Yes I would be very interested in this. Usually I don't mind paying for the good stuff but not paying more for a torch then the pistol it goes on.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Condor VT holster
- Thread starter Seven
- Start date
- Thread starter
- #22
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F401558273429
View attachment 43846View attachment 43847View attachment 43848
PS. You'll want to switch the glass out for some polycarbonate.
My glass got shot out in 10 minutes flat. Thankfully didn't damage the reflector or light itself.
You can get the required polycarbonate discs here for just over a quid plus shipping... And I had mine delivered within 2 days of ordering.
https://www.mpa-airsoft.co.uk/products/clear-polycarbonate-disc-26mm
Last edited by a moderator:
- Thread starter
- #24
I'll let you know how it goes, whichever direction I decide to go...
I'll likely end up getting both in the end. One of them will do my primary capa and the other will be fine for my basic capa as a sidearm so they won't go to waste in any case, at least until DTD finish their product...
Last edited by a moderator:
- Thread starter
- #25
Well kydexcustom is a no-go...
Guess I'm stuck with the condor/viper until DTD finish their design in a couple of years ?
View attachment 43854
SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
Last edited by a moderator:
I'm looking at the Blackhawk Omnivore but looks like it requires "modification" for barrel devices. For the price of a kydex holster having to modify it yourself it's a bit much.
I'd probably get the condor to tide you over since you know what you REALLY want.
I'd probably get the condor to tide you over since you know what you REALLY want.
SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
If money is no option, get the Surefire HD1-R
Supports a lot of pistols, X300 series and takes suppressors
Supports a lot of pistols, X300 series and takes suppressors
Rogerborg
Supporters
- Aug 22, 2017
- 9,195
- 6,058
<Insert usual argle-barle about DIYing everything with your own Kydex and polycarb for 23p>
Have you considered slumming it with a universal textile holster? As you say, you'll only be using it to drop the pistol into briefly while you're "doing other things with your hands" (ewww).
Mine's a wrap around velcro effort that you simply size to the gun. Open at the bottom, so shouldn't be an issue with the tracer unit.
If it holds my bloaty electro-1911 with a light on it (and it does) then it'll hold anything. It's intended as a drop-leg rig, but it's not rocket surgery to secure just the holster itself to a belt or molle vest. The retention strap over the top isn't exactly quick release, but it also does the job.
https://www.ebay.co.uk/itm/392238894202
Have you considered slumming it with a universal textile holster? As you say, you'll only be using it to drop the pistol into briefly while you're "doing other things with your hands" (ewww).
Mine's a wrap around velcro effort that you simply size to the gun. Open at the bottom, so shouldn't be an issue with the tracer unit.
If it holds my bloaty electro-1911 with a light on it (and it does) then it'll hold anything. It's intended as a drop-leg rig, but it's not rocket surgery to secure just the holster itself to a belt or molle vest. The retention strap over the top isn't exactly quick release, but it also does the job.
https://www.ebay.co.uk/itm/392238894202
Last edited by a moderator:
- Thread starter
- #31
Yup that's exactly the style I ordered... That's very much like the viper/condor efforts but they come without the drop leg.
Only downside is it's molle so I'll have to mount it on my vest which is gonna make it mega awkward to holster or draw but as you say, it's only now and then so I'll live with it for now.
Last edited by a moderator:
Rogerborg
Supporters
- Aug 22, 2017
- 9,195
- 6,058
Derp, I should have googled "Condor VT holster" first.
Well, the good news is that it should work just fine. Huh, I'd have preferred those molle straps rather than the drop-leg / belt loop attachments on my eBay generic special. For the price of it, you could maybe take a punt on one of those too, to use for your backup 5.1 when you resurrect it from its own parts.
why reload when you can draw a new pistol.Derp, I should have googled "Condor VT holster" first.
Well, the good news is that it should work just fine. Huh, I'd have preferred those molle straps rather than the drop-leg / belt loop attachments on my eBay generic special. For the price of it, you could maybe take a punt on one of those too, to use for your backup 5.1 when you resurrect it from its own parts.
- Thread starter
- #34
Derp, I should have googled "Condor VT holster" first.
Well, the good news is that it should work just fine. Huh, I'd have preferred those molle straps rather than the drop-leg / belt loop attachments on my eBay generic special. For the price of it, you could maybe take a punt on one of those too, to use for your backup 5.1 when you resurrect it from its own parts.
Now that I think about it... My old dear is a wizz with a sewing machine. I might ask her to stitch the molle straps on the holster into belt loops... Easily reversed if requirement's change later...
Last edited by a moderator:
Rogerborg
Supporters
- Aug 22, 2017
- 9,195
- 6,058
Oh, if you want to run it on a belt, no modification necessary. Just feed the molle straps back underneath the 2nd and 3rd rows of loops, it'll be secure enough.
Last edited by a moderator:
- Thread starter
- #36
From what I see on pictures, there are no molle loops other than at the top and bottom of the holster, so 2 rows total, otherwise that was exactly my plan.
Rogerborg
Supporters
- Aug 22, 2017
- 9,195
- 6,058
- Thread starter
- #39
I saw this... Guess I'll find out when it arrives. Either way I'll make it work.
View attachment 43871
- Thread starter
- #40
If money is no option, get the Surefire HD1-R
Supports a lot of pistols, X300 series and takes suppressors
Sorry dude, didn't even see this post... That looks great but a little pricey for my usage scenario... Maybe a future purchase though... Especially if DTD's design fails.
Last edited by a moderator:
Similar threads
