bobbits_91

For sale is my upgraded NGRS M4 that I’ve used as my primary for the last 4 years, probably around 12-15 skirmish days in total. It’s been upgraded with an Eagle 6 spring to give it a consistent 335-340fps and I’ll include the original 300fps spring as well. It also has an upgraded lonex barrel bracket to keep the outer barrel rock steady - the original part isnt very strong but I’ll include that as well. Has also been upgraded with an ASG ultimate boost 30k high torque motor to pull the stronger spring and will ship with the 2 x black plastic body spacers and hop unit spacer as well (all removed as it makes working on the gun a bit trickier), as well as the standard mid cap magazine that’s switchable between 30 and 82 rounds. The SOCOM model is the best in the range in my opinion as it’s the only one that comes front wired with a mini Tamika connector instead of the proprietary recoil shock magazines, giving you tonnes of space in the hand guard for your battery of choice and leaving the buffer tube free to install any kind of stock you want. Very little sign of wear to the barrel or furniture as I’ve been running this with an Angry Funs L119A2 rail and magpul furniture the whole time I’ve had it. Things to note: the upgraded spring is a lot stronger than stock so you need to make sure you run a powerful battery to prevent the gun locking up on semi-auto if you spam the trigger, otherwise you’ll have to flick it into auto and fire a burst to unlock it. I’ve tried my best to show any signs of wear to the body, the main thing to note is that I stripped the screws to the stock guide on the buffer tube so this is held in my place with electrical tape now (which also doubles as a handy way of eliminating any stock wobble) and I have rewired the front of the gun as I accidentally cut the original wiring when installing a different rail system - I’ll include a spare front wiring loom in the price as well, along with the original Marui motor. Finally, I am open to selling any of the extras shown in the pictures along with the gun to anyone interested, but please note these are not available separately while the gun is for sale. - 10.5 inch outer barrel - £45 - TM hop unit with Prometheus tight bore barrel and flat hop installed - £50 - PTS EPM midcap magazines, switchable between 30/120 rounds - £20 each - 750 mah LiFe battery - £15 - 1500 mah LiPo PEQ battery - £10 - 1000 mah LiPo battery - £10 - PEQ battery box (cable fits through vent holes in hand guard) - £5 £235 of extras that I’ll include for a total price of £550 for everything and the rifle if bought together. The rifle by itself will be £385 and postage will be £20. Feel free to ask me any questions and check out the YouTube videos below to see the gun in action and being chronographed as well.

Fantastic replica Trijicon 4x32 ACOG sight with functioning green fibre optic reticle. Also includes RMR battery powered red dot sight on top and back up iron sights. Sold as used but virtually brand new, no obvious marks or scratches and everything in perfect working order.

The Angry Gun L119A2 Rail from Angry Gun was inspired by the UKSF L119A2. This is the CQB (short) version for 10 inch barrels. It is compatible with the M4 AEG, WE, GHK, KWA, MWS GBBR Series. FOR PTW, WA, VFC, INOKATSU, VIPER TECH GBBR. YOU NEED TO BUY THE EXTRA L119A2 BARREL NUT The package contains: Rail System x 1pc AEG Thread Barrel Nut + spare barrel nut Length: 234mm Weight: 660g ** Tokyo MWS GBB series need extra Outer Barrel Set or Barrel Spacer for installation** This has been taken off my Tokyo Marui recoil shock airsoft gun so I can vouch for it fitting perfectly on that - please do your research to make sure it is compatible with your airsoft gun before bidding. Virtually as good as new, some very light stuff marks but in overall great condition. These are getting increasingly rare (and expensive to find) these days - don’t miss your chance to own a bit of history and turn your airsoft gun into a replica of the famous Obi Wan Naoribi incident involving SAS trooper Christian Craighead

Selling a virtually brand new Army Armament R17 Glock 17 GBB. Polymer slide and frame version, compatible with Tokyo Marui and WE parts and magazines. Never skirmished, only had about 3 or 4 magazines fired through it in the back garden - surprisingly accurate and snappy pistol with great efficiency and cold weather performance thanks to the polymer slide.

Like new, TM MP7 aeg/aep - never skirmished, fired about half a dozen times inside and in the garden. These are sold out almost everywhere now so don’t miss a rare chance to own an amazing aeg. Perfect CQB or sniper back up weapon firing consistently between 265-270fps on 0.20g bbs. Don’t let the fps fool you - thanks to the marui black magic the hop up on this thing is amazing, to the point it matches the range of my recoil shock M4. Comes with the following accessories: TM MP7A1 AEG - RRP £265 Marui charger - RRP £28 AEP battery - RRP £15 2 x AEP vapex lipo batteries - RRP £30 2 x MAG mid cap magazines - RRP £20 TM low cap mag - RRP £20 Laylax power upgrade spring - RRP £10 2 x TM aep battery adapters - RRP £16 FMA H&K mock suppressor - RRP £45 As I say, the gun and a lot of the accessories are out of stock absolutely everywhere and the included lipo batteries give the gun an amazing fire rate and improved trigger response compared to the stock battery. Last picture shows a slight paint chip from where my sling has rubbed against the back of the receiver, other than that, as good as new. Check out the video link to see the gun in action and the chrono results. P&P £10

The Mk.V Sten was produced in 1944 when the threat from Nazi Germany was less immediate, these were a better quality version of the MkII, with a wooden pistol grip, fore grip and stock with brass butt-plate and cleaning tools chamber inside the stock. A No 4 Lee-Enfield foresight and a bayonet mount were also fitted (will fit a no.4 or no.7 bayonet if you have one) used primarily by airborne paratroopers from the 1st and 6th Airborne. Northeast are in our opinion the best WW2 replica firearm manufacturer next to Shoei Japan. All steel construction, to the correct dimensions and gauge! If you want a 'real' Sten that's also great fun to disassemble and shoot, then this awesome airsoft replica was made for you. Almost completely hand built, by craftsmen, including genuine brass buttplate and storage area for the including genuine plastic/baker lite oil bottle. Authentic markings/trades, field strips jus like the real thing and kicks almost as hard - selling as brand new as it’s only fired one magazine and I can’t justify keeping it around just to sit on my shelf - this beauty deserves to be used! Click the link below to see this beauty in action:

Amazing opportunity to own what is not only the best Sten replica on the market, but possibly one of the best GBB models available anywhere. Full metal, real life weight, field strips exactly the same as the real thing and the kick/recoil feels like a genuine 9mm sun machine gun – has to be heard and felt up close to be believed, especially on full auto – even the gas coming out of the action of the sideways facing magazine housing adds to the realism. Upon assembly you will be impressed with the feel and heft. The magazine takes 7-8 seconds to fill with gas fully and once BB’s have been added, she shoots and fires brilliantly. Should you wish to strip and service her, this can be achieved with no tools as she field strips just like the real thing! The hop up is adjusted by folding the magazine housing to face the ground (used for storage as well), unscrewing the barrel heat shield and pulling out the outer barrel assembly with the hop adjust wheel being accessed through a slot machined into the outer barrel. This is a stunning reproduction of the later version of the MkII STEN which had the ‘hour-glass’ working safety cocking handle, previous models had no safety mechanism at all!. Anyone who is a fan of the real thing will appreciate owning one of these, whether it’s for airsoft or reenactment. This sten has never been skirmished has had less than 100 bbs shot through it – I can’t justify keeping it just to display it on my shelf like it has been. It cost me £380 new, plus another £50 for an extra mag, £30 for a genuine reproduction sten case that includes storage for 4 mags, a loading tool and of course an disassembled sten with a separate storage pocket for the stock, £10 for a reproduction sling, £20 for a reproduction pistol grip (perfect for that resistance look) and £10 for a reproduction, genuine war issue sten instruction manual. So, that £500 worth of kit for a virtually brand new and boxed Sten replica, complete with replica war time markings and trade marks. Please view the video links below to see it in action. Check out the video below of this in action: