Arrtee99
-
Posts
57 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Arrtee99
-
This advert is COMPLETED!
- For sale
- Used
Hello here for sale is my collection of AR rifle parts with one complete gearbox & lower assembly. The uppers are all G&P (Clockwise threading on the barrels) and can be swapped out depending on which type of rifle you are looking to use. From top to bottom: -M4 flat top upper with adjustable 10.5" guarder steel barrel. I believe this was designed to account for the various airsoft tolerances with hand guards and rail sections. Not been made for many years now though. There are 2 grub screws on the top and bottom of this barrel that allow you to shorten or lengthen depending on what you are looking to fit. This is CCW 14mm threading. No inner barrel or hop up. -G&P XM177E2 upper and barrel section. Also with this is a shorter muzzle brake without vents. I would usually use the hop unit/inner barrel thats currently fitted to the complete RIF with this upper so no spare with this. -G&P Colt 602 slickside upper with correct chrome faux bolt plate. Spare front receiver magic pin fitted on this one. -G&P M653 with blue steel 14.5" pencil barrel. This was bought separately and swapped with an original aluminium one years ago. The gearbox has SHS high speed gears fitted and possibly some other upgraded parts but cant be sure without opening it up which I don't have the patience to do anymore. Rear wired to deans to the buffer tube, which is one of the nicer threaded cap ones. You will need a fairly small lipo to fit. I always used 1000mah 7.4v vapextech ones which usually lasted a whole skirmish day with a full charge. Looking to sell to someone who is interested in the classic ARs and would take the whole lot in one go. Took a while to accrue these parts as it usually meant taking parts from other RIFs. Looking for around £310 posted with paypal fees included. I will only split parts if its a very good offer. UKARA or next best valid defence will be required for sale to go ahead.£310
-
.thumb.jpg.6456a78f668b31403ebf4fe7425dc3da.jpg)
This advert is COMPLETED!
- For sale
- Used
Hello, for sale is one KWC gas blowback M1911A1 pistol. Well used and loved M1911A1 that I've used for many games. Nice snappy kick to it and functions well. The nozzle has an airsoft surgeon floating rocket valve so it is more or less always shooting at 1 joule of energy. The two short mags do still seal however could do with being replaced as they have to be done up very tight. The extended mag is quite new though and has only been used once or twice. Looking for £110, paypal fee and postage included. UKARA or other valid defence will be required for sale to go ahead. Thanks for looking£110
- GB
-
This advert is COMPLETED!
- For sale
- As new
Hello, for sale is one KWC gas blowback Makarov pistol. As you can see it is not the fixed slide version KWC also make. Bought years ago to make into a Makarov PB but never got round to it. Condition is more or less new and unused aside from some test shots in the garden. Comes with 3 magazines, 2 of which are unused. Note it will shoot hot when a new co2 bulb is fitted but after clearing a mag or twos-worth of shots its site safe. Looking for £125, postage and paypal fee included. UKARA or other valid defence will be required for sale to go ahead. Thanks for looking£125
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
As the title says I am looking for a Mafioso GBB Thompson M1928 SMG. Thats the older kind with the charging handle on top, not the side. Having contacted SWIT airsoft, who claim to be able to have one made up yet talking with Mafioso they aren't currently manufacturing them I'm looking to the second hand market instead. Prepared to pay a pretty penny for one, possibly trade if I have something that takes your interest for it. I can collect if postage is not an option. Thanks for reading£12,345
-
Is that a real HKS speedloader? Are the shells compatible? Very cool if so
-
.thumb.jpg.220e26011249703e7bc96a470faf8496.jpg)
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Hello here for sale is one Guarder Aluminium Series'70 M1911 Slide with markings, brand new, minus the packaging. It is Tokyo Marui spec Looking for £60 with postage and PayPal fees included. Thanks for looking.£60
-
This advert is COMPLETED!
- For sale
- As new
Selling my G&G FNC/AK5 (Model number GF 76-L / GF 85-L). Bought from new about 5 years ago and has maybe been fielded once or twice. Mostly just a wall hanger as seen in the pictures by little to no wear and tear. Soldered to deans; inside the hand guards. Due to peculiar German airsoft law this is laser etched with the shops name on the side (Kotte-Zeller.de) and was physically restricted to semi-auto fire only by modification of the selector plate. I rectified this but consequently the selector is a little stiff when changing from semi to 3 round burst (note this doesn't actually fire 3 round burst). I will include a spare selector plate in case this repair fails in the future. From memory this RIF is firing around 260fps with .28s. Both original FNC handguards and AK5 type handguards are included, I have the original box somewhere so will post it in that. The original g&g hi-cap will also come with the RIF. Bad bits are just some cosmetics marks that it has had from new. One is a faint scratch below the ejection port and the other is an imperfection in the finish on the top of the receiver. Looking for £340. Buyer pays paypal G&S and postage fees. UKARA or valid defense required for sale to go ahead. Thanks for looking :- )£340
- GB
-
This advert is COMPLETED!
- For sale
- Used
Hello, I have for sale one Classic Army SA58. Very well used but still all in working order. It is site safe but can't remember the exact numbers for chrono. Comes with: - upgraded inner barrel of some description. (possibly madbull but with taking it apart I am not sure) - 9 mid cap mags, 3 normal shaped hi-cap mags and 1 long style hi-cap mag. - a sheet metal home made top cover as well as the original railed one, complete with fixing screws. - extended outer barrel piece and a proper FAL muzzle device so it looks more like an actual FAL. Bad bits: pistol grip is a bit wobbly but doesn't effect use. Front faux gas plug has a bit broke off but is hardly noticeable. Last photo shows this. Looking for £290 with paypal goods & services fees and postage all included. UKARA number or valid defence required for sale. Thanks for reading£290
- GB
-
This advert is COMPLETED!
- For sale
- Used
Hello reader, I am selling an colt AR carry handle scope. I got this in a package deal with a RIF as a sweetener so other than fitting it to some rifles for photos thats about it for personal use. Previous owner(s) have for some reason tried to remove the screws from the mount so they are a bit grugged but all still fitted tight. It has a little wear and tear around the edges but nothing broken. It has J A P A N - A O marking on the bottom but my phone camera is not good enough to focus properly. On the top it has the Colt logo printed. The crosshair reticle is one of the finest I've seen in all colt scopes, repro and real, I've seen and owned. Might be a gamble but it could be a genuine japanese original from the late 1960s to early 1970s onwards. I would say it is more likely this is one of the earlier Brownells reproductions they've started selling since around 2018 onwards. On the Brownells website a new one's RRP is £419.90 as of writing this advert (01/06/2024) so an asking price of £215 with postage and PayPal fees included I feel is reasonable. Thanks for looking.£215
- GB
-
This advert is COMPLETED!
- For sale
- Used
Hello reader, I am selling an APS CAM870 AOW front end set. Came off a complete gun which has been rebuilt into a long gun instead. Parts included are the barrel w/ threaded muzzle cap, correct length magazine spring and magazine tube which holds 2 shells (3 if you ghost load one) and finally the one-piece fore end charging handle/action bars assembly. Should you want to fit this to your CAM870 you will just need the mag follower which your gun should already have. Looking for £140 posted with PayPal goods and services fee included. Thanks for reading.£140
-
This advert is COMPLETED!
- For sale
- Used
Hello reader, Here for sale is an AK-74MN made by LCT. Cannot remember the fps but Ive taken it to many games using .28s shooting under the limit which would be 296fps. From memory gearbox internals are completely stock, has a begadi rotary style hop unit fitted as I'm not a fan of the sliding ones. The spare parts in the small baggy are the other tensioners/nubs for this hop unit. Battery plug has been swapped to a deans style one. Will come with eight cyma mid-cap 5.45 mags that all fit nicely. Two are black, six are orange of which 2 have been painted to look more like bakelite. Looking for £300 posted but I might consider reasonable offers. Price includes G&S paypal fees and postage cost. UKARA number or valid defence required for sale to go ahead. Thank you for looking.£300
-
This advert is COMPLETED!
- For sale
- Used
Hello I have for sale one NorthEast Uzi that I originally pre-ordered from WGCshop last year. As much as I'd like to keep it I could do with the money for other things right now so it is begrudgingly being listed for sale. The bolt tracks have been greased and exterior oiled after each use with it. It has faint scratches/wear and tear all over from casual use and also some slight chipping where the top cover was exceptionally tight to begin with and needed a hammer and punch. It's okay now and can be done with strong hands. The short stroke buffer is removed for a more realistic bolt throw but will be included. It has been skirmished a couple of times with no failures except for one time where a bb got jammed in one of the bolt tracks which was fine after it was removed. It has a 1 joule nozzle fitted as it originally came with the overly powerful one. A spare 1 joule nozzle is included along with the original hot one (marked with faint red pen). Northeast also sent a replacement valve lock which I have not fitted yet as the current one still works fine. The RIF will be sold with seven magazines, also oiled after each use at skirmishes. One of them is currently leaking out of the exhaust valve. All are set to lock the bolt forward on empty but can be changed with the small tab at the top of the magazine. For the most part these mags have all been fine for me with only the bbs getting jammed up a couple of times although I put it down to trying to load too many bbs. Also included is one of the israeli double mag clips and a pair of comradequiche 3d printed loaders for the magazines. Will be sent in the original box if postage is required. Collection is an option if that is your preference. Looking for £650 altogether. A valid UKARA/defence will be required for sale to go ahead. Thanks for looking : -)£650
, Norfolk - GB
-
.thumb.jpg.727e9f444ff7ca5dd394c2cb4bac5036.jpg)
This advert is COMPLETED!
- For sale
- Used
Hello, For sale is a used LCT AKMS folding stock receiver and barrel. It was originally a complete RIF but got taken apart and had bits rebuilt into other RIFs. I intended to rebuild it one day but has instead sat on a radiator for a couple of years now. It has a bit of grub inside the receiver but otherwise is all undamaged and ready to be used. Looking for £150. Postage will be about £5 but collection is welcome also. If postage is required I will send the barrel detached so it is more compact, with the grub screws left in the receiver. If you would like any more info or pictures feel free to send a message although I might not reply immediately. Thanks for looking£150
, Norfolk - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey folks have a KJ works Beretta M9 pistol for sale. Fully working order with light scuffs around edges and on safety. Will come with 3 Co2 mags. Nice pistol but dont really use it and haven't for quite a few months so its just sat in a draw. I'd rather put the money to other things. Dont have any spare co2 bulbs to test at the moment but I'm pretty sure it is site safe as I have used it at games before. Any questions or want some more photos please ask. Looking for £100 posted or collection is also welcome£100
, Norfolk - GB
-
This advert is COMPLETED!
- For sale
- As new
Brand new in box Classic Army MP5k. Has the nice SEF lower, rather than the smooth navy style lower. Never been fired or even had a battery plugged in. Selling as it's only turned up recently for a project I had planned months ago that I decided not to do when it didnt arrive. If you'd like some more pictures or info please send messages. Comes with one steel hi-cap in the box but I have some extra mags somewhere I can include for no extra cost. Postage is included in total price. Cheers.£200
-
This advert is COMPLETED!
- For sale
- As new
Brand new bought from airsoft.tiger111hk almost a year ago. Took out the box to test it works but haven't used since. Essentially new in packaging. £50 takes it. Postage cost included unless buyer wishes to collect. Feel free to ask questions or for more pictures etc.£50
King's Lynn, Norfolk - GB
-
This advert is COMPLETED!
- For sale
- Used
Bought these a little while ago but no longer use them. Both are asura dynamics. The DTK1 is made of steel / B13: aluminium. £35 each with postage included. Questions or pictures feel free to ask£321
- GB
-
Best bet is to buy a new one from China or Taiwan bud. THey're quite a specialist thing so if somebody has one they aren't going to be selling it. airsoftglobal still have a load of trademarked receivers if you start there http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=32_222&products_id=2322 -
http://uk.redwolfairsoft.com/redwolf/airsoft/Magazines_MAG_AEG_MAG_M16_Mid_Cap_130rds_VN_style_Magazine_Box_Set_7pcs_Box.htm not metal bodied but very durable and high quality. Affordable too
