Killer Adam

APS rar 1.0 co2 shell ejecting sniper rifle.
comes boxed with 3 - 10 x 40 scope, 3 mags, bipod, and box of 5 angel shells.
also box of 5 skull shells if I can find them.
£375 all in
 
found the 5 skull shells

SOLD
 
New VFC VP9 Tactical Aluminium polished steel effect RMR cut slide (NOVA) 2x Gas tight new magazines  Bomber magwell Holy Warrior RMR Heine trijicon iron sights  (No light) Original box All 3 grip sizes   
New build no marks or scratches 
Huge saving over buying in parts 
 
24hr tracked signed postage £6.99

- Material: Steel Slide, Polymer Frame - System: Gas Blowback - Gas: Top Gas/ Green Gas - Hop- Up: Adjustable - Length: 240mm - Barrel Length: 128mm - Firing Mode: Safe/ Semi- Auto - Weight: 1150.00g   Feature: - Steel Slide - Steel Frame - Steel Front Sight - Steel Rear Sight - Magazine Catch - FPR JW3 Trigger with Trigger Ring - FPR JW3 Magwell - FPR JW3 Hammer - FPR JW3 Slide Stop - FPR CNC Nozzle Base and Nozzle Set - STI Stippling Grip - 5.4inch Steel Outer Barrel - Dummy Fire Pin - Hop-Up Chamber Inner Barrel Set - Safey Spring Plug - Grip Safety   Including FPR STI style real type magazine x 3 with TTI style base plate. not sell them separately . very good performance.

Hello Chaps 
 
I Am looking to sell my pride and joy RIF !!! I have had this maybe 4 years. And can honestly say it is the best gbbr I have ever played with in terms of realism. 
As you can see it has professional treated wood furniture on it l, with a light weathering finish across the metal. 
Colour changed bolt, fg restricted disc so fires under 350 fps, also shoots like a lazer !!! 
 
5 large gas tight magazines 
1 20 round gad magazine 
A real Thompson sling and carry case 
 
I would swap this for either a VFC GBBR FAL but not really another else 
 
Price includes recorded postage but not PayPal fees or you can come collect it from worcester 
 
Olloe 

KCO2 (RRP £300)
Magpul Hunter X22 Stock in OD green (RRP £170)
3x spare KCo2 Magazines (RRP £40 Each, I have more available and Co2 which I can include for extra) 
Rogueworx Genisis Kit (RRP £150)
Rogueworx Prodjnut inner barrel clamp (RRP £23)
Rogueworx bolt Carrier (RRP £65)
Rogueworx Tallon Charging handle (RRP £25)
Rogueworx Fang trigger and judgement sear set (RRP £85)
Fluted Outer Barrel (no idea on RRP) 
Also, has a few other small upgraded parts such as nozzle return spring, silent buffer pin and some other small parts (all Rogueworx)
Selling as I play too much CQB to really get the use of out this. 
Total cost new would be approx £900-£1000. I am looking for £600 collected from west Sussex. Interested in PX/Trades for VFC 416 V3 GBBR, other GBBR's. vortex sights or Olight Odins. 
Happy to answer any and all questions, and provide videos of it firing. Hitting the standard site limit of 1.8 Joules on a .32, but can be reduced/ increased with included genesis flow chokes

Thanks! 

Comes with all the following parts:

W&S steel internals
W&S Full travel bolt w/ 2-stage recoil rod (Faster ROF whilst maintaining full travel)
Hephaestus 1p steel trigger, much nicer trigger feel
Hephaestus steel outer barrel
B0bbly Aluminium hop unit (best on the market) + Modify X-range bucking
Hephaestus rear right rail
RS Bakelite grip, feels fantastic!
and of course, the magazine

This model has NO QC ISSUES, making it a pleasant gun to shoot and work on.

Slight issues:
Slight scratches on handguard, some wobble that needs shimming
I've encountered the occasional 2rd burst on semi, which is because the disconnector spring is tired, will include 3 replacement springs with the RIF.

Shipping and fees are included in the price, all safe n secure through G&S

Can send shooting videos upon request!
 

Archwick L119A2 MWS, built by archwick
 
In excellent condition, has been used a few times but in brilliant condition, comes in box, with tools for rail etc
 
Only note worthy thing is the base of the ergo grip is missing.
 
Comes with 1x GM PMAG
 
£1150
 
Copy and paste from archwick below, any questions don't hesitate to ask.
 
This ARCHWICK Colt Canada Licensed L119A2 is a complete Gas Blow Back Rifle with TM MWS Internals.
 
 
Fully Licensed by COLT Canada (via Cybergun & EMG)
 
5 Axis CNC Machined 6061T6 Billet Aluminum Monolithic Upper Receiver
 
5 Axis CNC Machined 7075T6 Billet Aluminum Lower Receiver 
 
MWS Upgraded Internal set by Guns Modify
 
CNC Steel Outer Barrel
 
CNC Steel Muzzle Device
 
One Piece CNC Aluminum Buffer Tube
 
CNC Steel Charging Handle Hinge
 
CNC Steel Ambidextrous Selector Switch, Bolt Release, Magazine Release
 
270mm 6.03mm tightbore barrel, and 60 degree bucking Unicorn
 
CNC Steel Barrel Removal Tool 
 
CTR Style Buttstock
 
ERGO Style Grip
 
Guns Modify Magazine
 
Hard Polymer Carrying case with custom cut foam
 
Mini Tool KIt

Collector so this has never been skirmished only test fired.
 
Sadly the collection has once again got out of hand 🤣
 
This was a passion project from a talented user on here called frontsite.
 
I would encourage you to check out his work:
Full list of upgrades below:
 
Upper
TM MEU base gun Guarder custom order aluminum kit for MEU (S.A. Pro model) Guarder Loading nozzle & valve Guarder lightweight nozzle housing Airsoft Masterpiece stainless barrel bushing Guarder steel front and rear sights Nineball vsr-10 purple hop rubber Guarder steel spring plug Guarder steel slide stop reinforcement (internal) Guarder steel dummy firing pin and pad Guarder stainless recoil spring guide Nineball dyna piston head Nineball 6.00 power barrel (112.5mm) Guarder steel outer barrel & chamber (nowlin .45 marking) AIP CNC brass hop adjusting wheel for hi capa  
Lower
Guarder steel mainspring housing for MEU (black) Nova Springfield ambi thumb safety (stainless, Cerakoted graphite black) Navidrex mahogany grips (custom order, square magwell cut and finished with tung oil) Nova 3 hole CNC aluminum trigger for MEU Guarder stainless trigger bow Guarder stainless sear spring Guarder steel hammer for MEU black Guarder steel hammer strut WIITECH CNC steel mainspring plunger AIP CNC steel hammer sear AIP stainless firing pin lock Cowcow IP1 stainless disconnector Guarder steel valve knocker Guarder steel hammer & sear pins Guarder steel grip safety (black) Guarder steel magazine release button Guarder steel slide stop (black) Guarder stainless plunger tube (black) Guarder stainless plunger pins (black) Guarder steel grip screw (black, finish is worn) Laylax (nineball) "AERO" purple gas routes for mag (x2) 2x TM MEU magazines New part added - Nova CNC mainspring housing.

Everything for sale the systema needs to be put back together message me for any questions thanks.

Original brand new complete 1P87 & 1P90 holographic & magnifier set with all paper works, cover, bags and mount
Located in London, the whole set for £1280 including postage
Open to offers
You can pay whatever way you want, including PayPal

Hello chaps 
 
I hav3 my Kar 98k for sales, this took me bloody ages to get weathered and restained... I went to the imperial War museum and wanted to get a RIF that looked like it could be on display.
 
I have never skirmished this rifle and only test fired in the garden
Very accurate !!
 
It's 350fps so can be used up close
 
£10 for delivery via PayPal 
 
 

As per the title, this is not a piece which has been bashed around an Airsoft site. Because of this it's in excellent all-round condition. Nit-picking you'd notice minor paint wear on the rear sight. Nothing else stands out as I look over it, but I've taken photos from a variety of angles in natural lighting, so the potential buyer can see for themselves.
 
Please note, this was previously listed with real walnut grips included. That is no-longer the case, this will now come with its original plastic ones. The price has been lowered to reflect this.
 
I believe these really are the pinnacle of Airsoft revolvers. My understanding is that the frame is made from metal and barrel from plastic but honestly, the finish is of such high quality, I couldn't even say for sure what's what when holding it.
 
Holds 14 rounds, so definitely skirmishable if you're so inclined. In that environment it would definitely make up for anything it's lacking in range and accuracy, by the sheer awesomeness of getting kills with a revolver.
 
Stated price includes PayPal fees and postage.
Please PM any questions, as I don't get notifications for anything asked on the listing.

**Limited Special DX edition 
- Nova CNC Steel Slide + Frame set 
- Nova CNC Steel Outer Barrel with Steel inner barrel + New Gen. Hop up Chamber set 
- Nova CNC Steel Guide Rod + 150% Guarder Spring set
- Nova CNC Steel Slide Lock + Thumb Safety + Grip Safety + Magazine Catch 
- Nova CNC Steel STI type Steel Hammer set 
- Nova CNC Steel Fiber Optic Front sight 
- Nova CNC Aluminum Real sight RMR Plate x 2 
- CNC Aluminum Custom type High power BBU + Nozzle Set for RMR system 
- CNC Aluminum Hammer Housing set + Dummy Fire pin 
- Nova STI type Polymer Grip set x 1
- Nova STI type Polymer Trigger / Wing set x 1
- Prowin Real Type Magazine x 3

- Tokyo Marui Hi-capa GBB series
 
Never used in Game
Very Good Conditions and Good Performance.
 
Only Ship in the UK.

Make: TM
Gun/Model: MWS MK18 Mod. 0
Accessories: 6 mags+ extras 
Condition: Used, good 
FPS: Stock
Splits/Swaps/Part Exchange: Y/Y/Y 
Price/Payment: £
 
For sale is my TM MWS MK18 Mod 0 build, this was put together with several parts and accessories to make it both an accurate clone and good performer. Parts list/ extras as follows:
 
TM Mags x 5
TM LMT Rear sight 
SOMOGEAR PEQ-2A visible 
G&P KAC NT4 Suppressor + Steel birdcage
Real Surefire M951
Real KAC 11 rib panels x2
Clone Aimpoint + Wilcox mount 
MWC PRI M84 charging handle 
ZParts forged Lower receiver (FN Trades + Cerakote)
Angry Gun M16A1 pistol grip
Angry Gun outer barrel
G&P Roller Bolt
G&P CAR stock + Clone pad
G&P KAC Grip
SixG Brass Nub
Modify Tan Bucking (Pre QC issues)
DP Spring set

Also have the following spares/ upgrades not currently installed:
DP Buffer seal
G&P Adjustable valve
Angry Gun ZET plate
TM Buffer
TM Springs
TM bolt
TM CQD Sling mount (RIS)
TM charging handle 
 
All in all the RRP of this build is over £1500, most of the parts purchased new and a few second hand. Even has two genuine KAC panels which were a pain to find!
 
To make the build 100% clone correct I believe the only changes would be an A1 Profile lower and a CQD sling plate.
 
The gun is in good working condition, the upper has had some model paint applied and partially removed for a subtle “worn” effect but otherwise everything is like new. The PEQ, optic and light all function well also. 
 
I would ideally like to sell this as a complete package but will consider splits for mags/ attachments etc. Current price is inclusive of the entire package!
Open to swaps/ PX for a VFC V3 GBBR 
 
Please PM with any offers or questions
Thanks!
 
EDIT: have had a lot of interest in the mags so would be happy to sell the entire package with 1 mag for £650

M249 Bullpup shell made by Almost Art. Shell for the standard M249 gearbox, made almost entirely of steel and aluminum.
Condition exactly as in the photos.

Reducing my collection, here is for you the best Airsoft pistol of 2023.
Is like new, used only home.
It has a tactical outer barrel (u get the original one too), stippled grip for a better grip and fiber optical sights, one gas tight mag.
Price is posted and PayPal

My buddy bought this with the intent of turning it into a DMR project but decided to give it to me after he impulse bought a springer rifle. After having it for a few minutes I can see why. 
 
To briefly sum it up: It works and is competent. Its probably stock internally and is totally usable as a full-auto only backup or for tinkering with on a future project if you're brave enough to tech an m14 (unlike me), however its a bit jank and crusty around the edges.  
It likes to stick after every shot when on semi however it has no issues working on full auto.
 
Overall range is decent, I believe from where I was standing to the end of my garden was somewhere around 20m-25m away and I could the target at the end accurately enough with a nice and flat trajectory each time. It even hits a few of the trees beyond my end wall (don't tell the council that though) without any noticeable dip or lift when the hop-up is dialled in right 
 
My friend was told it was about 340fps but I can't verify that as I have no chrono to test at home. I'd say its a bit lower and closer to 300fps based on the scientific method of using my eyes and having a guess.
The stock is plastic with a faux wood effect and it likes to try wiggle a few millimetres back, but it holds steady. The end cap around the barrel that overlaps the two parts of the stock down at the muzzle end has snapped off as shown in the pics and might be responsible for some of this stock shifting. 
 
There's a little piece behind the trigger that is missing but serves no purpose really other than to stop bits of debris getting in and around the gearbox inside. Don't throw it into a pile of sawdust and you'll probably be fine.
 
The mock charging handle is sadly not very satisfying to use, is very crunchy and has a habit of getting jammed. It serves absolutely no purpose other than a fun novelty anyway as the rotary dial hop-up is accessed underneath in the front of the mag well. 
 
Wired to Tamiya. Comes with 1 high cap mag.
 
Collection is welcome, happy to answer any questions, entertain offers and send videos of it working. I usually post between Wednesday - Friday each week.  

Are you a fan of Battlefield 1? Then you've probably seen this!
Here is a very special piece from history! With the Mosin Nagant widely available to eastern European civilians around WW1, rifles were being confiscated as armies invaded so civilians needed a way to hide there guns....shorten them! This is a Mosin Nagant "Obrez", a heavily cut down rifle for concealment. Must have been a pain to shoot back in the day though!
 
This is an exact replica of a variant of the Obrez, with most work done by the famous Showguns in Hong Kong. A one-off, you wont find this anywhere else! Based of a PPS Mosin Nagant, it operates fine, just dont expect good performance since the barrel isn't longer that an inch!
 
The rest of the piece has been professionally weathered and looks just gorgeous, this really is a chance to own a unique piece of history. Comes with a hardcase that fits it perfectly.
 
Featured on the USAirsoft channel, achieving a Number 2 spot on top custom pistol builds! (Skip to 25:17)
https://www.youtube.com/watch?v=Uuje2x4pbKg&t=1575s
 

Impossible to source Systema Infinity Kit build here for sale, you won't see many others, if any on the forums.
 
Included are the following;
Systema Infinity Kit, fitted and serviced.
Systema Ambi Fire Controls
Systema Infinity Cylinder
Systema Inner Barrel and Systema Hop Unit, hops .28s perfectly.
HAO Colt M4A1 Upper and Lower receiver
Reptilia CQC Grip
Magpul Enhanced Trigger Guard
Magpul Enhaced Dust Cover
Genuine CQD Sling Plate
HAO Buffer Tube and Castle Nut
Geissele Airborne Charging Handle
HAO Steel 14.5" Barrel, RS Threads
Bruno's 3D Printed KAC Suppressor, RS Threads, Metal
HAO Steel SOCOM 4-Prong Flash Hider, RS Threads
HAO Geissele Low Profile Gas Block and Tube
Airsoft Artisan KAC URX6 MLOK Rail
BCM MLOK QD Sling Mount
7x Magazines with Genuine Shells, Blackcat Internals. These are "floating Magazines" designed to fit and feed perfectly against the hop.
Magpul MLOK RVG, comes with box
Magpul MLOK AFG
Magpul SL-K Mil-Spec
5x XD60 Connector LIPO Batteries, they fit in the stock and don't rattle.
 
Asking £1850 posted on this beauty. This is a dream gun build for anyone, throw an Optic and light on and you're golden. No splits, no lowballs. Happy to provide more pictures and videos upon request, can also arrange collection around London.
 
Not included for the price but can be included for extra;
Browe Combat Optic, UKSF Contract Overrun. Basically an enhanced ACOG.
Surefire 640V with dual tail switch, MLOK and RIS Mounts. £400

Built from the highest quality materials. The intention was to skirmish it. It’s now looking for a new home. This thing is built like a rock and will likely never break. Given that it’s cleaned and oiled correctly, the only things that will likely need changing are consumables such as the hop rubber, the nozzle and the blowback unit o-ring.

It’s all been painstakingly filed, fitted and tuned and has had about 400 bb’s through it to test it during fitment.
I’ve designed it to be functional on standard propane gas as well as tolerate High-Pressure Air up to single-bolt sniper rifle power.

Here is a custom-built Hi-Capa 2011 pistol. The CNC lower frame by Airsoft Masterpiece with steel internals. The grip safety, mag release and hammer components are also all steel.
It’s got an adjustable trigger, with a steel trigger leaf, and has been set up with light and fast response. The grip is a CowCow Tech with grip tape.

The slide comprises of an Edge Razer CNC Aluminium slide (very rare to find) and very lightweight. Threaded outer barrel and guide rod are steel. The Blowback unit is CNC aluminium by CowCow tech, with an Airsoft Masterpiece nozzle.

It has a copper AIP hop-up unit with a brass hop wheel, the sights are fibre optic rear and front. There is a frame protector plate on the rear of the slide. The grip screws are like gold-dust! Steel lazer-engraved INFINITY screws, Infinity being one of the real-steel producers of 2011 pistols.
There are many custom components not mentioned. It's a ground-up build so expect the best in reliability and function.

All in all a pistol for life! Enough of unreliable sidearms. Though saying that, I’ve played pistols as primary weapons for years!
I've built many pistols over the years and speak from experience. Investing in a Hi-Capa means access to the largest pool of readily available pistol upgrades on the Airsoft market.

For sale is this customised Maruzen M1100 shell-ejecting GBB shotgun. Comes HPA tapped, with a pistol grip specification. Set up with rails currently installed. I will include 3 shells with the gun, you can still purchase these online.
 
Since this is still in transit, I'm happy to hold it for the buyer and wait for payment until its arrived, or payment can be arranged upfront. I run Raresoft and do this thing all the time, so happy to prove my credentials, you're in safe hands.
 
£295 to your door.

Good afternoon all,
 
Please excuse the photo, as I won’t be back at home for a few days - it’s really a place holder until I can take some more up to date images. The first image shows the gun with all the Rogueworx MP Rail, the second and third show it with the older G rail that is included. The Tanuki adaptor is NOT included in the sale. Cat not included either
 
Because my new job has taken over my free time, I’ve decided to thin out my collection of pews. 
This needs a new home. It’s about as far as you can take a KC02 and a proper unicorn build!
 
KC02
Ruger Sporter Stock in Grey Laminate
RogueworxNightwind HOM underlever 
Rogueworx Nightwind SSB
Nightwind V2 PPT Carbon barrel
Rogueworx Judgement set with Rogueworx Nightwind trigger
Rogueworx Nightwind mag release
Rogueworx Nightwind Morpheus handle (in case marshalls are being difficult)
Rogueworx Nightwind MP rail with steel wheel 
Rogueworx Nightwind G Rail just in case
Rogueworx Genesis kit
Flamingo 60* (still bedding in, I’ll include the Autobot 70* it replaced)
510 Edgi barrel
Rogueworx Silent buffer pin.
 
 
Price £900 or £1,000 with a rather snazzy grey Sig Sauer Whiskey 3-9 x50 scope that frankly shits on my Vortex Crossfire 3-9
 
UK only, collection preferred.

Truly heartbroken to even have to list this one, but one full Guarder upgraded Marui P226 fitted with a genuine M3 tactical light, with three Nineball routered and valved Marui magazines, all wrapped in a SIG branded hardcase.
 
Now, there is VERY little Marui left in this thing. I built this to be as realistic as it could possibly be, same materials where possible, as close to the original weight as possible etc, and it turned out spectacular.
It only contains the original trigger housing and hammer housing, everything else is Guarder, bar the inner barrel (PDI 6.01), a Nineball piston head and a Maple Leaf Delta hop rubber.
 
Full build list -
 
Tokyo Marui P226R,
Guarder Aluminium Frame,
Guarder Sig P226 Grips,
Guarder Steel CNC Slide With Lightweight Nozzle Housing,
Guarder Steel Outer Barrel,
Guarder Steel Luminous Night Sights,
Guarder Steel Hammer,
Guarder Steel Magazine Release,
Guarder Steel Magazine Catch Plate,
Guarder Steel Take-down Lever,
Guarder Steel Decoking Lever,
Guarder Steel Trigger (Early Type),
Guarder Steel Slide Catch,
Guarder Steel Dummy Fire Pin Set,
Guarder Steel Recoil Spring Guide (currently fitted with 130% springs, 150% included if needed),
Guarder Steel Sear,
Guarder Steel Knocker,
Guarder Steel Knocker Lock,
Guarder Aluminium Hop Chamber,
Guarder Nozzle and Valve Set,
Guarder Spring Set and Clips etc,
Nineball Dyna Piston Head,
Nineball Magazine Valves (Adjustable) x3,
Nineball Gas Routers x3,
PDI Steel 6.01 Inner Barrel,
Maple Leaf Delta Hop Rubber,
Genuine M3 Tactical Illuminator.
 
Built like a tank, with more steel than something really steely, weighs a ton, and cycles and fires superbly.
 
Is in like new condition having seen very little use outside of just breaking it in, never been outside and the only mark is a small scratch from the decocker. Slide locks with no issues (Green Gas), all 3x mags are tight.
 
All in all this has cost in excess of £800 to put together, I know, it's been a labour of love, but £500 including postage and PayPal fees will see it arrive safely on your door step.
 
JUST TO NOTE - I have no idea of the current FPS as I don't currently own a Chrono, however the magazine valves are adjustable so should be within skirmishable range.

Bought second hand at the end of last year for a lot more with a lot less. Since, I've replaced some of the attachments and had more upgrades put into it. Very recently it has been serviced and upgraded by BZ, having had the gearbox shimmed and new hop upgrades installed by them, so it's good to go. I dare not to think what I've spent on this, but its well above what I'm willing to let it go for, so get a decent deal. Speaking of letting it go, I just don't use it enough anymore as I prefer GBBRs and make the most of the time I can use them in the year, so its pointless having this money sitting around doing naff all. Onto what this bundle includes...
 
Internals
Ares M4 Base
Maxx CNC Aluminium Hopup Chamber M4A PRO
Maple Leaf Macaron Hop Up Rubber 60
Gate x-asr mosfet
SHS 16.1 Gears
SHS upgraded piston set
Metal Teeth
Upgraded Nozzle
Madbull Tight bore Barrel
Externals
Angry Gun L119A2 Rail
Angry Gun L119A2 Charging Handle
Magpul PTS ASAP Sling Plate
CTR Stock & LaRue Tactical RISR
ERGO AEG Pistol Grip
Attachments
3D Printed Surefire Flash hider + screw on SF Suppressor
M600 Torch
Pressure Switch for M600 + LA-5 PEQ
FMA LA-5 PEQ-15
AIM-O Aimpoint T2 Replica
x4 Ares AMAGs / PMAGs 130 round Mid Caps
Spare Night Evolution dual Switch + Dummy PEQ Box
TacBelts Minimalist Sling Multicam
Extras
Platatac Obi Wan Nairobi PVC Patch
Blackbeard Flag Patch
 
500 paypal + shipped - I'm willing to consider some sensible offers so please do contact me however you desire. I will provide extra info, photos, vids, proof of everything functioning etc.

Reluctant sale of this custom Kimber 1911. 
 
Based around a Nova Aluminium Slide and Frame, with a mix of Tokyo Marui and Airsoft Surgeon internals. 
I brought it a few months back as boneyard and 90% complete. 
Now complete and fires like a dream, even with the suppressor. 
 
Parts List:
Nova Aluminium Kimber Gold Match Ten II Slide
Nova aluminium Kimber frame
Nineball Aluminium threaded outer barrel
Airsoft Surgeon lightweight BBU
Nova Steel MSH, Safety, Beavertail and hammer (these have all been stripped and chemically blued)
King Arms AAC .45 Suppressor 
Tokyo Marui mag
 
Everything else is either Tokyo Marui or Airsoft Surgeon.
 
£180 posted