THE TM MWS thread

[AlphaBear]

1 hour ago, Wild Weasel said:

Interesting..... I wonder if that will work with the Marui receiver?

 

[P4radox]

That's good to hear, thank you.

I think I will pick up those two together and see how I fair. I'd imagine with both the AG carrier, and the high speed buffer there's barely any recoil!?

Yes the recoil less ,but its different ,return for faster and more snappy.

So finally the enjoyment factor is increased ,more consistant less gas consumption I like it!

View attachment 62929

View attachment 62930

Anyways mucking always ended up with sucks!

Hi guys.  I installed a set of springs from Dynamic precision and now my weapon fires every other time.  The first bbs shot goes off, the second bbs shot doesn't go out, and so on.  What is the problem, please tell me?  Maybe I did something wrong?

View attachment 62920

If after each shot I reload the weapon, then bbs will always fly out.

Difficult to find out whats happened ,try to reassamble again!

 

[GregArm]

I just took it all apart and put it back together again, all the same, everything also shoots every other time.

 

[GregArm]

My screw flew off to the G&P CNC Enhanced Nozzle Valve 4.5

View attachment 62938

View attachment 62939

 

[AlphaBear]

Hi guys.  I installed a set of springs from Dynamic precision and now my weapon fires every other time.  The first bbs shot goes off, the second bbs shot doesn't go out, and so on.  What is the problem, please tell me?  Maybe I did something wrong?

View attachment 62920

If after each shot I reload the weapon, then bbs will always fly out.

The potential problem with after market parts / third party parts is that even though they claim to be 100% compatible with a platform they may not necessarily be in real life. 

What happens when you use the original Marui parts?

 

[Marroksteel]

Hao kit coming in today MWS is about 3-4 days out then I'll have 8 mags to fiddle with lol 3 prowin 50-55r, 4 saa pmag 35-39r, and the OG TM 30 mag but I'll only ever need to carry 6-7 and being able to edit the loadout like having the 50's for CQC/covering fire or swapping to the front pouches after clearing a mag is nice and picked up a new stock and grip.

View attachment 62943

View attachment 62944

View attachment 62945

View attachment 62946

 

[JSwan]

Hao kit coming in today MWS is about 3-4 days out then I'll have 8 mags to fiddle with lol 3 prowin 50-55r, 4 saa pmag 35-39r, and the OG TM 30 mag but I'll only ever need to carry 6-7 and being able to edit the loadout like having the 50's for CQC/covering fire or swapping to the front pouches after clearing a mag is nice and picked up a new stock and grip.

View attachment 62943

View attachment 62944

View attachment 62945

View attachment 62946

I like the look of the stock. Is that how it comes are did you put the paracord on there yourself? 

 

[SSPKali]

My screw flew off to the G&P CNC Enhanced Nozzle Valve 4.5

View attachment 62938

View attachment 62939

Probably just a Metric thread grub screw, easy to get a packet of them from Ebay or Amazon. Maybe throw a bottle of blue (mid strength) LocTite in the basket too!

 

[Davegolf]

@Marroksteel $$$$$ Are you the guy selling COVID masks and hand sanitiser? ?

 

[rekinxxxl]

Hello!
I just got TM MWS and its looking really good, although I would like to ask about small thing I encountered:
Pressing the button to release mag is smooth and easy in all cases BUT when mag has been shot and bolt locked back, then there needs to be a lot of force to press the button and release the mag. This only happens when the bolt locks back after shot, not when its locked back manually.

 

[Marroksteel]

I like the look of the stock. Is that how it comes are did you put the paracord on there yourself? 

It comes with it.

@Marroksteel $$$$$ Are you the guy selling COVID masks and hand sanitiser? ?

Haha I wish.

 

[sp00n]

136 pages ..... it’s taken me 5days (couple of hours here and there) to read this thread!

some really good info here, I am looking at pre-ordering a mk18 .... but after seeing that akm ????

decisions decisions ???

 

[GregArm]

The potential problem with after market parts / third party parts is that even though they claim to be 100% compatible with a platform they may not necessarily be in real life. 

What happens when you use the original Marui parts?

It works well with original parts, but I cannot achieve such good results.

Probably just a Metric thread grub screw, easy to get a packet of them from Ebay or Amazon. Maybe throw a bottle of blue (mid strength) LocTite in the basket too!

Thanks for the help.  Can you please send me a link or whatever this screw is called.

 

[AlphaBear]

136 pages ..... it’s taken me 5days (couple of hours here and there) to read this thread!

some really good info here, I am looking at pre-ordering a mk18 .... but after seeing that akm ????

decisions decisions ???

Whichever one you go for, just don't use Nuprol RZR bbs like I did and bugger up the gun... Thankfully it's an easy fix costing £30 for the nozzle and £10 for a new hop rubber... but still that's beer money used up! 

One point to consider, how easy is it to get hold of the AK MWS mags? I'm sure when the AK is released they may be available from the usual sources but you never know.... Also let's face it, that MK18 looks the dogs danglies....

Hello!
I just got TM MWS and its looking really good, although I would like to ask about small thing I encountered:
Pressing the button to release mag is smooth and easy in all cases BUT when mag has been shot and bolt locked back, then there needs to be a lot of force to press the button and release the mag. This only happens when the bolt locks back after shot, not when its locked back manually.

Nothing to worry about it.... just press the bolt stop and release the mag.... I'm sure mine did the same too when it was working....  the MWS is not like a namby pamby AEG. This is a real mans gun who has hairy fingers and bigger muscles in their fingers... ?

 

[PopRocket123]

Are there any drop in trigger units that improve the trigger press and aren't shit? I know about the G&P one but pretty much every time I see them mentioned on here it's someone complaining about issues with it. the two main things putting me off getting an MWS (besides being poor)are the trigger press and not being able to find any info on whether or not it will work with a folding stock adapter.

 

[SSPKali]

It works well with original parts, but I cannot achieve such good results.

Thanks for the help.  Can you please send me a link or whatever this screw is called.

I am not sure what size screw is needed but if you measure with some calipers the hole and round up to the nearest whole mm you should be able to Google for it.

Eg. If it is 2.78mm hole I would get some 3mm diameter Metric grub screws in a few lengths (6mm / 8mm / 10mm maybe?! Not seeing the original I am guestimating!)

Are there any drop in trigger units that improve the trigger press and aren't shit? I know about the G&P one but pretty much every time I see them mentioned on here it's someone complaining about issues with it. the two main things putting me off getting an MWS (besides being poor)are the trigger press and not being able to find any info on whether or not it will work with a folding stock adapter.

I would love to know this too!

TBH the MWS trigger isn't that bad, just has feel unlike AEG switches ?

I have found that stripping the trigger box and polishing the parts (and clearing out the grit and sand that the previous owner had filled it with!) helped a lot. Some 0.1mm shims (M4 and M6 size) to get rid of any excessive play / twist on parts can help but too many and it jams up...you need patience for that! I spent a previous life servicing and tuning MTB suspension so I love this sort of thing ?

I have a Wii Tech hammer and spring on order as my trigger set would not play nice with the Wii Tech marksman sear (maybe due to worn parts?) so I will report on that once I have fitted it all. The Wii Tech parts are really well finished but replacing the entire trigger box contents is about $200 ?? 

TL;DR: Don't let the trigger put you off.

 

[GregArm]

I noticed that the Guns Modify CNC 6061T6 Aluminum Complete Hop Up Adjuster Set for Tokyo Marui M4 MWS GBBR only raises bbs up to 0.32 grams.

The reason is clear to me, it works better for the original, but it broke a couple of months ago.  I want to lift 0.36 bbs, but with the red wheel it does not work, maximum 0.32

Do I need to order the original or is there an alternative to lift heavier balls (I have Super Nub and Modify tan)

View attachment 62992

 

[PopRocket123]

I am not sure what size screw is needed but if you measure with some calipers the hole and round up to the nearest whole mm you should be able to Google for it.

Eg. If it is 2.78mm hole I would get some 3mm diameter Metric grub screws in a few lengths (6mm / 8mm / 10mm maybe?! Not seeing the original I am guestimating!)

I would love to know this too!

TBH the MWS trigger isn't that bad, just has feel unlike AEG switches ?

I have found that stripping the trigger box and polishing the parts (and clearing out the grit and sand that the previous owner had filled it with!) helped a lot. Some 0.1mm shims (M4 and M6 size) to get rid of any excessive play / twist on parts can help but too many and it jams up...you need patience for that! I spent a previous life servicing and tuning MTB suspension so I love this sort of thing ?

I have a Wii Tech hammer and spring on order as my trigger set would not play nice with the Wii Tech marksman sear (maybe due to worn parts?) so I will report on that once I have fitted it all. The Wii Tech parts are really well finished but replacing the entire trigger box contents is about $200 ?? 

TL;DR: Don't let the trigger put you off.

I figured the breast way would just be a bit of work to the stock parts but I've got no experience with trigger components and the first time I try something I generally screw it up. 

 

[GregArm]

I am not sure what size screw is needed but if you measure with some calipers the hole and round up to the nearest whole mm you should be able to Google for it.

Eg. If it is 2.78mm hole I would get some 3mm diameter Metric grub screws in a few lengths (6mm / 8mm / 10mm maybe?! Not seeing the original I am guestimating!)

I would love to know this too!

Thanks, I'll try to find it.

 

[sp00n]

Whichever one you go for, just don't use Nuprol RZR bbs like I did and bugger up the gun... Thankfully it's an easy fix costing £30 for the nozzle and £10 for a new hop rubber... but still that's beer money used up! 

One point to consider, how easy is it to get hold of the AK MWS mags? I'm sure when the AK is released they may be available from the usual sources but you never know.... Also let's face it, that MK18 looks the dogs danglies....

Nothing to worry about it.... just press the bolt stop and release the mag.... I'm sure mine did the same too when it was working....  the MWS is not like a namby pamby AEG. This is a real mans gun who has hairy fingers and bigger muscles in their fingers... ?

I dunno ... as the years go by, I am less and less of a m4 fan ? I do kinda like the mk18 (wish it had a extended outer barrel though).
 

My main concern is availability of M4 mags, I know my local shop had 20’ish (all they could get) coming.... but there all pre-sold now. Then again with the ak, there is probably going to be a equal demand etc

edit:- I tend to keep going back to blasters bb’s