• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

EvilMonkee said:
But it would be working if he hadnt fucked with it :P
Click to expand...
WhimsicalUnfitArkshell-size_restricted.gif


 
Hi guys, so I really want to swap out my cqbr rail system but really struggling to find an barrel nut adaptor in stock, anyone know where to get one? Any help would be greatly appreciated.

And secondly anything I should know about madbull rails? 

Thanks guys!! 

 
Whisky1 said:
Hi guys, so I really want to swap out my cqbr rail system but really struggling to find an barrel nut adaptor in stock, anyone know where to get one? Any help would be greatly appreciated.

And secondly anything I should know about madbull rails? 

Thanks guys!! 
Click to expand...
What rail? Mad bull are generally good quality. I had a Viking tactical rail made by them years ago and it was very nice 

 
Do I need to lube the buffer tube/buffer? 

Also, anyone have recommendations for which triggers are good? I kinda want a flat faced trigger.

 
Also, @Wo1f the bolt still doesn't catch when I rotate it out 1 or 2 full rotations, only at the third full rotation out does the bolt catch. Is that bad? Should I upgrade to a steel bolt catch or something?

 
Have you ever moved your buffer tube before?

Have you removed the buffer and spring, are they in good condition and slide freely down the buffer tube?

Also the buffer bumper/plunger.

What FPS is it shooting at?

Is the piston seal in good order / lightly silicone greased?

 
Last edited by a moderator:
the3rdlegion said:
Also, @Wo1f the bolt still doesn't catch when I rotate it out 1 or 2 full rotations, only at the third full rotation out does the bolt catch. Is that bad? Should I upgrade to a steel bolt catch or something?
Click to expand...
There needs to be about 2.5 threads showing between the end of the buffer tube and the buffer retention post if I remember correctly. 

 
Wo1f said:
What rail? Mad bull are generally good quality. I had a Viking tactical rail made by them years ago and it was very nice 
Click to expand...
Its an old noveske one that is on a broken aeg I brought for spares years ago. Just waiting on an adaptor ring and might order some shims just incase. 

 
Here’s my MTR, all finished for now :)  mainly cosmetic stuff done to it, with just a modify tan bucking and sixG nub internally. 
 

Replaced broken MTR stock with a MFT Battlelink, fitted Magpul K2 grip, PTS Radian Raptor charging handle, BCM stubby grip and MLOK rail grips up front.  UTG scope mount with vision king VPO on top. 

View attachment 51866

 
Well that’s annoying!! I finally found some time to do some more in the John Wick and all was going great. Upper finished and moved onto the lower. Trigger mechanism in with a little bit of filing to allow the last shot stop/bolt release to move freely. Fitted the fire selector, fine. Then I went to fit the buffer stop that sits just in front of the buffer tube. Bloody shit!

As you can see from the photos, the slot on my Block 1 is rectangular shaped and obviously the actual stop is the same shape as can be seen from the photo with my thumb in it. However the one on the Angry Gun JW lower, as can be seen from the other photo is more of a lozenge shape. The crux of the matter is ‘it don’t fit!’. Has anyone seen a buffer stop that is that shape on an MWS? I assume it is a fault in manufacturing but it looks too well finished.

Short of machining the corners off the stop I have (which would have to be done with a dremel as I no longer have access to a milling machine) I really don’t know how to solve this. Over to  you MWS geniuses for ideas pointers.

Ta.

View attachment 51873

View attachment 51874

 
You sure you haven’t lost it? The parts list on Moaihobby says it comes with a new CNC buffer stop

 
Idiot alert!!! 

Ignore my previous post. I was calling it a night and packing the various JW Kit and MWS parts away and I saw a small sealey bag with a single weird component in. On closer inspection it was the exact shape of the lozenge shaped slot. Poops. All fitted and I am smiling again.

walk away citizens, get on with your lives, nothing to see here....

rocketdogbert said:
You sure you haven’t lost it? The parts list on Moaihobby says it comes with a new CNC buffer stop
Click to expand...


Yep, it was tucked inside another bag of parts that’s was mixed in with some MWS parts. I must have put it in there when I was trying to work out what everything was. 

 
Last edited by a moderator:
Davegolf said:
Have you ever moved your buffer tube before?

Have you removed the buffer and spring, are they in good condition and slide freely down the buffer tube?

Also the buffer bumper/plunger.

What FPS is it shooting at?

Is the piston seal in good order / lightly silicone greased?
Click to expand...
The rifle is brand new. Never moved the buffer tube until last night. I checked the buffer and buffer spring. Spring is stock but looks good condition, buffer is aftermarket brand new angry gun light weight buffer. It is shooting 450 fps on .2 bbs. 

 
the3rdlegion said:
The rifle is brand new. Never moved the buffer tube until last night. I checked the buffer and buffer spring. Spring is stock but looks good condition, buffer is aftermarket brand new angry gun light weight buffer. It is shooting 450 fps on .2 bbs. 
Click to expand...
Have you done anything to the nozzle at all? Fit an NPAS etc? If so, change it back and let us know if that fixes it.

have you lubed up your ZET plate in the lower by any chance? Grease etc will slow it down dramatically 

 
This is a curiosity question more than anything, would you see any noticeable difference in performance or glass efficiency by installing a longer inner barrel and using an NPAS to bring the FPS back down? What made me all is my dad found with his CO2 sniper that putting a reducer before the nozzle improved accuracy as the BB moved slower over the hop up rubber

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
715
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top