Richard89

Nae alot yet as ive just tested it, ill try and put alot through it this weekend and see. If that fails ill try cutting the spring down, would that cause any problems with cutting it down though ?

Sorry still very new with messing around with my gun and airsoft in general but what is the AOE ? So my gun still has the 30k motor using a 9.6v battery with a SP100 spring this is shooting 360 FPS, still to high :/ any suggestions ? I was thinking SP90 spring and tighter barrel to bring it up a little more near 350 FPS what you guys think ?

Hi there guys just a quick update i borrowed my brothers 9.6v battery and tested with the M100 spring and it works perfectly Thanks everyone for your help Richard

haha yeah takes about 4 min to take apart and get to it plus ive taken it apart and put together so many time now, so im learning alot which is good

thanks for everyone's input its much appreciated. Ill try the 7.4v 25c lipo option first with the selection of springs i have and go from there. I have a game tomorrow its just a shame i cant use the gun for it. Next time though

Oh could you point me in the right direction to a decent 20k long shaft motor ?

Thanks for that, your information helps alot. And yes its from the US as the ones her in the UK have been delayed so it does have the 30k motor. I assure you i have put it back together correctly as i checked over and over again then gave up and put the stock spring back in and works just fine. I think ill try say a 20k motor and different spring and go from there. Cheers, RIchard

Hi there guys i'm very new to airsoft played a few games with my little brother who has gotten me into the sport. I just recently received my first gun its a Krytac LVOA which out of the box using a 11.1v Lipo is shooting at 410-420 FPS, i need to get this down to 350 FPS. I thought all i needed to do is change out the stock M120 spring for a lower one, i went for a M100 but once i installed that it was double shooting in semi and the bb's rarely came out. I looked into this and think its to do with my motor being to strong for the weaker spring. Any help or suggestions would be much appreciated. Cheers, Richard