Ares Amoeba Striker AS-01/AS-02 Owners Thread

[Skara]

Parts arrived today, here's what she looks like

Will swap the suppressor out for something that actually works, wrap the inner barrel in foam to stop it from vibrating and probably fill the stock with foam as well.

Can't wait to test it out this Sunday

View attachment 42305

 

[jay1988]

Hi guys 

Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? 

 

[Solly4568]

Hi guys 

Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? 

While you have the gun apart, I recommend putting a tight bore inner barrel along with a maple leaf hop up rubber and nub in just to make it easier on you, as this will improve accuracy and allow you to lift even heavier bb’s, although mine happily lifts .4 with the standard hop up

 

[jay1988]

Is there a specific inner barrel I should look for as I can seem to find a 550mm one 

 

[E21A]

Edgi dual bore if you’re staying at that length, helps resolve to poor cylinder to barrel ratio 

 

[Skara]

Get a short outer and a 300mm inner. Cylinder volume solved without buying a NEMO kit.

 

[jay1988]

What size spring do people recommend ? I have the upgraded bolt to stainless steel, piston and spring guide also have a ml rubber and nub standard hop up (for now) any insight much appreciated

 

[E21A]

M150 

 

[jay1988]

Roughly what FPS does that put out ? I was looking at the m145 

 

[E21A]

Approx 490 

 

[Solly4568]

I put the m150 in mine with the upgraded bolt, spring etc and I was getting 600fps!!! I am now running a m140 in mine and I am getting a consistent 500fps now 

 

[jay1988]

Right I seem to have another problem slam firing IV fitted piston and spring guide and IV tried the standard Sears  and the lycan 90° sear still slam fires with both anyone got the solution ? 

 

[E21A]

Search bespoke airsoft on YouTube, there a video on it and how to correct 

 

[Solly4568]

Yeah, its to do with your adjustable trigger not being set correctly. you have to fiddle with a few screw then you are golden

 

[jay1988]

This is what I'm stuck on doesn't look like anything needs adjusting

View attachment 43706

 

[Solly4568]

You need to twiddle the screw on the bottom left that goes out of trigger box. That should fix it 

 

[jay1988]

I tried everything no joy I have found out why when Ares made the upgraded pistons they did a 90° and a 45° version I have the 45°one which will not work with lycan sear how ever iv now fitted a m140 spring and new pin and spring guide which is working absolutely fine so gonna leave it as it is 

View attachment 43757

 

[Solly4568]

does anyone know a good place to get 45 sears, my one is so worn it does not hold the bolt !!

 

[ProPain87]

does anyone know a good place to get 45 sears, my one is so worn it does not hold the bolt !!

Stock as01 sears?

 

[ProPain87]

Stock as01 sears?

Sorry I’ll rephrase, are you looking for stock as01 sears? I can post you mine foc if your stuck until you find something more hard wearing ?