2 little mods to my m4, help?

[walshy155]

I have a RIS rail for my m4 (cm16) and I have a stubby stock, like a m16 solid stock, the main problem is the ris rail how can I put it on my gun?

 

[M_P]

Which RIS?

 

[Liam Porter]

And which CM16? There are quite a few variants.

 

[walshy155]

The G&G CM16 carbine, the 100 quid one, the rail is a front rail (not sure about it's name) where the handguard is. It's meant to fit on the CM16 carbine.

 

[Airsoft-Ed]

Links?

 

[walshy155]

I have a picture.

http://oi48.tinypic.com/2mgnin6.jpg

http://oi49.tinypic.com/x58r2h.jpg

 

[TheFull9]

You're gonna need to take your front sight/gas block off your outer barrel as well as undoing your barrel nut to mount that freefloating rail, probably need to unscrew the flash hider as well to facilitate the front sight coming off.

 

[M_P]

You might have a problem then, I'm pretty sure the gas block/front sight on CM16's are irremovable.

 

[walshy155]

You might have a problem then, I'm pretty sure the gas block/front sight on CM16's are irremovable.

Click to shrink...

Ahh well can I still put the stock on?

And there's no way I can put the rail on?

Thanks guys.

 

[TheFull9]

I've never got a close look at a G&G AR, so perhaps the barrel nut they use has some unique feature that allows it to go over the outer barrel even with the front sight being permanently fixed. Depends what their actual process is in the factory really.

If your front sight has two pins going through it underneath the barrel then you may be able to drift them out and remove the block, otherwise perhaps take some pictures close up of the base of your barrel and maybe we'll spot a way to remove it.

You'll probably need a stupidly long philips head screwdriver to remove the currently-affixed buffer tube in order to switch your stock over. Try removing the cap on the end of your tube and having a look inside then report back.

 

[walshy155]

The front sight is removable I just don't know what to do with the rail itself, I've taken the sight off and the flash hider. The RAS/RIS rail is 7inches, and has a screw delta ring.

 

[BrutalLemon]

I have a RIS rail for my m4 (cm16) and I have a stubby stock, like a m16 solid stock, the main problem is the ris rail how can I put it on my gun?

Click to shrink...

I have a similar looking M4 at least. I was interested in how to put them on if you buy the whole rail system and I found a few videos on youtube which might help you.

This first one is Evike.com which seemed pretty helpful i guess

I found quite a few videos on my searches but forgot to favourite them all. sorry dude.

Hope this helps.

 

[Johnno]

I had same problem with mine it's easier to replace weird G & G 2 piece outer Barrel with 1 piece jobbie from another make which has removeable front Sight.