The 'What have you just broken' Thread
- Thread starter Ian_Gere
- Start date
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
epic fail lol
Last edited by a moderator:
- Oct 20, 2012
- 5,120
- 1,703
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
n1ckh
Members
- Aug 21, 2014
- 1,323
- 609
I think what he's saying is that your asking whether an aep will fit in a universal holster ?? His remark is being sarcastic as I'm pretty sure it will as the holster will accommodate all pistols
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
- Oct 20, 2012
- 5,120
- 1,703
It's funny because you asked if your Glock would fit your holster. People said it would and then you made a post saying you'd broken it.
Like you'd broken it with the Glock.
Like people had recommended you put the Glock in the holster and it had broken it.
Like the Glock was too big for the holster and broke it after you put it in there.
Like you'd innocently managed to break your holster because of bad advice.
Jokes are 100 times more funny when they've been explained.
Like you'd broken it with the Glock.
Like people had recommended you put the Glock in the holster and it had broken it.
Like the Glock was too big for the holster and broke it after you put it in there.
Like you'd innocently managed to break your holster because of bad advice.
Jokes are 100 times more funny when they've been explained.
Last edited by a moderator:
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
......................I posted in what have you just broke..........I meant to post in just brought LMFAO!!!
What a tard!
Nice catch Prof, went straight over my head lol
What a tard!
Nice catch Prof, went straight over my head lol
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,736
Tuesday 3rd.....
I-Max B6 - CLONE crapped out on me I just discovered
thought it was battery but nope other lipo's refusing to charge
got another charger out of box, charges sweet, carefully check voltages across deans & seems quite accurate maybe 0.01v difference
(so shouldn't be overcharging like some chargers can - very risky)
Ahhhhh - noticed some a pair of insane very strong motors must have been placed/moved/knocked into very near vicinity of old B6
Hmmm - yeah these are mega mofo neodym motors so before anybody says clone B6 what ya expect...
Think the insane magnetic field may have perhaps played a part in it failing - or just general snide low quality crap B6
Will see how the other clone lasts away from them neodym Hadron particle collider bastid motors
Sunday 8th....
I hate these bastid toy guns.....
latest build of some bits n bobs....
wasn't happy with stuff so had her open a couple times and kept seeing white piston head covered in crap
cleaned and looked down cylinder - "seemed" ok
f*ck me today thought best check the neo + sorbo with neoprene on top sandwich pad...
absolutely hardly anything left - clean piston head again - great can just see her starting to crack
no biggie - ok just sorbo and thicker neoprene on top then
also noticed a little smidge lower fps whilst using a flat hop - hmmm ok a touch stronger spring with also stop her over running a smidge
yeah that is good....
doing her up motor sounds nice then followed quickly by a swarm of wasps
great the thread stripped on grip and motor plate pops out hence the swarm....
FML - different pistol grip but does seem to work ok and no bad screeching chipping off teeth on bevel/pinion whilst trying to settle as she was all pretty much same setting thankfully - yeah still not sure about motor but she is sounding nice again and at least the piston / sorbo didn't smash up everything in 1,000 rounds time so yeah pretty lucky.......
Yup smidge stronger spring is working out 335-340 but feeding is a bit w@nked ???
try another midcap - nah still not great.....
hmmm some other bb's - ooops they are worse it seems......
ok some others then - yup bit better but still the odd misfeed ???
wtf - f*cking can't be, tappet travel increased so it has gotta be chambering better and delayer.....
gotta be hop unit/bucking......
so I'm trying 3 different hops 2 different barrels but a few differences but STILL the misfeeds
tape n crap coz 416 wobbly mag stuff - still not 101% and dry fires with what I think is bb stuck
no way I'm checking bb can slip through bucking without too much effort
Oh and certain high caps just won't click in - this 416 is a fussy bastid but ASG mid caps work well with tape n stuff
I'm thinking this is never gonna work....
F*cking bb's are getting stuck inside the midcap !!!
you can see the bastid's wedged themselves stuck up each other like a drag show in Vegas or something
FML x 1,000 - that is why I'm having so many misfeeds I guess AAAAAAAAaaaaaaarrrrrrrggggggggghhhhhhhhhhhhhhh
There's crap everywhere swapping all sorts of stuff about.....
I hate these guns - hate them hate them hate them
I-Max B6 - CLONE crapped out on me I just discovered
thought it was battery but nope other lipo's refusing to charge
got another charger out of box, charges sweet, carefully check voltages across deans & seems quite accurate maybe 0.01v difference
(so shouldn't be overcharging like some chargers can - very risky)
Ahhhhh - noticed some a pair of insane very strong motors must have been placed/moved/knocked into very near vicinity of old B6
Hmmm - yeah these are mega mofo neodym motors so before anybody says clone B6 what ya expect...
Think the insane magnetic field may have perhaps played a part in it failing - or just general snide low quality crap B6
Will see how the other clone lasts away from them neodym Hadron particle collider bastid motors
Sunday 8th....
I hate these bastid toy guns.....
latest build of some bits n bobs....
wasn't happy with stuff so had her open a couple times and kept seeing white piston head covered in crap
cleaned and looked down cylinder - "seemed" ok
f*ck me today thought best check the neo + sorbo with neoprene on top sandwich pad...
absolutely hardly anything left - clean piston head again - great can just see her starting to crack
no biggie - ok just sorbo and thicker neoprene on top then
also noticed a little smidge lower fps whilst using a flat hop - hmmm ok a touch stronger spring with also stop her over running a smidge
yeah that is good....
doing her up motor sounds nice then followed quickly by a swarm of wasps
great the thread stripped on grip and motor plate pops out hence the swarm....
FML - different pistol grip but does seem to work ok and no bad screeching chipping off teeth on bevel/pinion whilst trying to settle as she was all pretty much same setting thankfully - yeah still not sure about motor but she is sounding nice again and at least the piston / sorbo didn't smash up everything in 1,000 rounds time so yeah pretty lucky.......
Yup smidge stronger spring is working out 335-340 but feeding is a bit w@nked ???
try another midcap - nah still not great.....
hmmm some other bb's - ooops they are worse it seems......
ok some others then - yup bit better but still the odd misfeed ???
wtf - f*cking can't be, tappet travel increased so it has gotta be chambering better and delayer.....
gotta be hop unit/bucking......
so I'm trying 3 different hops 2 different barrels but a few differences but STILL the misfeeds
tape n crap coz 416 wobbly mag stuff - still not 101% and dry fires with what I think is bb stuck
no way I'm checking bb can slip through bucking without too much effort
Oh and certain high caps just won't click in - this 416 is a fussy bastid but ASG mid caps work well with tape n stuff
I'm thinking this is never gonna work....
F*cking bb's are getting stuck inside the midcap !!!
you can see the bastid's wedged themselves stuck up each other like a drag show in Vegas or something
FML x 1,000 - that is why I'm having so many misfeeds I guess AAAAAAAAaaaaaaarrrrrrrggggggggghhhhhhhhhhhhhhh
There's crap everywhere swapping all sorts of stuff about.....
I hate these guns - hate them hate them hate them
Last edited by a moderator:
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Tm M&P9 v custom on its first skirmish the trigger snapped it half.?
Maybe my foot?
Maybe my foot?
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Probably but first I want this one fixed.Shouldn't snap that easy so now its Firesupports problem and if they dont sort it straight away then its a legal problem.Well done trigger
Uac speed trigger?
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,736
Phew.....
Thought I was gonna see a pic of your gammy smashed up foot
hope it is ok soon Mr Die Hard - Try Hard nutter
Thought I was gonna see a pic of your gammy smashed up foot
hope it is ok soon Mr Die Hard - Try Hard nutter
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
It will be fine I am sure.
Is it just the trigger I.e bit you put your finger on or is their internal damage as well
Similar threads
