Upgrades for Nuprol Delta

D

Dannyboy

Members
Joined
Oct 22, 2017
Messages
12
Reaction score
0
Hi all need some help I have a nuprol delta monad and was wondering wat to do to get abit more range and accuracy out of it plus maybe a bit more fps it shoots 285 fps at them moment wanted to try get it as close as can to 350 what  would everyone segest I upgrade first thanks in advance 

 
Last edited by a moderator:
M100 spring and a 60D maple leaf bucking with maple leaf omega nub. Probably set you back £35. 

 
Dannyboy said:
This is helpful ..................not 
Click to expand...
Click to shrink...


Ignore him, hes not been tickled in months..

I personally wouldnt bother upgrading your Nuprol, its an entry level gun and popular opinion is its not even a good entry level (But I have no personal experience or opinion) so I doubt you would get any noticeable differences. 

I spent double what my first gun cost on stupid new parts which made hardly any difference and in hindsight I should have saved what I spent and put it towards a better gun.

 
Albiscuit said:
snip

I personally wouldnt bother upgrading your Nuprol, its an entry level gun and popular opinion is its not even a good entry level (But I have no personal experience or opinion) so I doubt you would get any noticeable differences. 

I spent double what my first gun cost on stupid new parts which made hardly any difference and in hindsight I should have saved what I spent and put it towards a better gun.
Click to expand...
Click to shrink...


And I'm on the opposite end of the spectrum lol.

Bought decent guns with etus and mosfets and such (even my vsr 10 and mk23 are already upgraded internals)

Now I'm wishing I bought a cheap cm16, did the research and learnt to put the stuff in myself as I'm scared to dismantle these any further than field strips lol

 
Last edited by a moderator:
I’d suggest giving the box a service first, check all the air seal components, your stock FPS should be higher than that.

I will agree Nuprol guns are hit and miss though, I have met people who swear by theirs, but have also met the poor sod who bought 1 and stripped a piston on its first hour, and got it swapped for another and it died within 2 hours.

Once you have done your service and made sure your air seal is top notch, then let us know what FPS is like(it should improve, and when it does, so will your range and accuracy)

 
Prisce said:
I’d suggest giving the box a service first, check all the air seal components, your stock FPS should be higher than that.

I will agree Nuprol guns are hit and miss though, I have met people who swear by theirs, but have also met the poor sod who bought 1 and stripped a piston on its first hour, and got it swapped for another and it died within 2 hours.

Once you have done your service and made sure your air seal is top notch, then let us know what FPS is like(it should improve, and when it does, so will your range and accuracy)
Click to expand...
Click to shrink...


True this ^
It happened to my Krytac, when I got it, it shot 300fps
Took it to a tech for a full service and lubrication and such (i bought it preowned so I wanted it doing properly). He replaced 1 o ring on it,and now it shoots 340+ and even shoots hot on occasion lol.

 
Thank u all for the help apart from the one guy we can all guess who lol will check gun over and service it and will get back to u all 

 
Prisce said:
I’d suggest giving the box a service first, check all the air seal components, your stock FPS should be higher than that.

I will agree Nuprol guns are hit and miss though, I have met people who swear by theirs, but have also met the poor sod who bought 1 and stripped a piston on its first hour, and got it swapped for another and it died within 2 hours.

Once you have done your service and made sure your air seal is top notch, then let us know what FPS is like(it should improve, and when it does, so will your range and accuracy)
Click to expand...
Click to shrink...
Problem then is you have invalidated any warranty!!

 
LightningCh said:
And I'm on the opposite end of the spectrum lol.

Bought decent guns with etus and mosfets and such (even my vsr 10 and mk23 are already upgraded internals)

Now I'm wishing I bought a cheap cm16, did the research and learnt to put the stuff in myself as I'm scared to dismantle these any further than field strips lol
Click to expand...
Click to shrink...


I cant wait to buy a decent gun I can just use out of the box and know its going to work fine and not have to want to open it up!

My CM16 has been the biggest waste of money for me, it works fine yes. But have spent waaaay more on it than I should have on pointless upgrades.

Oh and I still regret messing about with my MK23 :(  

 
Albiscuit said:
I cant wait to buy a decent gun I can just use out of the box and know its going to work fine and not have to want to open it up!

My CM16 has been the biggest waste of money for me, it works fine yes. But have spent waaaay more on it than I should have on pointless upgrades.

Oh and I still regret messing about with my MK23 :(  
Click to expand...
Click to shrink...
What did you do to your Mk23?

 
New barrel, hop, TDC mod.

It has not shot right since doing it and to be fair didnt need doing at all lol. 

I think its something about the hop, but as all my mags leak I cant test it anyway. 

 
Hmm, I did the same to mine and it dramatically improved it. Let us know when you get a mag back as to what’s exactly happening. I’d be interested in finding the cause of your issues.

 
You must log in or register to reply here.
Back
Top