Kha0s

I've discovered a lot of the retailers I used to use no longer exist, so this is a big help! Cheers

I was running Nimh batteries in all of my guns before I stepped away, but had bought an internal conversion kit and corresponding LiPo for my KAC PDW. I didn't have a balance charger at the time so never got round to using it, but it will be sat in one of the storage boxes. I'll follow your advice and get rid of it ASAP! Fair point on the seals, not really worth the hassle when I could just replace with new. Once I've done a full inventory, I'll get an order in for new hop buckings and any orings I'll need for the mags.

Thanks for the feedback! That thought of buying new had crossed my mind, but part of the reason I was wanting to get everything in working order was so that I could sell at least a couple of the guns off. I'll need to dig everything out and do a full inventory but I had definitely gone a bit overboard with purchases before I stopped playing. I'll plan for new hop rubbers and a barrel clean for each as a minimum and take it from there. Regarding GBB mags, do you reckon soaking the seals in silicone oil or similar would be enough to revive them, or will they likely need replaced entirely? I'd like to think I had everything filled with maintenance gas, but I'm not sure I did.

Hi - I'm looking to get back into airsoft after a ~10 year hiatus and have a few AEGs, some gas pistols and a spring bolt action that have sat in storage this entire time. Is it safe to assume all of my RIFs will require a bit of work before they are ready to field? I'm thinking at a minimum the seals on all of the GBB mags will have perished and there's a good chance most of the batteries are dead? Are hop rubbers also likely to be bust?Will all of the gearboxes need re-greased too? Anything else I should be considering? Cheers!