THE TM MWS thread

[RossF]

Have changed from edit permissions to comment permission and maybe every week or so I’ll add comments into the doc. If it becomes unmanageable I’ll go back to edit permissions and we can always revert if someone ruins it.

 

[LEGXGPF]

For anybody that wants it, here is the link: https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0

Anyone with the link can edit the document so we can use it as a wiki.

If you guys think it’ll be helpful let me know and I’ll post and request sticky.

Great job Man!!! 

 

[Fissure]

Forgot to post the finale on my M4 "RS" build.

Been using it for 5+ games now and finally happy with it. 

Tried a bunch of barrels and rubbers but finally ended up running a prommy 6.03 barrel and a prommy purple bucking. Now it goes straight and as consistent a GBBR can (I think)

Externally there has been zero issues, but internally there has been some. 

1. Almost smashed up my bolt against the upper ring on the ... lower. The RS buffer tube is a bit longer internally than the TM buffer so the bolt travels to far back and hits the lower. Spacer in and that problem was solved.

2. Guns modify nozzle v.2 has been acting up. On several occasions the nozzle valve either gets stuck completely or to much resistance making a jump from 1,75 joule to 2,6 joule and over-gassing everything. Stock TM nozzle rectified the issue so far.

So a final post with pics on it. If you have questions regarding the re-threading etc feel free to ask. I will answer as soon as I see it.

View attachment 49255

View attachment 49256

View attachment 49257

View attachment 49258

View attachment 49259

View attachment 49260

View attachment 49261

View attachment 49262

View attachment 49263

View attachment 49264

View attachment 49265

View attachment 49266

View attachment 49267

View attachment 49268

 

[Jimmeh]

View attachment 49264

Hold on - what selector is that? Can we use RS selectors and just take the switch off and put it on the TM barrel? 

 

[Whisky1]

Hello chaps,

So I ordered an NPAS from mlemart

And they sent me the WE open bolt one (silver one). I know it's widely accepted that the mws npas is far better, but is there anyway this one can be used to achieve decent results?

 

[marine]

Hello mates, does anyone run the laylax chamber? If yes what Bucking & nub? 

Thanks 

Hello , I use laylax chamber with nub prometheus and Stock bucking .

Best performance for me actually

Aprox 62-63 meters with 0.30gr BBs and Gas to 1.14J max.

 

[Uncle Pauly]

For anybody that wants it, here is the link: https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0

Anyone with the link can edit the document so we can use it as a wiki.

If you guys think it’ll be helpful let me know and I’ll post and request sticky.

This is great. Good work Ross ?

 

[M.a.r.v.i.n]

For anybody that wants it, here is the link: https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0

Anyone with the link can edit the document so we can use it as a wiki.

If you guys think it’ll be helpful let me know and I’ll post and request sticky.

Great job!! This is really something! Thank you.

 

[Yukarin]

Installed the black MWS NPAS, fps is consistent except every now and then it will spit a BB out at 20fps. I've also noticed that my nozzle sometimes doesn't stay with the hop unit for as long as possible and moves back with the bolt, I will revert back to the old rocket valve soon but just wanted to know if it could be a different problem?

 

[Davegolf]

Sounds like a worn or over lubed bucking, or nozzle binding in bolt.

 

[Fissure]

Hold on - what selector is that? Can we use RS selectors and just take the switch off and put it on the TM barrel? 

That is one of strike systems selectors. Used in combination with a thirdpart ambi selector. Kept the center piece and milled it down and made two recesses in it to accept the selector sides from the strike system selector. Not sure what you mean about the barrel though?

 

[Jimmeh]

That is one of strike systems selectors. Used in combination with a thirdpart ambi selector. Kept the center piece and milled it down and made two recesses in it to accept the selector sides from the strike system selector. Not sure what you mean about the barrel though?

What you called “centre piece” I called the barrel. 

Thats cool though. Was it easy to do? 

 

[LEGXGPF]

Hey everyone. I have question on you. When I done some performance ugrades which is lead to +/- 490 FPS I sometimes have this Issue... When I fully fill the mag with propane, first few shots gas leaking out of the bolt/ejection port. Performace go down and rising with any next shot until gas stop leaking (this take 3-5shots). My theory: I upraded nozzle spring set, nozzle valve and rise performace a lot. It seems that shooting cycle is not completed in that cases, maybe stock springs in trigger not handle that pressure? Its complex system where you need some balance so maybe i have to upgrade buffer spring. Probably SixG HSB from Dave may help solve that problem? Thank you for your help.

 

[Davegolf]

Have you green gas modded the mags?

Sounds like the mags are overfilled, so the first few shots have liquid.

 

[LEGXGPF]

Have you green gas modded the mags?

Sounds like the mags are overfilled, so the first few shots have liquid.

No I dont. Just stock magazine with inserted o ring. (Maybe pressure in propan bottle is bigger than in green gas bottles?)

 

[Davegolf]

No the pressure should be fine.

Is the problem the same of different mags?

Does the first manually cocked shot work fine?

 

[LEGXGPF]

No the pressure should be fine.

Is the problem the same of different mags?

Does the first manually cocked shot work fine?

I have just one mag... ? Need order some from Asia. It is doing from the first shot. 

 

[_FIL_]

To any of the other MTR16 owners out there, how can one replace the inner barrel?

Does anyone know of any videos out there that show how to disassemble it?

 

[Guest]

To any of the other MTR16 owners out there, how can one replace the inner barrel?

Does anyone know of any videos out there that show how to disassemble it?

ALL of the bolts are loctighted, you have a battle on your hands.

There are two barrel nuts, one with a custom pattern

 

[Davegolf]

Use a hot air gun to warm the fasteners, this will soften the loctite making for a much easier job ?