• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

Enid_Puceflange said:
Thanks to @Louish118

I enquired about his HK decals

He didn’t have quite what I was after, but was able to get these knocked up for my TM 416 which for some reason TM don’t do the trades on the right side of the magwell 

So here’s a before & after ?
Click to expand...


They look good - do you need to apply any kind of clear coat (lacquer) over the top for protection?

 
Speedbird_666 said:
They look good - do you need to apply any kind of clear coat (lacquer) over the top for protection?
Click to expand...
I haven’t yet, but was thinking of digging through my wife’s nail polish selection to see if she has anything suitable, as they will probably peel off eventually despite a proper de-greasing before application 

( I know I don’t have any in my makeup bag ?)

 
Last edited by a moderator:
MWS build is officially complete. Fitted it and maaaaaaaaaan it's a lot nicer than the stock pistol grip. Plus the NPAS should help me keep it from getting a bit too spicy. Might actually get a longer inner barrel for it now, since it's an m16a4 and beforehand if I put a longer barrel in it would creep to be hot (currently has an m4 length one that stops half way through the outer).

View attachment 108620

 
I bought a replacement v3 gearbox to replace the one I murdered in my aug. 

Now I'm busy googling how to drill the TM gearbox bush holes to fit the ones from the replacement....?

 
mightyjebus said:
Treated myself to some new camo. See if anyone can identify the type?
Click to expand...
At first I thought it was some sort of variant of Afghan national army uniform, but the larger digital squares I think it maybe Project Honor Camouflage? 

 
Last edited by a moderator:
yup..good guess and completely right.

Wouldn't mind a baseball cap in the same camo but bits are getting hard to find now.

 
mightyjebus said:
yup..good guess and completely right.

Wouldn't mind a baseball cap in the same camo but bits are getting hard to find now.
Click to expand...
I have never seen it outside of the US. It pops up on  Hopupairsoft from time to time, not sure how effective it is. 

 
A nice new 499mm zci barrel for my g3. only to discover that for some reason the tm g3 outer barrel is narrowed after 459mm to a point that the inner barrel wont fit through. Being relatively cheap metal and the scarcity of spares. I dont think trying to bore out the outer barrel is a worthwhile risk.

 
Picked up a Highlander 25ltr buckle up pack today from an army/navy store near me.

Got him down from £45 to £35. Was after a Viper one but I must say that the quality/strength and attention to detail is spot on.

It won't help me play any better but at least I can fill it with cake and sweets for when I'm sulking in the bushes! ?

Regards 

View attachment 108645

View attachment 108646

 
Impulse said:
MWS build is officially complete. Fitted it and maaaaaaaaaan it's a lot nicer than the stock pistol grip.
Click to expand...
I think the stock grip on an MWS, combined with the flat trigger guard is one of the most uncomfortable combos out there. Very wise to replace ?

 
Found a used TM G18C for a good price so decided to do a G18C build after the summer.

Also found that there’s not many aftermarket slides left out there for this particular gun.

But today this beauty landed from Japan after some minor hazzle with swedish customs.

The Nineball ”Eckesachs” slide. Some kind of carbonfibre abs mixture with metal reinforcements. Superlight and very sexy.

Can’t wait for autumn so I can get the rest of the parts and start the build..

View attachment 108719

Worth waiting for..

 
Last edited by a moderator:
Nothing spectacular but a very useful little bundle from Action Hobbies' boneyard...

Two sets of camo knee pads.

Lower face mask.

Pistol lanyard.

MTP baseball cap.

Bolle glasses.

Green snood with mouth protection.

Green balaclava.

All for a tenner.  I only really wanted the kneepads to replace my current ones bought from Screwfix, as the straps are showing the strain, but the other bits could be useful, especially if I take friends along.

The Bolle glasses won't get used in-game but are ideal for casual use when doing DIY etc

And I bought a pair of MTP combat trousers as my current ones are very faded.

 
Not going to buy any more pews...

DAMIT!

I really like the Barry Burton style M9 pistol but its too expensive so I found a cheapo version...

The HFC HG193 from the shop that shall not me named.  (Was on offer for £99.99 and its the new all metal version. Note the hole in the hammer)

It took some tinkering with the internals. (The hop rubber wasn't seated properly and a bit of the slide benefited from some filing)

When I got it the fps was 260 but after my tinkering its up to 300fps

It now shoots really well (for a cheapo gun) (It does have adjustable hop with a grub screw)

The compensator unit is easy to remove with one screw underneath but still holds well with no wobble as it slides onto the rails of the frame underneath.

So its easy to convert into a 92X Performance model. (Have to ignore the stupid engraving tho)

After my usual treatment of a new pew ?

View attachment 108917

I also added some extra weight to the front.  Its now a nice hefty 1.14Kg

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
510
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
587
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
702
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top