THE TM MWS thread

[Guest]

New toy

View attachment 65611

View attachment 65612

 

[sonofsammo]

New toy

View attachment 65611

View attachment 65612

If only you had a drum mag to go with it...

 

[Guest]

If only you had a drum mag to go with it...

I might build one ??

 

[AlphaBear]

I might build one ??

Sod the drum mag. Look at that rail! That’s porn there I tell you now. Pure porn!!! ?

 

[Wild Weasel]

So Modify tan was a no-go for me with a standard barrel and six g nub shooting sub 350, any other suggestions?

I've got a ml Autobot 60° on the way but apparently that won't fit the window I've read?

Getting 60-70mm groups on standard TM hop rubber, would like to improve on that please 

 

[adas1223]

Any reviews / thoughts on the prowin ar9 kit?

its cool if you dont mind loosing bolt catch. the machining to get the bolt catch to work is a lot of precision milling of the recievers IMO, and im fairly good with tools.

i just took out the blue catch lever and tossed the bolt catch lever all together. 

my plan was just to have a small SMG which can swap mags with the TM glock. 

 

[Davegolf]

So Modify tan was a no-go for me with a standard barrel and six g nub shooting sub 350, any other suggestions?

I've got a ml Autobot 60° on the way but apparently that won't fit the window I've read?

Getting 60-70mm groups on standard TM hop rubber, would like to improve on that please 

At what range?

 

[Wild Weasel]

At what range?

Best all rounder please, Cqb and woodland sites mainly - I'd like 60m/196ft man-size hits ideally which is about what I was getting with the six g nub and TM bucking.

Like I said I've ordered an Autobot 60° but apparently the diamond contact patch fouls the front of the hop window. I'll give it a try and post piccys when it arrives though.

(Edit: 60 to 70 mm groups at 20 m range using super six g nub and TM hop rubber)

 

[sabaka]

hi guys,

question to owners of new tm mk18 mod.1.

is it worth it? or is better old mws?

thx, regards.

 

[ajumma]

Best all rounder please, Cqb and woodland sites mainly - I'd like 60m/196ft man-size hits ideally which is about what I was getting with the six g nub and TM bucking.

Like I said I've ordered an Autobot 60° but apparently the diamond contact patch fouls the front of the hop window. I'll give it a try and post piccys when it arrives though.

(Edit: 60 to 70 mm groups at 20 m range using super six g nub and TM hop rubber)

I’m using an autobot with the stock barrel, and also tried it with the edgi barrel which has a much more narrow window. It worked just fine in both. Just make sure you have a flat nub/concave nub to use with it otherwise you don’t get the performance you want. I’m using an omega nub but I reckon you could cut a small cube of eraser and it would work as well.

 

[Hypokondrikern]

Same here. I use a teal bucking paired with the stock nub which was stabilized by placing a metal rod inside. But I’ll try the Sixgun nub with a modify tan for the coming season as I have heard this is a tad better. 

 

[Hypokondrikern]

its cool if you dont mind loosing bolt catch. the machining to get the bolt catch to work is a lot of precision milling of the recievers IMO, and im fairly good with tools.

i just took out the blue catch lever and tossed the bolt catch lever all together. 

my plan was just to have a small SMG which can swap mags with the TM glock. 

Yeah, I feared that. The bolt lock is the charm of the platform. A smarter although costly solution would have been a new lower. Or at least no precision milling at home...

Im enticed by the light weight mags and increased mag capacity. But the limited nozzles is the next problem. Do you think one can order spares from prowin? Or is two of them enough? 

 

[Captain Darling]

Best all rounder please, Cqb and woodland sites mainly - I'd like 60m/196ft man-size hits ideally which is about what I was getting with the six g nub and TM bucking.

Like I said I've ordered an Autobot 60° but apparently the diamond contact patch fouls the front of the hop window. I'll give it a try and post piccys when it arrives though.

(Edit: 60 to 70 mm groups at 20 m range using super six g nub and TM hop rubber)

Is that 6cm on optics, red dot or irons?

At the weekend I was shooting stood up supported, getting 6" at 30m with propane, 6.03/303mm barrel, .32 Geoffs, TM bucking, biro mod and red dot optic.  Although it was a bit windy.  So your 6cm seems very good to me.

I'm tweaking my set up this week, and will give it a test.  I'm planning on the same 30m range, Mapp, 370mm Crazy Jet barrel, .32 Geoffs, Modify X bucking, SixG nub, HSB, and last but not least a decent x6 LPVO.

I've not even been able to skirmish the thing due to Lockdown2, but the more I get into it the less interested I am in picking up an AEG ever again.  If we say a 2.3 joule bolty and mk23 is like playing airsoft on hard mode, is the MWS platform, with its 1/2 kilo magazines like playing airsoft on ultra?  

 

[AlphaBear]

hi guys,

question to owners of new tm mk18 mod.1.

is it worth it? or is better old mws?

thx, regards.

Better to get a M4A1 or CQBR and then stick a madbull MK18 rail on it. The TM one you can’t get the rail off easily as you need a special tool which no one seems to make yet. 

 

[jsmithski]

Better to get a M4A1 or CQBR and then stick a madbull MK18 rail on it. The TM one you can’t get the rail off easily as you need a special tool which no one seems to make yet. 

Which gas block and rod fits the MWS with madbull mk18 rail? 

 

[Hypnosis]

Yeah, I feared that. The bolt lock is the charm of the platform. A smarter although costly solution would have been a new lower. Or at least no precision milling at home...

Im enticed by the light weight mags and increased mag capacity. But the limited nozzles is the next problem. Do you think one can order spares from prowin? Or is two of them enough?

If you've got a Dremel, a few files and a bit of sandpaper it's not too bad. Takes some time to get it right though. So far no issues with the supplied nozzle but the lockback only seems to function with the Prowin mags. You'd want a spare upper and bolt lock catch unless you're leaving it running glock mags only. The lower doesn't need modifying (bolt catch aside) 

 

[Wild Weasel]

Is that 6cm on optics, red dot or irons?

At the weekend I was shooting stood up supported, getting 6" at 30m with propane, 6.03/303mm barrel, .32 Geoffs, TM bucking, biro mod and red dot optic.  Although it was a bit windy.  So your 6cm seems very good to me.

I'm tweaking my set up this week, and will give it a test.  I'm planning on the same 30m range, Mapp, 370mm Crazy Jet barrel, .32 Geoffs, Modify X bucking, SixG nub, HSB, and last but not least a decent x6 LPVO.

I've not even been able to skirmish the thing due to Lockdown2, but the more I get into it the less interested I am in picking up an AEG ever again.  If we say a 2.3 joule bolty and mk23 is like playing airsoft on hard mode, is the MWS platform, with its 1/2 kilo magazines like playing airsoft on ultra?  

Crossfire red dot sight.

 

[Wild Weasel]

So, the Autobot 60° seems to have done a damn fine job coupled with a six g nub. 

View attachment 6568040mm groups!!!

Rifle was clamped the whole shoot and the very first group shot is the one with the black ring round it. 

Range is 20 metres, black painted patch is 50mm square, bb's Geoff's naturals black in. 3g flavour, propellant is Mapp gas and she's shooting around 300fps with three clicks of hop.

Now all I've got to do is sort out my bolt-lock again as the lube I'm using in 8° c makes it move up sluggishly causing the bolt to miss.

View attachment 65678

View attachment 65681

View attachment 65683

View attachment 65685

 

[jsmithski]

Getsome1000 is one hell of a lubricant. Super light and very slick.

 

[ahmetzia]

Hi everyone what a huge topic,

I just bought my tokyo marui MTR16 gbbr today. Which parts do you suggest me to buy for more fps, stability and recoil. (Barrel piston or etc.) I have not so much information about upgrades so if you can share the links, ıt would be much easier for me   300 fps is not enough for me  

Thanks Ahmet Ziya