• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Oh I see, in that case I would go with the stock return spring and the RA-Tech NPAS ! With that one you can adjust the length of the valve itself quite a bit and go really low with the fps if you wish.

 
Fissure said:
Oh I see, in that case I would go with the stock return spring and the RA-Tech NPAS ! With that one you can adjust the length of the valve itself quite a bit and go really low with the fps if you wish.
Click to expand...
Didn’t work for me. It became very unstable and there was a point where it just dropped off a cliff! 

 
Jimmeh said:
Didn’t work for me. It became very unstable and there was a point where it just dropped off a cliff! 
Click to expand...
Oh so you have the NPAS already, strange! I did try it with a 370mm aps-x barrel and tried to tune it into the cqb limits here (328fps with 0.2bbs) and want to remember it working out pretty well.

But if you already are running stock internals and shooting pretty hot i think you would have to try out either a shorther barrel or one with a bigger bore like 6.04 or even higher. 

 
Last edited by a moderator:
Is there any demand for a standard CQBR front end? What sort of price should I be looking for?

 
Jacket said:
Yeah thinking of changing front end but keeping upper receiver
Click to expand...
You may find someone who wants to convert to a CQBR occasionally but without an upper receiver it will be a tough sell. Though I do know someone who might be interested in the shorter outer barrel. 

 
So I may be in receipt of a TM MWS soon (can't wait) and plan to modify some of the external parts when it arrives.

So i wanted to know if the following can be changed?

Stock: I want to change the stock to a real steel Magpul MOE SL stock. Has anyone fitted one to their MWS? which did you need to use, the civilian or Mil-Spec size and was it a tight fit?

Pistol grip: I want to also change this to a Magpul MOE pistol grip too, again was it a simple fit, does the MWS use only 1 bolt to hold the grip in place. If it did need a little modding what did you have to do?

I plan to leave the rest of the internals stock as i find TM works best for me if i dont touch the innards especially the hop but what, if anything do you guys often change first?

 
Shizbazki said:
So I may be in receipt of a TM MWS soon (can't wait) and plan to modify some of the external parts when it arrives.

So i wanted to know if the following can be changed?

Stock: I want to change the stock to a real steel Magpul MOE SL stock. Has anyone fitted one to their MWS? which did you need to use, the civilian or Mil-Spec size and was it a tight fit?

Pistol grip: I want to also change this to a Magpul MOE pistol grip too, again was it a simple fit, does the MWS use only 1 bolt to hold the grip in place. If it did need a little modding what did you have to do?

I plan to leave the rest of the internals stock as i find TM works best for me if i dont touch the innards especially the hop but what, if anything do you guys often change first?
Click to expand...
I've got an Angrygun buffer tube on mine, but i believe the standard one is milspec too. grip is RS spec and will bolt straight on with no modification. at least to the few ive tried. The only external issue is most rails need an adapter ring.

rocketdogbert said:
What a lot of lovely info.

I fitted a new nub to the MTR tonight?

View attachment 41512
Click to expand...
whats the verdict on the nub?

 
Wo1f said:
I've got an Angrygun buffer tube on mine, but i believe the standard one is milspec too. grip is RS spec and will bolt straight on with no modification. at least to the few ive tried. The only external issue is most rails need an adapter ring.

whats the verdict on the nub?
Click to expand...


Cheers mate, may my wallet say its prayers

 
My quest to fit the AW 300 round drum mag to the MTR took a different tack tonight.

I could not get the TM mag insert (at the top) to reliably be gas tight in the AW adapter. So, I took the plunge, and cut an MTR mag in half.....

View attachment 41810

...along with cutting the top top off the AW adapter, and machined the two to fit together...

View attachment 41809

This will ensure a gas tight seal once they are permanently bonded and screwed ?

 
rocketdogbert said:
My quest to fit the AW 300 round drum mag to the MTR took a different tack tonight.

I could not get the TM mag insert (at the top) to reliably be gas tight in the AW adapter. So, I took the plunge, and cut an MTR mag in half.....

View attachment 41810

...along with cutting the top top off the AW adapter, and machined the two to fit together...

View attachment 41809

This will ensure a gas tight seal once they are permanently bonded and screwed ?
Click to expand...
Bold move I like it. How will you bond it?

 
300.

That test was a 2sec squirt of green gas??

Mag takes about a third of a tin of gas

 
Last edited:
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
720
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
639
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
365
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top