mightyjebus
Members
- Dec 11, 2015
- 1,034
- 1,896
nothing massively exciting but picked up a couple of real Surefire 600's for £30 each and a Klesh 1S for a fiver from the Overlord show on Saturday.
The 'What have you just bought' Thread
- Thread starter Cameron364
- Start date
MrTea
Members
- Aug 22, 2022
- 732
- 567
Sold a couple of RIFs to free up some space and ended up purchasing an AK to continue the Modern Warfare 2 LARP. I could have made it easy on myself and imported/bought the CYMA Legionnaire but I couldn't find any in the UK/EU and didn't feel like importing it from the US. I ended up buying a Specna Arms Core SA-J70 Gen 2 - mainly because it comes with an ETU as standard as uses their newer rotary 'Magnus' hop up making it a much better performing RIF - all for £160.
After some asking around, it seems that the Specna Arms AKs are VFC spec rather than TM so it made fitting the aftermarket parts easier. I had to go to 18Airsoft to find all the parts I needed in stock - APS handguard, APS pistol grip, CYMA VLT stock and the CYMA DTK-1 muzzle break. I had to purchase APS parts as they're VFC spec parts rather than CYMA which (AFAIK) are TM spec.
The handguard required only minor modification to fit the lower half - literally removing 1mm or 2mm of plastic on the very end and it fit right in. The upper half required no work and is a solid fit. The pistol grip had a small tab at the back that required removing to fit. The Specna Arms AK to M4 buffer tube adapter is what needed the most modification - for whatever reason this simply doesn't fit their Core AKs from the factory and required the whole part in the red box removing so it would fit flush against the receiver. I still need to file down the piece under the buffer tube area as this is slightly too thick and prevents the castle nut from threading all the way down.
After i'd managed to test fit everything, I removed all the parts and gave them a coat of Krylon Khaki paint and finished with a matt lacquer to seal it. Most parts took the paint fine except the handguard and pistol grip. They both wrinkled the paint the second I applied lacquer meaning I had to strip it and redo it which was annoying - it was especially annoying as I also forgot to cover the nuts on the handguard this time around so they're now also khaki rather than black.
In this time I also picked up some CYMA waffle mags and an AK picatinny optic rail to finish it all off.
The one thing that annoys me is that optic rail never sits straight when attached, it looks like it's pointing off to the right of the rifle. After some google work, this seems pretty standard across AKs in airsoft. I did my best and shimmed it with velcro and foam so that the iron sights and the optic rail mostly line up. Just need to source a eotech 551 optic and some long, thin 11.1v batteries to fit in the dust cover and it's finished.
After some asking around, it seems that the Specna Arms AKs are VFC spec rather than TM so it made fitting the aftermarket parts easier. I had to go to 18Airsoft to find all the parts I needed in stock - APS handguard, APS pistol grip, CYMA VLT stock and the CYMA DTK-1 muzzle break. I had to purchase APS parts as they're VFC spec parts rather than CYMA which (AFAIK) are TM spec.
The handguard required only minor modification to fit the lower half - literally removing 1mm or 2mm of plastic on the very end and it fit right in. The upper half required no work and is a solid fit. The pistol grip had a small tab at the back that required removing to fit. The Specna Arms AK to M4 buffer tube adapter is what needed the most modification - for whatever reason this simply doesn't fit their Core AKs from the factory and required the whole part in the red box removing so it would fit flush against the receiver. I still need to file down the piece under the buffer tube area as this is slightly too thick and prevents the castle nut from threading all the way down.
After i'd managed to test fit everything, I removed all the parts and gave them a coat of Krylon Khaki paint and finished with a matt lacquer to seal it. Most parts took the paint fine except the handguard and pistol grip. They both wrinkled the paint the second I applied lacquer meaning I had to strip it and redo it which was annoying - it was especially annoying as I also forgot to cover the nuts on the handguard this time around so they're now also khaki rather than black.
In this time I also picked up some CYMA waffle mags and an AK picatinny optic rail to finish it all off.
The one thing that annoys me is that optic rail never sits straight when attached, it looks like it's pointing off to the right of the rifle. After some google work, this seems pretty standard across AKs in airsoft. I did my best and shimmed it with velcro and foam so that the iron sights and the optic rail mostly line up. Just need to source a eotech 551 optic and some long, thin 11.1v batteries to fit in the dust cover and it's finished.
Last edited:
Colin Allen
Members
- Aug 27, 2022
- 2,326
- 3,052
MrTea
Members
- Aug 22, 2022
- 732
- 567
Well damn. The rail from the CM.048A would have been fine then.
Colin Allen
Members
- Aug 27, 2022
- 2,326
- 3,052
Nuprol 1200mAh 11.1v stick batteries fit under AK dust covers.
nuprol.com
LiPo AK Slim Stick Battery 1200mAh-11.1v-20c - Small Tamiya
The 11.1V 1200mAh LiPo AK Slim Battery delivers high output performance for airsoft AK replicas using narrow top cover battery compartments and Small Tamiya connectors.
nuprol.com
ButcherBill
Members
- Aug 10, 2024
- 1,656
- 2,555
Had a couple of packages from FireSupport & Bullseye Sports today...
Bolt, bolt carrier & Birdcage flash hider for the VFC 416, some V3 mags for my VFC GBBR's & some tan rail covers.
I've added an M720V light just for the hell of it.
Bolt, bolt carrier & Birdcage flash hider for the VFC 416, some V3 mags for my VFC GBBR's & some tan rail covers.
I've added an M720V light just for the hell of it.
BigBigJeff
Members
- Oct 17, 2024
- 8
- 15
Just bought an E&C Colt Full trades metal reciever to finish off a URGI I've been building.
This was my first gat back in 2018:
After many changes, this is her now... something something ship of Theseus
This was my first gat back in 2018:
After many changes, this is her now... something something ship of Theseus
frazer900
Members
- Jul 4, 2024
- 111
- 99
ButcherBill
Members
- Aug 10, 2024
- 1,656
- 2,555
Finally got my first delivery from Octogon Airsoft, placed April 29th so took just a little under 5 weeks to get here...
A Double Bell M733
An NWA DOE SMG
& an MP5 Flashlight Handguard
Also my 1st & 2nd order from HeroOutdoors in Canada, placed 18th & 20th April, so a bit longer in transit...
A 3 Point Sling for my M16A2 or A4
A 3 Point Sling for my C7/C8
A Butt Stock Mag Pouch for the A2/A4 sling
An H-Bar Flash Hider for a future build
A Matrix RDS for an MP5 (I just liked the shape)
An M961 torch for my M16A2 build
& another MP5 flashlight Hand Guard for an MP5 (I forgot I'd ordered this one)>
A Double Bell M733
An NWA DOE SMG
& an MP5 Flashlight Handguard
Also my 1st & 2nd order from HeroOutdoors in Canada, placed 18th & 20th April, so a bit longer in transit...
A 3 Point Sling for my M16A2 or A4
A 3 Point Sling for my C7/C8
A Butt Stock Mag Pouch for the A2/A4 sling
An H-Bar Flash Hider for a future build
A Matrix RDS for an MP5 (I just liked the shape)
An M961 torch for my M16A2 build
& another MP5 flashlight Hand Guard for an MP5 (I forgot I'd ordered this one)>
ButcherBill
Members
- Aug 10, 2024
- 1,656
- 2,555
&
An M961 torch for my M16A2 build
& another MP5 flashlight Hand Guard for an MP5 (I forgot I'd ordered this one)
The slippers were from Next & I bought them in November
An M961 torch for my M16A2 build
& another MP5 flashlight Hand Guard for an MP5 (I forgot I'd ordered this one)
The slippers were from Next & I bought them in November
Last edited:
Colin Allen
Members
- Aug 27, 2022
- 2,326
- 3,052
Do men under 70 wear slippers? I hate the bloody things and have never seen the point of them.
ButcherBill
Members
- Aug 10, 2024
- 1,656
- 2,555
I'd be lost without them...
In the house... boots off, slippers on,
Pottering about in the garden... slippers on,
Nipping to the shop... slippers on,
Needing a 2am piss... no slippers (the stains don't come out).
ButcherBill
Members
- Aug 10, 2024
- 1,656
- 2,555
I've got them too... for fancy shop visits.
Yup, I've completely given up on life.
Colin Allen
Members
- Aug 27, 2022
- 2,326
- 3,052
In the house...boots off, socks off or left on depending on temperature.
Pottering about in the garden... backdoor walking sandals on.
Nipping to the shop...boots on.
Needing a 2am piss...doesn't happen.
Cannonfodder
Members
- Aug 10, 2020
- 3,961
- 6,276
Anonymoose
Members
- Oct 19, 2024
- 964
- 1,597
Absolutely criminal.
Anonymoose
Members
- Oct 19, 2024
- 964
- 1,597
New boot goofin'?
Mtemprell
Members
- Mar 8, 2015
- 416
- 398
I had to look up that phrase. Never watched that show before haha.
Similar threads
