Quick Questions & Simple Answers.

[ImTriggerHappy]

Thanks. Will get this then http://www.ebay.co.uk/itm/371588705207

Can you hard wire it? If not, any good proper mosfets with AB?

You have to hard wire it in. Thats what the wiring you get is for.

 

[Trojan]

You have to hard wire it in. Thats what the wiring you get is for.

Do you know any good, clear tutorials on doing this?

 

[ImTriggerHappy]

Do you know any good, clear tutorials on doing this?

Just search on the Gate website I think they have downloadable manuals if not look on youtube there is bound to be loads of vids.
If you cant solder very well get someone else to do it. Installing a mosfet with badly soldered joints is kind of pointless.

 

[Trojan]

Just search on the Gate website I think they have downloadable manuals if not look on youtube there is bound to be loads of vids.

If you cant solder very well get someone else to do it. Installing a mosfet with badly soldered joints is kind of pointless.

I can solder, I just find it time consuming to setup and stuff. My last Fet, the Hamsterfet died on me.

The Airfet or the NanoAAB? http://www.ebay.co.uk/itm/AirFET-MOSFET-airsoft-AEG-switch-with-passive-brake-feature/191867087023?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D36823%26meid%3Da5c718f9562e4c8fb68d3e1f5442a420%26pid%3D100011%26rk%3D1%26rkt%3D2%26sd%3D190886775123

 

[ImTriggerHappy]

I can solder, I just find it time consuming to setup and stuff. My last Fet, the Hamsterfet died on me.

The Airfet or the NanoAAB? http://www.ebay.co.uk/itm/AirFET-MOSFET-airsoft-AEG-switch-with-passive-brake-feature/191867087023?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D36823%26meid%3Da5c718f9562e4c8fb68d3e1f5442a420%26pid%3D100011%26rk%3D1%26rkt%3D2%26sd%3D190886775123

Gate everytime unless you want to fork out for a spectre. If the fet fails under normal usage they replace it for free, makes it kind of a no brainer.

 

[Trojan]

Gate everytime unless you want to fork out for a spectre. If the fet fails under normal usage they replace it for free, makes it kind of a no brainer.

Isn't that only for a year though? Do you have to ship it back to retailer or manufacturer?

Seriously though, the gate aab is popular, but there are no installs on it. can only find installs for the SSR and other makes - https://www.youtube.com/results?search_query=gate+nanoab+install

 

[Trisnpod]

Can't do red I'm on mobile

Hi, I'm looking around for a cheap springer shotgun around £30-40, maybe £50 if I have to that's decent quality. Preferably I'd have a gun that shoots more than 1 bb per shot but all the ones like that I've seen have been around £50-60. So far I'm considering the AGM shorty, something from the de m47 range, de m56 or de m58. I know the m56 is the best way up of those, but it is a bit above my budget and it doesn't have any sort of sights. How useful are sights, are they important on a gun like this? I've been told that I should spend around £35-40 minimum on a springer shotgun, so would that mean that any gun in that price range would be ok or does it vary by brand? I've seen a lot of guns by bison, are they any good? And I know the de m47 range are cheaper guns, are they any good?

I'm not needing a skirmishable gun, just something to use in the garden or whatever that would be a more fair match against my friends 350fps sniper than my current 180fps springer pistol

 

[ImTriggerHappy]

Isn't that only for a year though? Do you have to ship it back to retailer or manufacturer?

Seriously though, the gate aab is popular, but there are no installs on it. can only find installs for the SSR and other makes - https://www.youtube.com/results?search_query=gate+nanoab+install

Never had one actually fail but would imagine you send it back to the point of sale. Its exactly the same as any double signal wire mosfet to install.
https://www.google.co.uk/search?q=how+to+install+a+gate+mosfet&prmd=vsin&source=lnms&tbm=vid&sa=X&ved=0ahUKEwjx3srN0P_MAhWrDMAKHducApEQ_AUIBygB&biw=360&bih=530&dpr=4

http://www.gatee.eu/technical-support

I am sure that one of the videos will point you in the right direction.

Anything else you are getting a bill for my time ☺

 

[Sitting Duck]

Isn't that only for a year though? Do you have to ship it back to retailer or manufacturer?

Seriously though, the gate aab is popular, but there are no installs on it. can only find installs for the SSR and other makes - https://www.youtube.com/results?search_query=gate+nanoab+install

A seperate mosfet is same install as all others - end of

only exceptions are going to be internal types like spectre ascu or poxy ares/G&G etu malarky

tbh you probably best start a new thread, me personally I'd ease up on juice if gun is often double firing

firstly that is likely to getting close PE if firing 2 shots on semi very often

a decent burst on auto may strip your piston or smash your gears to f*ck

using an AB to counterbalance a gun not fully prepared for high rof/response is not wise imho

Also depending on rof - which you do not state rof or lipo or gearing/motor etc.....

plus if she is double firing I do not wish to know in case by sustained auto she craps out - 1 minor jam can cause havoc even well built high speed builds

As you approach 40rps the old school trigger system can also start to show its age as the mechanical raising of cut off lever to release sprung trolley may not always work 101% flawlessly every time - there is a limit to ye olde trigger switch setup - hence the arrival of non-mechanical switching mosfet/switch units like BTC ASCU etc... for the really mental speed/response freaks out there.

Yes I know plenty use AB mosfets - nowt wrong with that, but a little overspin is fine

do not confuse overspin with nozzle being retracted - that is normal

overspin to me is when piston is say getting piston half retracted or seen in rear box window if gearbox has window

double firing though is way too much overspin - probably hitting 30rps+ most likely on 11.1v

also with that much overspin that she is cycling twice by either running that fast or on a light spring you "may" still get some overspin even with AB

(I said may coz depends a lot on motor's torque if it can slow/stop THAT quickly in reverse polarity against speed it was travelling at)

If your gun is double firing on semi very often and you propose to remedy this by AB fet

then me personally sounds like using using a m120 to get around a bad seal that fires at say 270fps on m100 spring

but a mosfet is a mosfet really - 2 ways to wire in, 2 wire mosfet install = supply/signal wire usually done with dedicated wire or rewiring the gun

or

1 wire install usually when using most of existing wiring in gun, 2 posi wires on same switch contact & other contact is the signal wire back to mosfet

That is it really - 2 ways to wire them in - either/or depending if rewiring gun or not is why people use this or that method mainly

 

[Sitting Duck]

Can't do red I'm on mobile

Hi, I'm looking around for a cheap springer shotgun around £30-40, maybe £50 if I have to that's decent quality. Preferably I'd have a gun that shoots more than 1 bb per shot but all the ones like that I've seen have been around £50-60. So far I'm considering the AGM shorty, something from the de m47 range, de m56 or de m58. I know the m56 is the best way up of those, but it is a bit above my budget and it doesn't have any sort of sights. How useful are sights, are they important on a gun like this? I've been told that I should spend around £35-40 minimum on a springer shotgun, so would that mean that any gun in that price range would be ok or does it vary by brand? I've seen a lot of guns by bison, are they any good? And I know the de m47 range are cheaper guns, are they any good?

I'm not needing a skirmishable gun, just something to use in the garden or whatever that would be a more fair match against my friends 350fps sniper than my current 180fps springer pistol

me personally - get a £30 or so green gas non-blow-back pistol and tear his ar$e up with quick bursts

(please wear good eye-pro ffs)

 

[Trojan]

x

I have a 25 RPS setup. Put thousands of rounds into it and the gearbox has no internal wear. No Piston marks or gear marks whatsoever. My old MOSFET quit on me though. What's so bad about AB Mosfets anyway? Could get a fire support systems £10 FET too, but prefer having AB so I don't worry about countering double shooting.

Having looked into it, a Jefftron v2 drop in is about £50 with a 2 year warranty. Don't think It gets better at that price. Would love burst fire too

 

[Sitting Duck]

I have a 25 RPS setup. Put thousands of rounds into it and the gearbox has no internal wear. No Piston marks or gear marks whatsoever. My old MOSFET quit on me though. What's so bad about AB Mosfets anyway? Could get a fire support systems £10 FET too, but prefer having AB so I don't worry about countering double shooting.

Having looked into it, a Jefftron v2 drop in is about £50 with a 2 year warranty. Don't think It gets better at that price. Would love burst fire too

AB fet's can make motors run a little warmer due to reverse polarity, some may hint at possible shortening the lifespan of motor.

25rps is not what I would expect to be regularly double firing at tbh except on say longer barrel AK where a m95 spring will get near 350fps and thus more likely to double fire more due to lighter spring

End of the day, it is entirely up to people what they do with your gun, to me firing two shots regularly on semi is not wise long term as gun is cycling too fast to complete just one cycle like intended.

That is a clear fact

You may be getting away with it but the gun is talking to you none the less, I'm just pointing that bit out very clearly

But if you are getting away firing two shots on semi, all no wear or riskyness you have no need to worry is all I can say

 

[Trojan]

AB fet's can make motors run a little warmer due to reverse polarity, some may hint at possible shortening the lifespan of motor.

25rps is not what I would expect to be regularly double firing at tbh except on say longer barrel AK where a m95 spring will get near 350fps and thus more likely to double fire more due to lighter spring

End of the day, it is entirely up to people what they do with your gun, to me firing two shots regularly on semi is not wise long term as gun is cycling too fast to complete just one cycle like intended.

That is a clear fact

You may be getting away with it but the gun is talking to you none the less, I'm just pointing that bit out very clearly

But if you are getting away firing two shots on semi, all no wear or riskyness you have no need to worry is all I can say

well... what did you do about it with your m95 on your ak?

 

[Sitting Duck]

Using 18:1 gears plastic gearbox and very fast motor hitting 24.8rps she started double fire now n then

This was using a 7.4v 30c lipo

Use a 20c lipo or accept a bit of overspin on 25c on 7.4v fresh off charge

This was an AK 12 black viper project, full cylinder not sure if it was 509 or 455 barrel I put in there

But keeping her low 20's got her to behave

http://www.airsoft-forums.co.uk/index.php/topic/23635-first-ak12-in-production/page-5

Really should start another thread though as with my replies it's turning into war n peace novel that a quick Question & Answer

 

[Sappysid101]

Can confirm, my gun died on me today. Gearbox fully locked up towards the end of the day, havnt had a chance to take it apart and inspect the damage yet. For those wondering I put a Lonex A1 Titan motor into a Krytac SPR because the 20k motor was getting very hot during semi fire. I run an 11.1c 20c Lipo. I think I'll grab one of those AB mosfets haha.

- Ant

 

[ImTriggerHappy]

Can confirm, my gun died on me today. Gearbox fully locked up towards the end of the day, havnt had a chance to take it apart and inspect the damage yet. For those wondering I put a Lonex A1 Titan motor into a Krytac SPR because the 20k motor was getting very hot during semi fire. I run an 11.1c 20c Lipo. I think I'll grab one of those AB mosfets haha.

- Ant

Dont need an abfet you just need the right motor. A1 is high speed and what you have probably got is pre-engagement. Your piston will be probably be dead but everything else should be ok. Try the A2 or A3 motor instead. A1's are best left on the shelf unless you are building a dedicated high speed box.

 

[Sitting Duck]

tbh - a safe bet would be shs torque or some sort of balanced motor if running 11.1v

faster motors will run warmer or hot - the shs torque is supposed to 16tpa like a zci balanced but pinion on shs is better reviews say

if you got a Krytac - why would bother to rip out/disable the 3034 for the sake of AB, then have to place the AB fet somewhere

The Go-Faster boy racer in all of us wants insane rof/response but at what cost/risk ???

I've finally come to the conclusion on just how fast it is worth pushing UK spec guns....

30rps is about the limit you are going to hit with major work or major f*ckups - and I done a "few"

Yes you can Shortstroke a bit, you can add spacers - which in effect are just putting back spring compression from the missing teeth you removed

But end of the day, unless you are going to do a big amount of work you will be lucky to get much past 30rps on a "normal" UK SSG setup without overspin/pre-cocking/double firing/risk of PE etc.....

Plus torquey motors and slightly faster gears will draw less amps so battery lasts longer and give off less heat

Go a bit nutz if you like - but don't go completely f*cking mental or insane on our UK guns is what I have found out the hard way

I'm no expert - far from it, but it is easy to go tooooooo mad is what I'm saying

your piston could of just stripped on its own or stuff like that but people really need to fully understand the risk of PE

Once they have got their heads around how/why it happens and how close some high rof guns can get...

Then ease up a bit, replace with full metal rack for durability but now you are a little wiser to not take the pi$$ so much

So will reduce risk of PE but going a little less crazy, build remains durable and lasts longer

Yes any risk of PE with metal rack is dangerous as no weak point so you could smash piston gears pinion up if PE occurs

but you are bit wiser so you shouldn't be going too mad so jog on chaps in ya 20's is my thought

Yes I may push to 40 for a laugh now n then but if I want it to last a bit I keep it 30 or just under in my last couple of builds with torque rather than speed motors - the current draw makes quite a difference not using higher speed motors - well winter I might like my hands warmed up from hot motors but in general it is true - balanced motors is what you really should be using

 

[ImTriggerHappy]

tbh - a safe bet would be shs torque or some sort of balanced motor if running 11.1v

Like the two I already mentioned but lower quality? ☺
Edit; that might not be the case anymore as I have seen two relatively new lonex motors crap out recently.

 

[Sitting Duck]

lol

Reason why I pushing SHS Torque is they are cheap £25-£30 and easy to get hold of

They draw about 2/3 of amps of much faster motors so should get more life out of lipo for about maybe 15% lower fire rate than riskier faster motors

SHS gears over zci anyday - if stock gears are knackered grab a 16:1 or 13:1 if you are rebuilding - otherwise leave it as is tbh

(if it ain't broke etc....)

shs blue metal rack pistons if you keep the speed sensible - they are nice and can see why so many use them

(don't think about blue pistons with plastic teeth - they shred like f*ck even if kept at moderate speeds)

you can get say up to 27rps on 12:1 with torque motor on just 7.4v - that is fresh off charge 7.4v 25c lipo

or

get just over 30-32rps if you like everything running very warm to hot and your 7.4v draining quicker

so I'm tending to go a little bit easy from now on and realise it isn't the gun's performance that needs improving....

It is simply MY OWN SKILLS that still suck and 20's is plenty for many of us

 

[Sappysid101]

I got the A1 because it was listed as the balence motor, I'll recheck when I get a chance.

- Ant