Unread Classifieds since Last Visit
Showing adverts posted in for the last 14 days.
- Past hour
-
Time Left: 6 days and 23 hours
- SALE OR SWAP
- USED
SCAR-L NGRS bundle First scar that’s “working” Parts include: -Prometheus(laylax) Hard gears -Prometheus(laylax) hard piston -Prometheus(laylax) hard piston head -Prometheus(laylax) cylinder head -Prometheus(laylax) tappet plate -Prometheus(laylax) rubber and bucking -Prometheus(laylax) hard anti reversal latch -Fps bearing spring guide -Gate titan ngrs -Lonex steel cylinder -Eagle 6 hard recoil spring -tightbore (can’t remember brand) Needs motor as the stock one broke during install of new parts(I dropped it). I have a spare that I have used to test and the gun fires and feeds- can provide video Personally I’d buy a decent brushless motor to compliment the parts already there. Plus stock parts from this scar (baring the motor for prev stated reasons) A second scar that was used to do the two tone tan and black look. So has bunch of black furniture, long barrel assembly to switch out on the main gun There’s enough parts overall to nearly build another gun barring a pistol grip and hop up unit and motor. you would need to source these parts. There is also a handful of other bits like lonex gears n such that came out of both scars. So if you did build another it wouldn’t be fully stock Reason for selling is once the build finally started to come together I realised I wasn’t that much of a fan of the scar in terms of ergonomics. I have joint hypermobility so I found it to uncomfortable for me personally. great bundle of stuff for anyone wanting into the scar NGRS platform 650 if gone by end of week700.00 GBP
Cleethorpes
- Today
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
For sale vfc m18 Upgrades are gsi non recoiling outer barrel TTI Airsoft Infinity CNC Aluminum One Piece TDC Hop Up Chamber Parabellum flat hop Replaced aluminium inner barrel with tm brass inner barrel Bbu has been polished to improve cycling Steel flat trigger Real steel talon grips Comes with spare stipled black grip, original outer barrel and hop tool £200 plus post and PayPal200.00 GBP
-
This advert is COMPLETED!
- FOR SALE
- USED
For sale old school magpul pts pmags with 2 x ranger plates £45 plus post45.00 GBP
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
2.26" Fast Riser Mount for MRO red dot NEW 15inc shipping15.00 GBP
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
ECWCS level 5 softshell UCP ACU jacket X Large Long Very good condition 55 inc shipping55.00 GBP
-
Time Left: 6 days and 22 hours
- FOR SALE
- NEW
Bought recently but dont like how they fit my face. Never skirmished. I just ordered diffrent model from him that should fit me better so I have this one for sale. I paid 58 but I can sell for 50 inc postage.50.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Emmerson Gear Shooters belt, currently cinched in for 30/32in waist, but would probably go out to 36/38 Sale icludes inner velcro belt, outer velcro/molle belt, 1x Grenade pouch, 1x Dump pouch, 2x M4 mag pouches and 1x pistol mag pouch50.00 GBP
Southampton - GB
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale, FMA Hi-Cut replica helmet. Sale includes helmet, MTP cover, patches, headphones and rail adapters as well as a face covering.50.00 GBP
Southampton
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale, 9mm impact grenade + spare blanks. Can't speak to the provenance of this thing, but it works well on hard surfaces and will come with a tonne of spare blanks that I've not used.40.00 GBP
Southampton
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
KWA-Umarex USP .45 + 2x Magazines and holster. Used, with marks to show, but in perfect working condition. As the stripped photo shows, this has been cleaned and maintained after every use. Both magazines are gas tight and don't leak.120.00 GBP
Southampton
-
Time Left: 6 days and 19 hours
- FOR SALE
- NEW
Salvo precision rattler. Used for half a day, so in near new condition, I just prefer my spear. Will come with orginal leak free mag, salvo case. Unity riser clone, clone 558 holo, this still works but was shit in the glass. Asg b&t tracer unit with manta suppressor cover. Cheek Riser for the stock, and collapsing stock, the stock has a small crack in it, but doesn't affect functionality. £400400.00 GBP
-
-
Time Left: 6 days and 18 hours
- FOR SALE
- NEW
Lightweight, speedsoft-style rifle with full-polymer body. Upgraded with Perun Hybrid V2 MOSFET and a compression upgrade for improved performance and reliability. Shoots around 330–350 FPS with adjustable hop-up. Semi & full-auto, built for fast, aggressive gameplay.330.00 GBP
- GB
-
Time Left: 6 days and 17 hours
- FOR SALE
- USED
TM Storm is not getting the love it deserves due to owning too many NGRS and mainly now on HPA😆 Fully upgraded and a beast of a gun. Specs are -sintered steel bushings, Prometheus hard EG 18:1 gear set, Leviathan V3 optical ETU, Eagle 6 M90 spring, Prometheus Aero cylinder head, Prometheus POM piston Head, Prometheus hard piston, Warhead 35k BASE motor, FPS cylinder, 300mm Prometheus tight bore barrel, Mapleleaf rubber and Omega nub. £440 inc post. Full build can be seen here as this is the rifle used in the guide for Jefftron. Only thing not shown in the guide is the base Warhead 35k motor now fitted. Video showing it all fully working inc bolt stop feature and set to 80% ROF for the real AK experience can be emailed as cannot attach it here😆 https://www.jefftron.cz/upload/leviathan/v3/TM-Storm-disassembly-and-Leviathan-v3_upgrade.pdf440.00 GBP
Cambridge - GB
-
Time Left: 6 days and 16 hours
- FOR SALE
- USED
Article 1, gen 3, one w/ epm mag, stock internals picatinny back plate with qd mount spare o ring kit, speed trigger w/ adjustment screws. £550 posted article 1 gen 3, without mag, maxx hop unit, rear mounting point, speed trigger w/ adjustment screws and spare o ring kit. £550 posted 7” invictus rail with barrel nut £50 posted Vortex strikefire 2 £100 posted 2x ACETECH bifrost rainbow tracers £50 each posted can add tank line and reg for extra. Great bit of kit, won’t be disappointed550.00 GBP
-
Is this still available? -
Time Left: 6 days and 11 hours
- FOR SALE
- USED
Real Sword Type 97 gearbox. largely complete, all gears inside plus a bag of bits. Great for spares. £85 plus a fiver post.85.00 GBP
-
Time Left: 6 days and 11 hours
- FOR SALE
- USED
Real Sword Type 56 gearbox, in full working order. Comes as as seen in pics - no motor/cage an no wiring harness. £85 plus a fiver post.85.00 GBP
Darlington
-
Time Left: 6 days and 11 hours
- FOR SALE
- USED
£50 plus a fiver for post.50.00 GBP
Darlington - GB
-
What is the armpit to armpit measurement please -
Time Left: 6 days and 9 hours
- WANTED
- USED
Looking to buy a stock hicapa100.00 GBP
- GB
- Yesterday
-
Time Left: 6 days and 49 minutes
- FOR SALE
- USED
For sale Specna Arms SA-C02 CORE ex hire (Rifle only) Cycles fine and shoots pretty straight - only issue is the trigger can still be pulled when on safe. Should be a fairly easy fix but i havent the time or patience to give it a go. Missing inner dust cover (see pictures) Postage included in price Payment via Paypal60.00 GBP
-
Time Left: 6 days and 3 minutes
- FOR SALE
- USED
For sale is VFC's gas blowback PPSh-41, serial number #1432 This replica comes with one 120-round casette held within the drum magazine which doubles as a gas reservoir as well as the special tool and plastic protector disk intended to remove the fake rivets holding the hop unit and outer barrel within the barrel shroud. This not been skirmished with, only used for spare parts for my other PPSh until replacement parts arrived. The metal outer surfaces as well as the internals have been cleaned with isopropryl and degreased. A fresh layer of SuperLube has been applied to the high-friction surfaces internally. Gun oil has also been applied to the exterior steel parts as well as the magazine. The four original screws holding the rear tang to the receiver have been replaced with shorter M3x6mm Torx screws with Loctite applied, ensuring they do not work themselves loose during prolonged firing. Rate of fire is obscenely fast and the noise notable. There are issues with accuracy due to the open bolt function and lack of time for the bb to dwell in the hop. The quality of the finish on the stock is also dire. Contrary to what VFC said, real surplus stocks are incompatible with this replica. This is a UK-only sale. Price is £400 plus postage and packaging Any questions or offers please PM me Will send via courier (Parcelforce). Pick-up can be negotiated if the buyer is local (Hampshire Area)400.00 GBP
, Hants - GB
-
Time Left: 5 days and 23 hours
- WANTED
- USED
Looking for a VFC AK74M and ideally magazines to go with it650.00 GBP
-
Time Left: 5 days and 23 hours
- FOR SALE
- USED
We mp5a3 build Includes a2 stock and internal parts Standard barrel Maple leaf hop, .32 preferred Slimline grip and g&p mp5 cree grip Mp5 rail and holo 7x 45rnd mags 1x 30rnd mag600.00 GBP
Crawley - GB
