So I got bored and I hated the look of the cheap MOLLE battery pouches for the stock of your gun.. but at the same time I wanted an external battery rig.. so I bought an stock holder from ant supplies (great guys there!) for £12 and drilled a hole into the side of the stock & inside compartment in the zipped area.
Result? No naked wires, just a nice looking stock concealing a big battery!
Takes two minutes to do with a dremel and a drill bit... now I can carry pretty much any reasonable lipo... 5k or less mah.
I used a 9.6v nimh to take the photos as it was lying around but you can see that you can leave batteries completely concealed and as a plus the stock is aesthetically pleasing
Stock Pouch - http://ant-supplies.co.uk/Pages/StockCheekRestAmmoPouches.aspx
Dimensions: 140mm Long x 47mm High x 35mm wide (flat before the compartment curves up)
Now on the plus side... does any one know where I can get some nice Velcro stickers for the external of the pouch!
Result? No naked wires, just a nice looking stock concealing a big battery!
Takes two minutes to do with a dremel and a drill bit... now I can carry pretty much any reasonable lipo... 5k or less mah.
I used a 9.6v nimh to take the photos as it was lying around but you can see that you can leave batteries completely concealed and as a plus the stock is aesthetically pleasing
Stock Pouch - http://ant-supplies.co.uk/Pages/StockCheekRestAmmoPouches.aspx
Dimensions: 140mm Long x 47mm High x 35mm wide (flat before the compartment curves up)
Now on the plus side... does any one know where I can get some nice Velcro stickers for the external of the pouch!
Last edited by a moderator:
