Trigger response.

[og123]

Hello, I have a umarex hk ump 45. I was wandering if anyone knows how I can improve the trigger response other than using a new battery because my gun can only fit up to an 8.4.

How can I improve trigger response ?

Thanks!

 

[Monty]

Mosfet and a Lipo.

 

[ImTriggerHappy]

React faster.

 

[jcheeseright]

hardwired MOSFET, Gate Nano is a good option.

7.4v LiPo will give you a bit of a boost over your current 8.4v NiMh.

 

[Sitting Duck]

Unsure of motor type used

SIG uses medium motor

Otherwise I'd say use a SHS speed motor or fast neodym motor

Really the whole lot should be done

But cheap option is fit deans if ya budget is really tight like a camel's ar$e in a sandstorm

 

[GunmanAirsoft]

Cheapest option is a lipo. Next is a MOSFET as well. After that you're getting into gearbox and motor stuff

 

[og123]

Cheapest option is a lipo. Next is a MOSFET as well. After that you're getting into gearbox and motor stuff

Click to shrink...

Yes I want to get a lipo but the ump can only take the stick/tubular batteries

 

[callumbagshaw]

Consider changing the wiring from Tamiya to Deans too. Apparently you get a better arc, and a faster response as it's gold plating set on brass... but I'm no expert.

 

[Samurai]

Yes I want to get a lipo but the ump can only take the stick/tubular batteries

Click to shrink...

Like this?

http://www.hobbyking.com/hobbyking/store/__84545__Turnigy_nano_tech_1300mAh_2S_25_50C_Lipo_AIRSOFT_Pack_T_connector_UK_Warehouse_.html

 

[GunmanAirsoft]

Yes I want to get a lipo but the ump can only take the stick/tubular batteries

Click to shrink...

That's fine, there's loads of lipos which will fit