• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Quick Questions & Simple Answers.

Just a quick one, which hop rubbers and barrels are considered best for TM pistols as an upgrade over the stock configuration? Specifically the 1911 Series '70.

 
I don't know that specific pistol, but Lylax nineball parts are meant to be good for TM pistols.

Cheers

G

 
They should be left gassed when stored so the seals don't dry out and degrade

 
MisterG said:
They should be left gassed when stored so the seals don't dry out and degrade
Click to expand...
Yea I know that but they are "FULL" currently wasn't sure if the pressure was a bad thing or not. Could let of a few rounds or leave them as it.

 
Musica said:
Yea I know that but they are "FULL" currently wasn't sure if the pressure was a bad thing or not. Could let of a few rounds or leave them as it.
Click to expand...


They'll be fine, leave them gassed up.

 
 
I've got the first one and can say its OK.  You can leave it on and still get the helmet on/off.

Does not cover the ears though.  I had to put a bit of superglue on the rail mounts to keep them in place.

Yes, if you don't use the helmet you have to change the side panels to use the head strap which isn't quick.

Second one will protect the ears too.

 
Last edited by a moderator:
FreeFrag.UK said:
Just a quick one, which hop rubbers and barrels are considered best for TM pistols as an upgrade over the stock configuration? Specifically the 1911 Series '70.
Click to expand...


I've had good results with modify rubbers and also the laylax? 9 ball, seen others using other maple leaf rubbers with good effect also. Crazy jet barrels the "in thing" at the moment with demonstrated good results.

 
EDcase said:
I've got the first one and can say its OK.  You can leave it on and still get the helmet on/off.

Does not cover the ears though.  I had to put a bit of superglue on the rail mounts to keep them in place.

Yes, if you don't use the helmet you have to change the side panels to use the head strap which isn't quick.

Second one will protect the ears too.
Click to expand...
Same for me as himself , one thing I did with mine I re-drilled a couple of the bolt holes so I could change the angle of the mask to get a much better position on it . ?

djben9 said:
anyone tried these type of face masks?
Click to expand...

 
Real Steel Optics

I’m having trouble finding pre-owned kit, specifically tactical/ red dot, not scopes

People must sell it, but where?

tia

rdb

 
Last edited:
rocketdogbert said:
Real Steel Optics

I’m having trouble finding pre-owned kit, specifically tactical/ red dot, not scopes

People must sell it, but where?

tia

rdb
Click to expand...


Tactical-kit.co.uk have a decent range.  If you're after second hand stuff then real steel advice and sales on Facebook is a good shout. 

 
a 'friend' at work has a Honey Badger....

He is looking at mid caps, anyone recommend any brand that is reliable?, i told him to get a box of ASG M4 mags for £50 as works out £5 / mag.....

anything i can pass on?, i can get let him try my ASGs and ICS ones at the weekend, but thought id ask here as well

 
djben9 said:
a 'friend' at work has a Honey Badger....

He is looking at mid caps, anyone recommend any brand that is reliable?, i told him to get a box of ASG M4 mags for £50 as works out £5 / mag.....

anything i can pass on?, i can get let him try my ASGs and ICS ones at the weekend, but thought id ask here as well
Click to expand...


Ares own mid caps are very good, bit more expensive but feed well and will be totally compatible.

Make sure they are the 2 part ones like this 

https://www.fire-support.co.uk/product/ares-amoeba-140-round-m4-nylon-magazine-tan

 
Last edited by a moderator:
My Gate Titan seems to be having a strop over the SHS/RA High Torque motor it's running. General recommendations seem to be the ASG Ultimate motors but which one? Looking for good trigger response on standard gearing. Not fussed about super high ROF so I was looking at the Infinity 22K or 30K. What's the difference with the "Boost" 30K motors?

 
Lozart said:
My Gate Titan seems to be having a strop over the SHS/RA High Torque motor it's running. General recommendations seem to be the ASG Ultimate motors but which one? Looking for good trigger response on standard gearing. Not fussed about super high ROF so I was looking at the Infinity 22K or 30K. What's the difference with the "Boost" 30K motors?
Click to expand...
The boost is the budget motor. The CNC Ultimate is about as good as it gets at the moment and patrolbase have them on sale. Get the the 30k as it the perfect middle ground.

 
I have an echo 1 RDP spectre and the metal ball bearing under the fire selector switch has fallen out, which means the gun doesn't stay on full or semi auto reliably. Does anyone know where I can get a replacement?

 
You must log in or register to reply here.

Similar threads

N
What grinds your gears on forums
4 5 6
Replies
118
Views
27K
Lyndication
Lyndication
Gunboat Diplomat
Is Discord a terrible alternative to forums or am I just using it wrong
Replies
18
Views
801
BigAl
BigAl
Grave Squirmer
Unable to list new classifieds advert
Replies
6
Views
445
novioman
N
Tank423
Boots for big boys
Replies
18
Views
1K
Tank423
Tank423
E
Sites worth travelling to.......
Replies
16
Views
625
Jaylordofwaargh
Jaylordofwaargh
Back
Top