottom of the frame (pictured). This does not affect the performance or even how the gun feels in the hand, especially when a backstrap is attached, then it's not even noticeable. Also one of the back straps is missing. Guarder aftermarket frames are normally £25 - £30, as such I would ordinarily have just replaced it but they haven't released one for Gen.4 yet. When they do, you will be able to swap it over and completely erase this issue plus have better quality frame.
 
Stated price includes PayPal fees and tracked courier. Any questions are usually answered quickly providing they are PM'ed as I don't receive notifications for anything posted on the ad.