Tm 416d inner barrel and m100 spring

[Allen428]

I’ve got a Prometheus inner barrel and a eagle6 m100 spring to fit. Is this easy to do or get a tech to do it?

thanks

 

[Davegolf]

Using the Haynes manual scale;

The inner barrel is a 2 spanner job, the springs is a 5 spanner job.

Spring is involved to get to and on that particular model possible to damage your rear wiring quite easily (assuming sopmod / rear wired)

What tech you done previously?

 

[Allen428]

Ok thank you, I’ve never done anything to a airsoft weapon before, was willing to have a go but not if there’s to much risk doing any damage.

 

[Davegolf]

It's one of those things, if you were tech savvy and generally mechanically minded I'd say go for it, there's plenty of tutorials online.

On the other hand that is a very nice gun and you'll need a stock tube spanner as a 'special tool'.

AEGs can be fiddly to the inexperienced, we all have to start somewhere, just normally on a cheapo gun

 

[Allen428]

Thanks for response. Think I will get someone to do it for me. Have thought for a while about getting a cheap second hand aeg to strip and practice on.