M4 mag adaptor for JG G36?

[Floperator]

I now have a JG G36C on the way... but before I splurge on a bunch of mags for it, does anyone have any experience with this M4 mag adaptor that came up during a search?

https://www.ebay.co.uk/itm/384376453785?hash=item597e9f3a99:g:ZKMAAOSwXI1hNeTs

It'd be bloody handy if I could use my existing M4 mags.

 

[Tackle]

I now have a JG G36C on the way... but before I splurge on a bunch of mags for it, does anyone have any experience with this M4 mag adaptor that came up during a search?

https://www.ebay.co.uk/itm/384376453785?hash=item597e9f3a99:g:ZKMAAOSwXI1hNeTs

It'd be bloody handy if I could use my existing M4 mags.

Yep they work, not as good as G36 mags but it's close, if your a bit of a "Hose monster" you may find they struggle to keep up. 

 

[Dusix]

You can grab this one https://www.bullseyecountrysport.co.uk/jg-works-g36-m4-magwell-adapter-with--nozzle-9801-p.asp , it's cheaper. Personally I use PTS G mags, they are expensive but slimmer than g36 original and works without any problems.

 

[Floperator]

Thanks lads.

I'm more of a single shot shooter and reserve full auto for 'panic mode' ? so should be OK.

 

[Shamal]

Thanks lads.

I'm more of a single shot shooter and reserve full auto for 'panic mode' ? so should be OK.

Wot? You mean there is a single shot switch??? ?

 

[Rogerborg]

You can grab this one https://www.bullseyecountrysport.co.uk/jg-works-g36-m4-magwell-adapter-with--nozzle-9801-p.asp

That what I use on my JG G36.  Like a fair bit of airsoft precision engineering, it needed a file waved at it to get it to fit, and to take mags, but once everything was neatened up, it works fine.  I've not had any feeding issues from any M4 mid or hi-caps, and it actually feeds better than the G36 mid caps that I was using.

 

[Floperator]

That what I use on my JG G36.  Like a fair bit of airsoft precision engineering, it needed a file waved at it to get it to fit, and to take mags, but once everything was neatened up, it works fine.  I've not had any feeding issues from any M4 mid or hi-caps, and it actually feeds better than the G36 mid caps that I was using.

Took a mag into work yesterday and had to shave down some of the internal tabs so that the mag release catch would engage, nothing too onerous. Seems to feed well enough. Hopefully there won't be much to do to fit it to the actual gun once it arrives.