• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

osteoshot said:
New specna arms

SPECNA ARMS SA-A27-M CARBINE / BLACK

It's official I'm a fully paid up specna arms fanboy 

load it with a 7.4 lipo 330 fps

set hop for .28 loaded it up and watched them fly out accurately to a distance that scared my sorted Tokyo Marui 

No play in any parts, m-lok that works and solidly built with a full metal body

i simply cannot fault this Aeg at the price point, if the gear box and hop alignment is good for the inferno gen 2 HPA engine that is going in it I will be a very happy bunny.

View attachment 50993
Click to expand...
Update, the gen 2 fitted with only minor adjustments to the trigger and Spring guide 

alignment was perfect.

very happy at this price and rock solid

 
Top the black hides the dodgy trades and is more authentic.  People don't tend to sandpaper real Glocks. ;)

 
I think you'll find there all steel slide, if you mean a real one.

 
They do offer a grey/silver finish on the slides on some guns.  But it is a Glock and in the US at least there is literally no limit to the colour/paint/modding/aftermarket parts you can get for Glocks.

 
BigAl said:
I think you'll find there all steel slide, if you mean a real one.
Click to expand...


TheFull9 said:
They do offer a grey/silver finish on the slides on some guns.  But it is a Glock and in the US at least there is literally no limit to the colour/paint/modding/aftermarket parts you can get for Glocks.
Click to expand...
My apologies I didn’t use my words correctly 

he purchased one and the *steel slide* was uncoated 

 
BigAl said:
Top the black hides the dodgy trades and is more authentic.  People don't tend to sandpaper real Glocks. ;)
Click to expand...


True, but these are airsoft toys, not real guns ?

Also the black slide has proper trademarks ?

 
Didn't see trades, see black finish disguises them.  As for raw finish yes but they then coat them unless you mean stainless steel.  Either way they don't have paint in the cocking serrations where the sandpaper guy could't quite get in there.  Also if you leave it raw, especially an airsoft toffee one it will tarnish in no time.  Short answer, stick with top slide.

 
I'm not taken by either particularly. One of these days I will pick up a glock with a plastic slide and barrel. I'll stipple the whole thing from the barrel to the mag base. Just for shits and giggles.

 
BigAl said:
Didn't see trades, see black finish disguises them.  As for raw finish yes but they then coat them unless you mean stainless steel.  Either way they don't have paint in the cocking serrations where the sandpaper guy could't quite get in there.  Also if you leave it raw, especially an airsoft toffee one it will tarnish in no time.  Short answer, stick with top slide.
Click to expand...


Polished slide is coated to protect from the elements. Paint was left in the serrations on purpose as well, I like the look. 

 
Thanks mate already got in with the local team and was lucky enough to get my ukara membership and the ladd was selling this. Got a really good deal @BigAl

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
240
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
493
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
646
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
927
ButcherBill
ButcherBill
Back
Top