Arrtee99

Hello here for sale is my collection of AR rifle parts with one complete gearbox & lower assembly. The uppers are all G&P (Clockwise threading on the barrels) and can be swapped out depending on which type of rifle you are looking to use. 
From top to bottom:
-M4 flat top upper with adjustable 10.5" guarder steel barrel.  I believe this was designed to account for the various airsoft tolerances with hand guards and rail sections. Not been made for many years now though. There are 2 grub screws on the top and bottom of this barrel that allow you to shorten or lengthen depending on what you are looking to fit. This is CCW 14mm threading. No inner barrel or hop up.
-G&P XM177E2 upper and barrel section. Also with this is a shorter muzzle brake without vents. I would usually use the hop unit/inner barrel thats currently fitted to the complete RIF with this upper so no spare with this. 
-G&P Colt 602 slickside upper with correct chrome faux bolt plate. Spare front receiver magic pin fitted on this one.
-G&P M653 with blue steel 14.5" pencil barrel. This was bought separately and swapped with an original aluminium one years ago. The gearbox has SHS high speed gears fitted and possibly some other upgraded parts but cant be sure without opening it up which I don't have the patience to do anymore. Rear wired to deans to the buffer tube, which is one of the nicer threaded cap ones. You will need a fairly small lipo to fit. I always used 1000mah 7.4v vapextech ones which usually lasted a whole skirmish day with a full charge. 

Looking to sell to someone who is interested in the classic ARs and would take the whole lot in one go. Took a while to accrue these parts as it usually meant taking parts from other RIFs.
Looking for around £310 posted with paypal fees included. I will only split parts if its a very good offer. 
UKARA or next best valid defence will be required for sale to go ahead. 

Hello reader, 

I am selling an colt AR carry handle scope. I got this in a package deal with a RIF as a sweetener so other than fitting it to some rifles for photos thats about it for personal use. Previous owner(s) have for some reason tried to remove the screws from the mount so they are a bit grugged but all still fitted tight. It has a little wear and tear around the edges but nothing broken. It has J A P A N - A O marking on the bottom but my phone camera is not good enough to focus properly. On the top it has the Colt logo printed. The crosshair reticle is one of the finest I've seen in all colt scopes, repro and real, I've seen and owned. Might be a gamble but it could be a genuine japanese original from the late 1960s to early 1970s onwards. I would say it is more likely this is one of the earlier Brownells reproductions they've started selling since around 2018 onwards.

On the Brownells website a new one's RRP is £419.90 as of writing this advert (01/06/2024) so an asking price of £215 with postage and PayPal fees included I feel is reasonable.
Thanks for looking.

Selling my E&C M16A1 + 14 MAG mag VN mags. Looking for £220 posted all in.
Great AEG, features the QD 2.0 spring change system which is fast and easy, rear wired to mini tamiya as standard.
Used in a total of 2 games, fitted with a Maple Leaf MR 60, airsoft pro omega nub, tighter hop adjustment wheel o-ring and a cut down Guarder 100 spring.
Firing at around 335 fps on .20s, 280 fps on .28s (will be checked before sold)
 
UKARA/Valid defence required, will be checked and must match with purchaser's details.

Selling my ICS MX5 Pro MP5A5 + 10x King Arms plastic mid caps and AIM sight rail. Looking for £300 posted all in.
Very solid AEG with its stamped steel receiver and the bonus of precocking on semi providing snappy shots, as well as 3 round burst thanks to its mosfet. Wired to mini tamiya as standard.
Used in 4(?) games, fitted with a Maple Leaf Macaron 60, airsoft pro omega nub, firing at 328 fps on .20s, 270 fps on .28s with hop (will also be checked before sold)
 
UKARA/Valid defence required, will be checked and must match with purchaser's details.

Selling 7x gas tight MWS mags, £240 all in posted.
 
Will only split off 3/4.

Classic Army CA33 (HK33)
An old model of the HK33 still in working order. Completely stock except for the rear stock pin which I dremeled out to accept a real steal Large HK stock pin so there would less chance of small pieces getting lost. Chronos below 350fps but dont recall what it is exactly. I have used in several games. Also, if its your thing, this can be HK slapped
 
Comes with original box,original stock pin and real steal large pin, a low profile Classic Army picatinny rail and 8 mid-cap magazines (2 x 90rnds and 6 x 150rnds). 
Rear wired to small tamiya but wire is extremely short which is why I modified the stock for ease of access. Butt pad is also removable. 
I can post for £15 / possibly more depending on the buyers location. Collection is also welcomed. Please ask for more pictures / information
250 or nearest offer. No swaps or trades/px.